Search results for: 'haptic motor'
Learn
Mini Vibration Motor (10*2.7mm)
Brand: DFRobot
Just as small as a fingernail, this 10*2.7mm mini vibration motor features a strong vibration, low noise, easy to embed, and long lifespan. Powered by voltage from...
$1.70 AUD, inc GST
Vibrating Mini Motor Disc
Brand: Adafruit
*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs...
$3.90 AUD, inc GST
Vibration Motor
Brand: Sparkfun
A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.6V operating range, these units shake crazily at 3V. Once anchored to a PCB or within a pocket, the unit vibrates softly but noticeably. This high quality unit comes with a 3M adhesive backing and reinforced connection wires.
$5.10 AUD, inc GST
Shaftless Vibration Motor 10x3.4mm
Brand: Pololu
This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The shaftless design keeps this motor small: 10 mm in diameter and 3.4 mm in height.
$11.50 AUD, inc GST
Pimoroni DRV2605L Linear Actuator Haptic Breakout
Brand: Pimoroni
This DRV2605L haptic driver breakout with linear actuator will really get you buzzing! The powerful haptic buzz is programmable with a range of built-in patterns, or you can program your own.
$28.50 AUD, inc GST
Mini vibration motor 2.0mm (Seeed Studio)
Brand: Seeed Studio
These tiny little vibration motors are excellent for getting your project noticed without sound or light...
$2.65 AUD, inc GST
3-5V Shaftless Vibration Motor - 10 x 3.7mm
Brand: Core Electronics
This 10mm diameter 3-5V shaftless vibration motor can be used to easily buzz attached components with low power draw and attached gel adhesive on the back.
$2.25 AUD, inc GST
Vibration Motor 11.6×4.6×4.8mm
Brand: Pololu
This tiny DC motor has a shaft with an offset mass that vibrates when it rotates. Motors like this are commonly found in cell phones and other devices that use vibration for tactile feedback. The motor has 1.5″ leads and is encased in a removable rubber sleeve that gives it flat surfaces for mounting and prevents it from chattering against whatever it is mounted to. It is intended for operation around 3 V (2.4 V to 3.5 V recommended).
$11.50 AUD, inc GST
Gravity: Vibration Motor Module For Arduino
Brand: DFRobot
Have you ever wondered how to implement a vibration motor in your project, like you would find in a mobile phone? The latest vibration module in the DFRobot "Gravity" series will give you in-depth understanding of the principles of vibration motors.
$4.30 AUD, inc GST
Shaftless Vibration Motor 8x3.4mm
Brand: Pololu
This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The shaftless design keeps this motor small: 8 mm in diameter and 3.4 mm in height.
$11.70 AUD, inc GST
Shaftless Vibration Motor 10x2.0mm
Brand: Pololu
This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The shaftless design keeps this motor small: 10 mm in diameter and 2.0 mm in height.
$11.70 AUD, inc GST
littleBits Vibration Motor
Brand: LittleBits
The vibration motor is very similar to the device that makes your cellphone shake when you get a text. With this module, you can make anything vibrate and buzz! This module also includes the vibeSnap-- an accessory that helps you attach stuff - like paper, tin foil, or a pipecleaner - to the motor.
$24.99 AUD, inc GST $25.95
Mini vibration motor 2.7mm (Seeed Studio)
Brand: Seeed Studio
These tiny little vibration motors are excellent for getting your project noticed without sound or light.
$2.70 AUD, inc GST
Grove - Vibration Motor (Seeed Studio)
Brand: Seeed Studio
It consists one coin type motor which is a Permanent Magnet coreless DC motor. It vibrates when the input is logic HIGH. It is very easy to drive and Grove...
$3.80 AUD, inc GST
Mini vibration motor SMD (Seeed Studio)
Brand: Seeed Studio
This mini vibration motor worked at 1.3V can be used for multipurposes. Specification: Operating condition Item Specification Condition remark 2-1 Rated...
$2.70 AUD, inc GST
Three Phase Brushless Gimbal Stabilizer Motor
Brand: Sparkfun
A 3-phase DC brushless DC motor has the unique capability of being both a high efficiency, high torque, very smooth motor, as well as the starting point f...
$83.60 AUD, inc GST
Mini vibration motor (Seeed Studio)
Brand: Seeed Studio
Specifications Operating Voltage: 2.2 ~ 3.6V DC Rated Voltage: 3.0V DC Rated Speed: 12,000 @ 2,500rpm Rated Current: 90mA max Stall Current: 120mA max...
$5.15 AUD, inc GST
SparkFun Qwiic Haptic Driver Kit - DA7280
Brand: Sparkfun
The Qwiic Haptic Motor Driver Kit includes an itty-bitty, Linear Resonant Actuator (LRA) vibration motor, wires, and the breakout board for Dialog Semiconductor's...
$28.05 AUD, inc GST
Adafruit DRV2605L Haptic Motor Controller
Brand: Adafruit
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors...
