Search results for: 'stepper motor for cnc'

40 results

1700 Series Face Tapped Stepper Motor Mount (NEMA 17)

Brand: goBILDA
This mount allows you to fasten a NEMA 17 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws.....
$15.15 AUD, inc GST

1700 Series Face Tapped Stepper Motor Mount (NEMA 14)

Brand: goBILDA
This mount allows you to fasten a NEMA 14 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws.....
$13.45 AUD, inc GST

Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors

Brand: Pololu
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket.
$11.40 AUD, inc GST

TB67S581FNG Stepper Motor Driver Carrier

Brand: Pololu
This breakout board for Toshiba’s TB67S581FNG microstepping bipolar stepper motor driver features adjustable current limiting, over-current and...
$11.70 AUD, inc GST

Dual Motor / Bipolar Stepper Module for Yukon

Brand: Pimoroni
Drive two brushed DC motors or one bipolar stepper motor from your Pimoroni Yukon project, with this dual motor driver with adjustable current limiting...
$25.15 AUD, inc GST

STSPIN820 Stepper Motor Driver Carrier

Brand: Pololu
This breakout board for STMicro’s STSPIN820 microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and a wide operating range...
$32.80 AUD, inc GST

Small Stepper Motor

Brand: SparkFun
These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern.
$28.40 AUD, inc GST

5V Geared Stepper Motor

Brand: Waveshare
5V Geared stepper motor
$7.90 AUD, inc GST

Stepper Motor with Cable

Brand: SparkFun
This is a simple, but very powerful stepper motor with a 4-wire cable attached.
$60.50 AUD, inc GST

Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA

Brand: Adafruit
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified...
$37.40 AUD, inc GST

TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)

Brand: Pololu
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an...
$21.40 AUD, inc GST

Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 4.5V, 2 A/Phase

Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in).
$289.95 AUD, inc GST

Adafruit A4988 Stepper Motor Driver Breakout Board

Brand: Adafruit
Stepper motors are used for CNC machines, 3D printers, and whenever else one needs precise, powerful motion. But to get good behavior from steppers you...
$13.20 AUD, inc GST

Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR

Brand: Pololu
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000...
$454.95 AUD, inc GST

TB67S249FTG Stepper Motor Driver Carrier - Full Breakout

Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB67S249FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and...
$25.10 AUD, inc GST

STSPIN820 Stepper Motor Driver Carrier (Header Pins Soldered)

Brand: Pololu
This version of our STSPIN820 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an...
$34.50 AUD, inc GST

Stepper Motor Mount with Hardware - NEMA-17 Sized

Brand: Adafruit
You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one one here!...
$23.25 AUD, inc GST

Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$69.40 AUD, inc GST

A4988 Stepper Motor Driver Carrier (Header Pins Soldered)

Brand: Pololu

This version of Pololu's A4988 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.

$16.15 AUD, inc GST

DRV8825 Stepper Motor Driver Carrier, High Current

Brand: Pololu
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of Pololu's A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in.
$26.35 AUD, inc GST

Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase

Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 8.6 V, allowing for a holding torque of 14 kg-cm (190 oz-in).
$289.95 AUD, inc GST

4Tronix PiStep2 Quad Stepper Motor Control Board for Raspberry Pi

Brand: 4tronix
This neat little board plugs directly into the Raspberry Pi GPIO header and provides 2 or 4 connectors for small stepper motors
$21.80 AUD, inc GST

Steel L-Bracket for NEMA 23 Stepper Motors

Brand: Pololu
This coated steel bracket lets you securely mount typical NEMA 23-size stepper motors to your project. The bracket features two slots for various mounting...
$38.50 AUD, inc GST

Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×16mm, 5.9V, 1 A/Phase

Brand: Pololu
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 2.2 kg-cm (30 oz-in), and each phase draws 1 A at 5.9 V. This stepper motor’s flat profile (21 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.
$154.95 AUD, inc GST

Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase

Brand: Pololu
This NEMA 17-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm (44 oz-in).
$97.65 AUD, inc GST

Stepper Motor: Bipolar, 200 Steps/Rev, 35×36mm, 2.7V, 1 A/Phase

Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 2.7 V, allowing for a holding torque of 1.4 kg-cm (20 oz-in).
$89.10 AUD, inc GST

A4988 Stepper Motor Driver Carrier, Black Edition

Brand: Pololu
Our Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for the original A4988 stepper motor driver carrier. It features a four-layer PCB for better thermal performance, allowing the A4988 microstepping bipolar stepper motor driver to deliver approximately 20% more current than Pololu's two-layer (green) version. Like Pololu's original carrier, the Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling. This board ships with 0.1″ male header pins included but not soldered in.
$16.70 AUD, inc GST

A5984 Stepper Motor Driver Carrier, Adjustable Current, Blue Edition

Brand: Pololu
This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to...
$9.60 AUD, inc GST

Stepper Motor: Bipolar, 200 Steps/Rev, 20×42mm, 4.3V, 0.8 A/Phase

Brand: Pololu
This small NEMA 8-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 800 mA at 4.3 V, allowing for a...
$124.95 AUD, inc GST

Hybrid Stepper Motor for 3D Printer (3.5kg)

Brand: DFRobot
This is another DFRobot customized high quality product. It is a simple 2 phases hybrid stepper motor.
$15.67 AUD, inc GST

SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)

Brand: SparkFun
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less...
$38.70 AUD, inc GST

Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×41mm, 5.7V, 1 A/Phase

Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 5.7 V, allowing for a holding torque of 4 kg-cm (55 oz-in).
$139.95 AUD, inc GST

Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×31.5mm, 5.4V, 1 A/Phase, 4000 CPR

Brand: Pololu
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000...
$464.95 AUD, inc GST

Adafruit TMC2209 Stepper Motor Driver Breakout Board

Brand: Adafruit
Stepper motors are used for CNC machines, 3D printers, and whenever else one needs precise, powerful motion. But to get good behavior from steppers you...
$17.05 AUD, inc GST

Stepper Motor: Bipolar, 200 Steps/Rev, 35×26mm, 7.4V, 0.28 A/Phase

Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in).
$74.10 AUD, inc GST

Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 7.4V, 1 A/Phase

Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 7.4 V, allowing for a holding torque of 9 kg-cm (125 oz-in).
$214.95 AUD, inc GST

Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×18.6mm, 5.4V, 1 A/Phase

Brand: Pololu
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 1.9 kg-cm (26 oz-in), and each phase draws 1 A at 5.4 V. This stepper motor’s flat profile (25.6 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.
$159.95 AUD, inc GST

Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Brand: Pololu
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC)
$58.30 AUD, inc GST

Stepper Motor: Bipolar, 200 Steps/Rev, 35×28mm, 10V, 0.5 A/Phase

Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 500 mA at 10 V, allowing for a holding torque of 1 kg-cm (14 oz-in).
$56.70 AUD, inc GST

Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×11mm, 4.5V, 1 A/Phase

Brand: Pololu
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 1 kg-cm (14 oz-in), and each phase draws 1 A at 4.5 V. This stepper motor’s flat profile (16 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.
$139.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.