Unit Controller And Infra Red Remote for LEDs

SKU: CE09220 Brand: Core Electronics

Designed to work in conjunction with WS2811 / WS2812 strip lighting

$28.30 AUD, inc GST
$25.73 AUD, exc GST

Available with a lead time
Expect dispatch between May 07 and May 09

Quantity Discounts:

  • 10-25 $24.95 (exc GST)
  • 25+ $24.44 (exc GST)

Restrictions apply to this equipment as it uses button/coin cell batteries:

  • The equipment is intended to be used in trades, professions or industries
  • The equipment is not intended for sale to the general public
  • The equipment is not intended to be used where children are present
  • You are aware that this equipment may not meet child safety testing requirements as it is not intended to be used by consumers or general public, but rather, is intended to be used in trades, professions or industries in conjunction with the limitations and restrictions listed above
  • You are aware that these restrictions are due to a change in Australian legislation in 2022 for button/coin cell batteries

Button Battery Warning

A declaration of use will need to be submitted during checkout.

- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Remote control offering selectable colours, adjustable brightness, speed of colour change and 4 effects (flash , strobe, fade and smooth transition.) Designed to work in conjunction with WS28x strip lighting  like Neopixels, WS2812, WS2811 etc. Features the super common 2.1mm DC jack power input.

Remote uses CR2025 battery. KEEP OUT OF REACH OF CHILDREN

 

Operation Note: If remote is displaying incorrect colour LED's try the following process to reset it.

Once connected turn off (remove power) via controller - then press reset on remote. Lights should turn on white. Then press the speed button until all colours have been cycled through, once then start cycling through again. Stop on the first green. This indicates the correct mode, and all remote colours should change to the correct corresponding colour on the LED strip. Then press ON. If the colours are still not synced, repeat this process to load the correct code set. The unit will hold this "correct mode" even if power is removed. However if the reset button on remote is pushed then this procedure will need to be carried out again.

Specifications

    • Working Temperature: -20 to 60°C
    • Supply Voltage: 5-24V DC
    • Working Current: <60mA
    • Effects: 358 different ones
    • Max Number of Control Points: 2048 pixels

Remote Control:

    • Power Source: 1 x CR2025 lithium coin cell battery
    • RF Signal: Infra-Red
    • Weight: 25g
    • Dimensions: 90L x 45W x 9H mm

*Specifications are subject to change without notice.

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Addressable RGB LED Controllers

Addressable RGB LED strips are one maker favourite that can really spruce up any project or even b...
Addressable RGB LED strips are one maker favourite that can really spruce up any project or even b...

What Are NeoPixel LEDs?

So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...
So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...

What Are DotStar LEDs (APA102/SK98225)?

So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...
So in case you haven’t heard yet, digital LEDs are the go-to solution for any project that use...

Projects

Aircraft Lighting Model

The aim of this project was to create a working model of the aircraft exterior lighting systems. Ini...
The aim of this project was to create a working model of the aircraft exterior lighting systems. Ini...

Hogwarts Lights

Although there are commercially available lighting kits for Lego models, we found those that are ava...
Although there are commercially available lighting kits for Lego models, we found those that are ava...

Time lapsing in OctoPrint (Properly!)

Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Now that we have decked out our Lulzbot Taz 6 3D Printer with a really nice looking acrylic enclosur...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.