Search results for: &#039;usb development module&#039;

WisBlock USB LiPo Solar Power Slot Module RAK19012

Brand: RAKwireless

Modular power board offers USB-C, battery and solar charging to flash and test firmware in WisBlock projects.

$11.50 AUD, inc GST

This Micro-USB cable is 6 ft (1.8 m) long and is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. This cable works with high-speed USB devices.

USB Cable A to Micro-B, 6 ft

Brand: Pololu

$8.20 AUD, inc GST

This Lite carrier board is a development platform designed for the LattePanda Mu compute module, integrating common interfaces with a 3.5-inch standard...

Lite Carrier Board for LattePanda Mu Compute Module (USB 3.0, Ethernet, PCIe 3.0, M.2 M key, HDMI)

Brand: DFRobot

$61.71 AUD, inc GST

MyoWare 2 Muscle Sensor Wireless Kit

The MyoWare® 2 Muscle Sensor Wireless Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides everything you need from...

$234.95 AUD, inc GST

Jetson Nano Development / Expansion Kit Lite Version, Optional Jetson Nano Core Module

Jetson Nano Development / Expansion Kit Lite Version, Optional Jetson Nano Core Module...

$294.95 AUD, inc GST

I2CMini by Excamera Labs

I²CMini is an easy-to-use, open-source tool for controlling I²C devices over USB, 100% compatible with I²CDriver. Its a small friend that will make working with I2C a breeze, especially if they have a Qwiic/Stemma QT or even Grove I2C connector!

$31.95 AUD, inc GST

Explore Particle's M.2 Maker Breakout Board Kit, a versatile development tool featuring Grove, Qwiic, and FeatherWing connectivity for rapid prototyping with B-SoMs & M-SoMs, complete with GPIO, I2C, UART, and SPI interfaces.

Particle M.2 Maker Breakout Board Kit

Brand: Particle

$114.95 AUD, inc GST

Mini-Computer Kit for CM5 (Dual Gigabit, Board and Case)

Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5...

$76.35 AUD, inc GST

Explore the WIZnet W5500 Pico board, featuring RP2040 microcontroller, built-in Ethernet, and PoE capability - perfect for IoT projects requiring network connectivity with the simplicity of Raspberry Pi Pico compatibility.

WIZnet W5500 Pico Board - Ethernet & PoE Ready

Brand: The Pi Hut

$25.95 AUD, inc GST

ESP32-S2-WROVER-I Module with uFL - 4 MB flash and 2 MB PSRAM

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth support, and dual 240 MHz cores. Now get ready to take your IoT designs to the next level with the ESP-S2-WROVER-1 WiFi Module!

$6.95 AUD, inc GST

ESP32-C3 DevKitM-01 - 4 MB SPI Flash - DevKitM-01 ESP32-C3-MINI-1

The ESP32-C3-DevKitC-02 is an entry-level RISC V development board equipped with the ESP32-C3-WROOM-02, a powerful, generic Wi-Fi + Bluetooth LE MCU...

$23.30 AUD, inc GST

ESP32-C3-DevKit-RUST-1 - 4 MB Flash

ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module...

$42.90 AUD, inc GST

WisBlock Dual IO Base Board RAK19001

Brand: RAKwireless

Modular base board with two IO and six sensor slots, GPIO pads and flexible power via USB-C, batteries or solar for compact IoT prototyping.

$21.80 AUD, inc GST

SparkFun Thing Plus - ESP32 WROOM (USB-C)

The USB-C variant of ESP32 Thing Plus is a development board with WiFi, SPP, BLE, Qwiic connector, 21 I/O pins, RGB status LED, and micro SD card slot...

$61.60 AUD, inc GST

Adafruit Sparkle Motion Stick - WLED-friendly USB Stick

The Adafruit Sparkle Motion Stick is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly...

$31.25 AUD, inc GST

ESP32-H2 Microcontroller DevKit (With Presoldered Headers)

ESP32-H2 Microcontroller, 96MHz Processor, ESP32-H2-MINI-1-N4 Module, Built in 4MB Flash, supports BLE/Zigbee/Thread wireless communication...

$11.65 AUD, inc GST

Keep your power bank running with ultra-low power devices using the compact USB-C KeepAlive module, featuring automatic pulse technology to prevent automatic shutoff when powering microcontrollers, Raspberry Pi Picos, or other small electronics.

