Search results for: 'infrared temperature sensor'

Accurate to ±0.1°C (across -20°C to +50°C) with no calibration required.

This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects...

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor...

The Gravity: SCD41 Infrared CO2 Sensor based on Sensirion SCD41 sensor is a CO2, temperature and humidity three-in-one sensor....

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog...

Wide range, low power temperature sensor outputs an analog voltage that is proportional to the ambient temperature. To use, connect pin 1 (left) to power (between...

This is a K type Thermocouple (Temperature sensor) which is very popular for 3D printers such as Ultimaker and Makerbot. You can hardly damage them or mishandle them.

Linear analogue output Temperature Sensor.

The temperatures sensor responds to the temperature surrounding its probe. The higher the temperature it senses, the more signal it sends out.

Remember when you were a kid and there was a birthday party at the pool and your parents totally embarrassed you by slathering you all over with sunscreen and you...

What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to measure temperatures greater than 100C you will need something with a greater temperature range and resistance. This is the sensor you need! We have used a PT100 resistance type high temperature probe which is often used in industrial applications. Using this probe you can measure a temperature range between 30-350C. The module itself is compatible 3.3V-5.5V supply, so Arduino, STM32 and other microcontrollers are compatible.

The DFRobot LM35 Linear Temperature Sensor is based on the semiconductor LM35 temperature sensor. The DFRobot LM35 Linear Temperature Sensor can be used to detect ambient air temperature.

Your solution for precise and extended range temperature measurements.

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical touch based on body heat and ambient conditions with this small sensor.

The AS6212 digital temperature sensor from AMS provides high-accuracy temperature data combined with excellent power consumption on a small Qwiic board...

The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO2 sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In...