Search results for: &#039;microsd card module&#039;

This is a Micro SD card module from DFRobot. The SD Card Module has various applications such as data logging, audio, video, graphics. This module will greatly expand the capbility of an Arduino!

$8.70 AUD, inc GST

MicroSD card breakout board+

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards...

$13.20 AUD, inc GST

This simple board breaks out the pins of a microSD card connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

Breakout Board for microSD Card

Brand: Pololu

$8.30 AUD, inc GST

Adafruit microSD Card BFF Add-On for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of...

$5.50 AUD, inc GST

Breakout Board for microSD Transflash

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.

$9.90 AUD, inc GST

SparkFun Level Shifting microSD Breakout

The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not much bigger than your fingernail, adding mass storage to your project will never be easier.

$10.85 AUD, inc GST

This compact board breaks out the pins of a microSD card connector necessary to interface with the card through SPI (Serial Peripheral Interface), and it...

Breakout Board for microSD Card with 3.3V Regulator and Level Shifters

Brand: Pololu

$12.60 AUD, inc GST

Add an SD slot and prototyping area in a single shield

Arduino SD Proto Shield

Brand: Arduino

$33.70 AUD, inc GST

This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino's built-in SD library...

SD Card Shield V4 (Seeed Studio)

Brand: Seeed Studio

$28.60 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 2 GB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format....

$18.90 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 512 MB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format. What that means is that you wire up like an SD card breakout, and use the SD card libraries you already have for your microcontroller. For example, you can use the built in SD library in Arduino, or for CircuitPython Adafruit have an sdcard library. The breakout will act just like a 512 MB sized card with FAT formatting (it's pre-formatted).

$17.40 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 4 GB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format....

$24.15 AUD, inc GST

SD/MMC Card Breakout

With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 10-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown.

$19.80 AUD, inc GST

USB Type C microSD Card Reader/Writer

This is the cutest little USB C microSD Card Reader/Writer, but don't be fooled by its adorableness! Simply pop the card into the edge and plug...

$12.60 AUD, inc GST

A super fast microSD card reader for all of your Maker needs!

SanDisk USB 3.0 MobileMate MicroSD Reader/Writer for MicroSD cards

Brand: Core Electronics

$23.35 AUD, inc GST

This 2.0” LCD display adopts ST7789V driver chip and has 320*240 color pixels (RGB565), performing excellently in the angle of view (80/80/80/80). It supports SPI(4-wire)...

2.0 320x240 IPS TFT LCD Display with MicroSD Card Breakout (Non-Touch)

Brand: DFRobot

$28.70 AUD, inc GST

Round Panel Mount Micro SD Card Extender

If you need to add a panel-mount connection that extends a micro SD card, this Round Panel Mount MicroSD Adapter Plug is the easiest and fastest way to...

$18.65 AUD, inc GST

Exposing every interface from Raspberry Pi Compute Module 4, the Compute Module 4 IO Board provides a development platform and reference base-board design for Raspberry Pi's most powerful Compute Module yet.

Raspberry Pi Compute Module 4 IO Board

Brand: Raspberry Pi

$87.10 AUD, inc GST

Micro SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with a Micro SD Card Extender . This simple, but effective device...

$13.90 AUD, inc GST

Fermion: 2.8” 320x240 TFT LCD Resistive Touchscreen with MicroSD Card Slot (Breakout)

Brand: DFRobot

With 320x240 color pixels, this 2.8” LCD display module adopts the ILI9341 driver chip and integrates XPT2046 that supports resistive touch.

$42.10 AUD, inc GST

This ST7735S 1.8" TFT Display features a resolution of 128×160 and SPI (4-wire) communication. Integrated with an SD card slot, it allows to easily read...

Fermion: 1.8" 128x160 IPS TFT LCD Display with MicroSD Card Slot (Breakout)

Brand: DFRobot

$14.15 AUD, inc GST

Expand the power of your Nano projects with easy cable connectivity. The Arduino Nano Connector Carrier brings plug-and-play simplicity to the Nano family, making it faster than ever to prototype with Qwiic, Grove, and Modulino modules, and to unlock new potential with onboard microSD storage.

Arduino Nano Connector Carrier

Brand: Arduino

$24.50 AUD, inc GST

2.8 TFT LCD with Cap Touch Breakout Board w/MicroSD Socket

Add some jazz & pizazz to your project with a color capactive touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful!...

$62.40 AUD, inc GST

Your new RP2350-powered, connected desktop companion! Features a 4" square touchscreen, elegant black aluminium stand and RGB backlighting....

Pimoroni Presto – Presto Only

Brand: Pimoroni

$169.95 AUD, inc GST

2.2 18-bit color TFT LCD display with microSD card breakout

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate...

$46.95 AUD, inc GST

Adafruit 1.44 Color TFT LCD Display with MicroSD Card breakout - ST7735R

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate...

$29.95 AUD, inc GST

microSD Sniffer

When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that.

$22.95 AUD, inc GST