USB-C Power Bank KeepAlive - Assembled

Brand: The Pi Hut

$15.65 AUD, inc GST

This CAN-to-UART and USB 1.0 communication module integrates a USB interface for easy data debugging through a serial assistant. Compatible with both 3.3V...

Gravity: CAN to TTL Communication Module with SLCAN Protocol

Brand: DFRobot

$35.08 AUD, inc GST

Gowin RUNBER FPGA Development Board

This is a brand-new FPGA Development Board, which adopts the GOWIN GW1N-UV4LQ144 solution. It is a powerful development board with the necessary resources...

$62.40 AUD, inc GST

Adafruit Feather 32u4 Bluefruit LE with Stacking Headers - Assembled

This is the Adafruit Feather 32u4 Bluefruit - Adafruit's take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. It's...

$56.50 AUD, inc GST

ESP32-C6 Microcontroller

ESP32-C6 Microcontroller, WiFi 6 Development Board, 160MHz Single-core Processor, ESP32-C6-MINI-1 Module...

$12.80 AUD, inc GST

Adafruit Feather 32u4 with RFM69HCW Packet Radio - 433MHz

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! Adafruit designed Feather to be a new standard for portable...

$42.95 AUD, inc GST

The Olimex ESP32-POE-ISO-EA is an ESP32-powered WiFi/BLE/Ethernet development board with an external antenna, Power-Over-Ethernet, galvanic isolation and...

Olimex ESP32-POE-ISO-EA Development Board

Brand: The Pi Hut

$69.30 AUD, inc GST

Adafruit Metro ESP32-S2

What's Metro shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices, and a Lipoly charger circuit? What's finishing up testing and nearly ready for fabrication? That's right - its the new Adafruit Metro ESP32-S2! With native USB and a load of PSRAM this board is perfect for use with CircuitPython or Arduino, to add low-cost WiFi while keeping shield-compatibility

$44.70 AUD, inc GST

Sony Spresense Pack - Main Board + Extension Board + Camera

SPRESENSE is a low-power board computer for the IoT that is equipped with a GPS receiver and supports High-Resolution Audio codecs. The board allows for IoT versatility...

$264.95 AUD, inc GST

ESP32-P4 Nano Wi-Fi 6/BLE Dev Board

High-performance RISC-V dual-core development board with Wi-Fi 6, Bluetooth 5/BLE and a wide range of interfaces for efficient edge computing.

$60.95 AUD, inc GST

ESP32-H2-MINI-1 Module - 4MB Flash

Coming soon!ESP32-H2-MINI-1 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that has a rich set of peripherals. This...

$5.20 AUD, inc GST

Seeed Studio XIAO ESP32-C5

Dual-band Wi-Fi 6, Bluetooth 5 LE and Thread on a module smaller than a postage stamp, with battery management built in.

$11.30 AUD, inc GST

Grove Shield for micro:bit v2.0

The Grove shield for micro:bit is a plug-and-play grove extension board for micro:bit, the shield acts as a bridge for micro:bit and our grove system.

$20.90 AUD, inc GST

Argon ONE UP CM5 Laptop (Complete)

Brand: Argon40

Transform your CM5 experience into a portable workstation. It features external GPIO access, M.2 NVMe support, and a rigid aluminium chassis.

$924.95 AUD, inc GST

ESP32-S2-WROVER Module - 4 MB flash and 2 MB PSRAM

$10.50 AUD, inc GST

XIAO ESP32S3 for Meshtastic & LoRa

This thumb-sized LoRa dev kit, featuring the XIAO ESP32S3 and Wio-SX1262 LoRa module, is an ideal starter kit for Meshtastic and LoRa/LoRaWAN projects. Supporting WiFi, BLE, and LoRa, it includes a built-in power management chip and can be extended via IIC, UART, and other GPIO interfaces, with compatibility for Arduino development.

$21.20 AUD, inc GST

PureThermal Mini Pro JST-SR (with FLIR Lepton 3.5)

The new PureThermal Mini Pro JST-SR with Thermal by FLIR is a hackable thermal camera for the FLIR Lepton thermal imaging camera core. Just like its PureThermal...

$674.95 AUD, inc GST

SparkFun RedBoard Artemis

Think of the RedBoard Artemis as just another Arduino... That has BLE. And one megabyte of flash. And runs at less than 1mA. Oh, and it can run TensorFlow models...

$42.70 AUD, inc GST

Robot Driver Board (ESP32)

General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-NOW communications, Compatible with Raspberry Pi and...

$46.05 AUD, inc GST