$15.70 AUD, inc GST
Gravity: Haptic Motor Driver for LRA Motors
Brand: DFRobot
Gravity: haptic motor Ddriver module for Linear Resonant Actuator (LRA) motors based on the TM6605 chip. Features a Gravity I2C interface, 44 built-in...
$9.25 AUD, inc GST
Muscle Wire - 0.005" Diameter (1 foot)
Brand: Sparkfun
This 0.005" Muscle Wire® (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it. If you are asking yourself “What sorcery is this?!” We assure you, this isn’t magic, it’s just simple science thanks to shape memory and a change between the wires weaker, low temperature form (martensitic) and its stronger, high temperature form (austenite).
$3.40 AUD, inc GST
SparkFun Haptic Motor Driver - DRV2605L
Brand: Sparkfun
Ready to add some good vibes to your project? Look no further than the SparkFun Haptic Motor Driver. This board breaks out Texas Instruments' DRV2605L Haptic Motor...
$19.80 AUD, inc GST
SparkFun Qwiic Haptic Driver - DA7280
Brand: Sparkfun
The SparkFun Qwiic Haptic Driver includes an itty-bitty, Linear Resonant Actuator (LRA) vibration motor and Dialog Semiconductor's DA7280 motor driver IC for applications...
$21.35 AUD, inc GST
High-Power Simple Motor Controller G2 18v15
Brand: Pololu
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five...
$219.95 AUD, inc GST
RoboClaw 2x60A Motor Controller
Brand: goBilda
The Roboclaw 2x60A motor controller by Ion Motion Control can supply two brushed DC motors with 60 Amps continuous and up to 120 Amps.....
$404.95 AUD, inc GST
Haptic Driver - DA7280 (SMD)
Brand: Sparkfun
DA7280 is a linear resonant actuator (LRA) and eccentric rotating mass (ERM) haptic driver offering automatic closed-loop LRA resonant frequency tracking....
$2.85 AUD, inc GST
Kitronik :GAME ZIP 64 for the BBC micro:bit
Brand: Kitronik
The :GAME ZIP 64 is the ultimate retro handheld gaming platform for the micro:bit. It's got everything; a screen, programmable buttons, haptic feedback and more...
$61.40 AUD, inc GST
micro:bit Wireless Gamepad
Brand: DFRobot
Micro:bit gamepad is an expansion gamepad based on micro:bit. You only need to plug in the micro:bit, it will turn into a wireless remote controller a wireless game...
$33.95 AUD, inc GST
Jrk G2 18v27 USB Motor Controller with Feedback
Brand: Pololu
This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB...
$244.95 AUD, inc GST
Pololu Jrk 21v3 USB Motor Controller with Feedback (Fully Assembled)
Brand: Pololu
The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous output current is approximately 3 A in the recommended operating range of 8–28 V, with derated performance down to 5 V and transient protection to 40 V. The board ships with connectors installed as shown (no soldering required).
$129.95 AUD, inc GST
Kitronik Klip Motor Driver for BBC micro:bit
Brand: Kitronik
The Klip Motor Driver for BBC microbit allows you do more than just drive motors. It breaks out pins 0, 1, 2, 3V & GND from the microbit & connects to ZIP LEDS.
$29.50 AUD, inc GST
Similar matches
RoboClaw 2x15A Motor Controller
Brand: goBilda
The Roboclaw 2x15A motor controller by Ion Motion Control can supply two brushed DC Motors with 15 Amps continuous and...
$179.95 AUD, inc GST
DF15RSMG 360 Degree Motor (20kg)
Brand: DFRobot
This is a most powerful standard servo sized motor from DFRobot so far. The DF15RSMG equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes.
$22.15 AUD, inc GST
Micro Metal DC Geared Motor (6V 50RPM 250g*cm)
Brand: DFRobot
This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes...
$13.50 AUD, inc GST
Jrk G2 18v19 USB Motor Controller with Feedback
Brand: Pololu
This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB...
$179.95 AUD, inc GST
Kitronik ARCADE for MakeCode Arcade
Brand: Kitronik
ARCADE is a programmable gamepad for use with MakeCode Arcade. Develop your coding skills by creating and modding games with Blocks and JavaScript in MakeCode.
$79.60 AUD, inc GST
Pololu Jrk 21v3 USB Motor Controller with Feedback
Brand: Pololu
The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous output current is approximately 3 A in the recommended operating range of 8–28 V, with derated performance down to 5 V and transient protection to 40 V. The board ships with connectors included but not soldered in, allowing for custom installations.
$124.95 AUD, inc GST
Jrk G2 21v3 USB Motor Controller with Feedback
Brand: Pololu
This compact motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB...
$91.30 AUD, inc GST
Servo - Generic High Torque Full Rotation (Standard Size)
Brand: Sparkfun
Here, for all your mechatronic needs, is a simple, high quality continuous full-rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.
$39.65 AUD, inc GST
50:1 Micro Metal Gearmotor
Brand: Pololu
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 51.45:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 250 RPM and 40 mA free-run, 7 oz-in (0.5 kg-cm) and 0.36 A stall.
$40.10 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.