Search results for: 'infrared receiver'

Showing results for infrared receiver

50 results

FLIRC USB

Brand: FLIRC
This USB device allows you to use any Remote with your Media Center. Compatible with Windows, OSX and Linux devices.
$36.65 AUD, inc GST

IR (Infrared) Receiver Sensor - TSOP38238

Brand: Adafruit
IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller. To use, connect pin 3...
$3.65 AUD, inc GST

IR Receiver Diode - TSOP38238

Brand: Sparkfun
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes.
$3.75 AUD, inc GST

Digital IR Receiver Module(Arduino Compatible)

Brand: DFRobot
IR is widely used in remoter control. With this IR receiver, the Arduino project is able to receive command from any IR remoter controller if you have the right decoder.
$6.60 AUD, inc GST

Vishay TSOP38438 IR Receiver Module, 38kHz

Brand: Pololu
The Vishay TSOP38438 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range of 2.5 V...
$6.65 AUD, inc GST

Vishay TSSP58P38 IR Detector Module, 38kHz, Automatic Gain (3-Pack)

Brand: Pololu
The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter and the appropriate algorithms to form a distance sensor with a range of up to a few feet. They are sold in packs of three units.
$9.95 AUD, inc GST

TSOP4138 Infrared Receiver

Brand: Core Electronics

Infrared Receiver 2.5-5.5V 38kHz

$1.75 AUD, inc GST

Grove - Infrared Receiver (Seeed Studio)

Brand: Seeed Studio
The Infrared Receiver is used to receive infrared signals and also used for remote control detection. There is a IR detector on the Infrared Receiver which...
$6.90 AUD, inc GST

Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout - STEMMA JST PH 2mm

Brand: Adafruit
For classic 38KHz infrared remote signal reading, we've got a lovely STEMMA IR Receiver but if you want to read infrared signals from remotes with...
$15.80 AUD, inc GST

Adafruit Infrared IR Remote Receiver - STEMMA JST PH 2mm

Brand: Adafruit
A year ago we designed a high-current-output Infrared Transmitter STEMMA which makes it easy to create high-powered IR LED blasters. Now we've sat...
$9.50 AUD, inc GST

Vishay TSOP34156 IR Detector Module, 56kHz

Brand: Pololu
The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tuned for a 56 kHz carrier frequency. This is the IR receiver used in the Pololu IR Beacon.
$6.10 AUD, inc GST

Adafruit Infrared IR Remote Transceiver - STEMMA JST PH 2mm - 940nm Emitter + 38KHz Receiver

Brand: Adafruit
We've got a high-powered infrared emitter board, and a super-sensitive infrared remote receiver board - but why buy two boards when you can pick up...
$11.10 AUD, inc GST

IR Kit For Arduino

Brand: DFRobot
This IR kit provides a remote control capability to your project.
$11.75 AUD, inc GST

Smart Car Cutebot Robot for micro:bit

Brand: Elecfreaks
This fully-assembled and ready-to-rock robot smart car is the nicest We've seen and is incredibly easy to use with a micro:bit and MakeCode. It comes all ready to go, no soldering or screw-driver required. Simply plug in your :bit into the top slot and add three AAA batteries to get moving.
$56.47 AUD, inc GST

Infrared Detector

Brand: Sparkfun
This simple device operates at 940nm and works well for generic IR systems...
$1.60 AUD, inc GST

5V IR Photoelectric Switch (4m)

Brand: DFRobot
This IR break beam sensor works up to 4m with a fast and stable response of 0.5ms. Power the sensor by a voltage of DC 5V. It can be used with Arduino in...
$20.40 AUD, inc GST

Adafruit TSSP77038 38KHz Infrared IR Demodulator Breakout - STEMMA JST PH 2mm

Brand: Adafruit
While designing our IR decoding breakout we noticed the TSSP series of chips from Vishay, these are simpler than more 'remote control' receivers...
$7.05 AUD, inc GST

Xia mi Multi-functional Expansion Board for BBC micro:bit V2

Brand: DFRobot
This is a micro:bit V2-based multi-functional expansion board for programming education. Featuring a small size of 57*87mm and a compact layout, the board ...
$57.30 AUD, inc GST

SparkFun WiFi IR Blaster (ESP8266)

Brand: Sparkfun
Do you want to control your TV via a web-browser? Want to ask Alexa to mute your stereo? Want to schedule triggers to your IR-controlled LED strip? These are all...
$38.10 AUD, inc GST

