Search results for: &#039;san disk extreme&#039;

MicroSD card breakout board+

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards...

$13.20 AUD, inc GST

This simple board breaks out the pins of a microSD card connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

Breakout Board for microSD Card

Brand: Pololu

$8.30 AUD, inc GST

Argon ONE V5 - M.2 NVME Single Slot Expansion Board

Brand: Argon40

Add a single NVMe drive to your Argon One V5 case - perfect for a desktop setup!

$42.65 AUD, inc GST

Add two super-fast NVMe SSDs to your Raspberry Pi 5! Ideal if you need redundancy or just a load more storage on your RPi....

NVMe Base Duo for Raspberry Pi 5 – NVMe Base Duo

Brand: Pimoroni

$65.35 AUD, inc GST

Round Panel Mount Micro SD Card Extender

If you need to add a panel-mount connection that extends a micro SD card, this Round Panel Mount MicroSD Adapter Plug is the easiest and fastest way to...

$18.65 AUD, inc GST

Mini Tower NVMe NAS Kit for Raspberry Pi 5

Brand: Core Electronics

Compact minitower with low-profile cooler and a M.2 NVMe PCIe slot for SSDs; bootable with official OS, a 128x64 OLED for system stats.

$87.50 AUD, inc GST

Argon ONE V5 - M.2 NVME Dual Slot Expansion Board

Brand: Argon40

Add two NVMe drives to your Argon One V5 case - great for a NAS or if you just need that extra space.

$55.75 AUD, inc GST

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.

Breakout Board for microSD Transflash

Brand: SparkFun

$9.90 AUD, inc GST

microSD Sniffer

Brand: SparkFun

When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that.

$22.95 AUD, inc GST

VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record - v4

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis...

$43.40 AUD, inc GST

This compact board breaks out the pins of a microSD card connector necessary to interface with the card through SPI (Serial Peripheral Interface), and it...

Breakout Board for microSD Card with 3.3V Regulator and Level Shifters

Brand: Pololu

$12.60 AUD, inc GST

Micro SD Card PCB Extender

Stop fiddling with micro SD card sockets in the back of your latest gadget during development, and give yourself a little more elbow room with this Small Micro SD...

$7.80 AUD, inc GST

Need more gigabytes on your Pi? Connect a SATA hard disk or SSD to your Raspberry Pi with this compact and high-performance USB to SATA adapter.

Pimoroni SATA Hard Drive to USB Adapter

Brand: Pimoroni

$18.45 AUD, inc GST

Out of stock

52Pi M.2 NVMe SSD Plus 2.5G Ethernet Adapter for Raspberry Pi 5

Brand: 52Pi

Add fast NVMe storage and multi-gig networking to your Pi 5 with a single stacking board, ideal for compact NAS and home-server builds.

$47.70 AUD, inc GST

Rack Mount Enclosure for 5x Raspberry Pi (SSD)

Brand: UCTRONICS

Add more storage to your Pi with the rack mount case with optional SSD mounting

$109.95 AUD, inc GST

This SSD base enclosure for Argon ONE Raspberry Pi cases allows you to fit a 2.5" SSD below your Argon ONE V2/M.2 - a tidy way to add additional fast...

SSD Base Enclosure for Argon ONE Cases

Brand: The Pi Hut

$23.45 AUD, inc GST

The M.2 M Key to SATA3.0 Expansion Card provides 5 SATA 3.0 extension protocols. It can help LattePanda Sigma connect to more data storage drives like...

M.2 M Key to SATA3.0 Expansion Board (Compatible with LattePanda Sigma)

Brand: DFRobot

$41.10 AUD, inc GST

This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino's built-in SD library...

SD Card Shield V4 (Seeed Studio)

Brand: Seeed Studio

$28.60 AUD, inc GST

This is a Pi Hat for Raspberry Pi 4 with SATA port which can insert HDD/SSD for extra storage.

Seeed Dual SATA HAT for Raspberry Pi 4

Brand: Seeed Studio

$60.05 AUD, inc GST

Out of stock

This is the re_computer case - 2.5 inch SSD/HDD Hard Drive Mounting Board suitable for re_computer case. This works perfectly with re_computer case Stackable Frame and makes it look neat whilst adding one 2.5inch hard drive to the set-up.

SSD and HDD Mounting Board for re_computer case (Seeed Studio)

Brand: Seeed Studio

$7.50 AUD, inc GST

Out of stock

Easily upgrade your LattePanda IOTA with our M.2 M-Key Expansion Board. Add a high-speed M.2 NVMe SSD for storage or an AI accelerator card...

LattePanda IOTA M.2 M-Key Expansion Board (NVMe SSD & AI Accel)

Brand: DFRobot

$19.57 AUD, inc GST

The Aluminum alloy SSD cooling vest is compatible with M.2 2280 solid-state drive. Features superior heat dissipation and advanced genetic heating pads...

Aluminum M.2 2280 Solid-state Drive Heat Sink (Compatible with LattePanda Sigma)

Brand: DFRobot

$20.84 AUD, inc GST

With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 10-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown.

SD/MMC Card Breakout

Brand: SparkFun

$19.80 AUD, inc GST

Similar matches

Raspberry Pi Flash Drive 128GB

Brand: Raspberry Pi

The only USB flash drives officially recommended for Raspberry Pi OS.

$59.95 AUD, inc GST

A convenient way to store your files and keep them available while youre on the move.

SanDisk Low Profile 32GB USB 3.2 Flash Drive

Brand: Core Electronics

$38.45 AUD, inc GST

Raspberry Pi Flash Drive 256GB

Brand: Raspberry Pi

The only USB flash drives officially recommended for Raspberry Pi OS

$109.95 AUD, inc GST

SanDisk MAX Endurance microSD Card - 64GB

Brand: Core Electronics

Built for always-on projects that never stop reading and writing. Rated for 30,000 hours of continuous use, so your logger or Pi doesn't randomly stop working because of a worn-out card.

$99.00 AUD, inc GST