Seeed XIAO Starter Kit - Microcontroller Development Essentials

Brand: Seeed Studio
Discover the Seeed XIAO Starter Kit - Microcontroller Development Essentials, perfect for beginners and hobbyists. Learn the basics of microcontroller programming with this comprehensive kit featuring the Seeed XIAO board. Ideal for DIY electronics projects and prototyping.
$119.95 AUD, inc GST

Adafruit Sparkle Motion Stick - WLED-friendly USB Stick

Brand: Adafruit
The Adafruit Sparkle Motion Stick is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly...
$31.25 AUD, inc GST

Raspberry Pi 4 Basic Media Center Bundle (2GB)

Brand: Raspberry Pi

Steam all of your media from the comfort of your couch with our Pi 4 based Media Center kits!

$197.63 AUD, inc GST
Similar matches

PIR Infrared Motion Sensor (HC-SR501)

Brand: Core Electronics
PIR sensors often referred to as, "Passive Infrared" or "IR motion" sensors, enable you to sense motion
$1.55 AUD, inc GST

Infrared Line/Object Presence sensor (Adjustable digital output)

Brand: Core Electronics

Why sit around and reflect when you can use this sensor? Perfect for line or object detection.

$1.40 AUD, inc GST

IR Break Beam Sensor (50cm)

Brand: DFRobot
Infrared break-beam sensors are a simple way to detect motion. This IR break beam sensor works up to 50cm with a fast and stable response of
$8.45 AUD, inc GST

IR Break Beam Sensor - 5mm LEDs

Brand: Adafruit
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a...
$13.75 AUD, inc GST

Super-bright 5mm IR LED (25 pack) - 940nm

Brand: Adafruit
Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high...
$15.35 AUD, inc GST

Contact-less Infrared Temperature Sensor

Brand: Waveshare

A contact-less infrared sensor communicating to your dev board through I2C...

$22.45 AUD, inc GST

IR Break Beam Endstop Sensor

Brand: Core Electronics
Add an easy to use end-stop sensor or filament run-out sensor to your printer/project!
$1.40 AUD, inc GST

IR Break Beam Sensor - 3mm LEDs

Brand: Adafruit
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a...
$6.20 AUD, inc GST

DIGITAL IR Transmitter Module(Arduino Compatible)

Brand: DFRobot
IR Transmitter Module is designed for IR communication when paired with IR receiver module.
$6.60 AUD, inc GST

Argon IR Remote for Argon ONE V2 and M.2 Cases

Brand: Argon40

Argon IR Remote for Argon ONE V2 and M.2 Cases.

$16.45 AUD, inc GST

Super-bright 5mm IR LED - 940nm

Brand: Adafruit
Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high...
$1.50 AUD, inc GST

LED - Infrared 950nm

Brand: Sparkfun
This is a very simple, clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC forward voltage and 50mA max forward current.
$2.50 AUD, inc GST

Infrared IR Proximity Sensor for Arduino (10±5mm~80±20mm)

Brand: DFRobot
Infrared IR proximity distance sensor can detect the presence of an object within a distance of 10±5mm to 80±20mm, can be embedded in detection devices...
$6.70 AUD, inc GST

Infrared Laser Distance Sensor (50m/80m)

Brand: DFRobot
This is an infra-red laser distance sensor with impressive range and accuracy for the price ...Read more
$129.95 AUD, inc GST

Miniature Reflective Infrared Optical Sensors - 5 Pack - ITR20001/T

Brand: Adafruit
This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce...
$5.30 AUD, inc GST

Non-contact IR Thermometer Sensor

Brand: DFRobot
We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the sensor reach thermal equilibrium. This can mean longer response times and reading inaccuracies offset by ambient temperature. By contrast, non-contact measurement uses infra-red radiation to measure the temperature and does not require a direct touch. Additionally, this method of measurement can be read quickly and accurately.
$32.35 AUD, inc GST

Grove - Infrared Reflective Sensor v1.2 (Seeed Studio)

Brand: Seeed Studio
Grove - Infrared Reflective Sensor v1.2 can be used for detection of proximity and color of objects. The reflective photosensor - RPR-220 used in this...
$9.45 AUD, inc GST

Infrared Emitter

Brand: Sparkfun
This simple device operates at 940nm and works well for generic IR systems...
$1.55 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.