Search results for: 'gas sensor module'

Simple breakout board for the MQ - 3, MQ - 4, MQ - 6, MQ -8, and MQ -137 gas sensors. All you need is VCC at 5V, GND, and a resistor to an ADC, that is it.

Worried about not recognizing the gas around your workplace or other surroundings and environment? Here comes the excellent solutions we offer! Grove - Multichannel Gas Sensor V2 has 4 measuring units, each of them is sensitive to various kinds of gases, which means you are able to get four sets of data at the same time.

This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.

The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When...

Get the most accurate odor detection readings with the DFRobot advanced electronic nose sensors. The Fermion: Arduino e-nose MEMS Odor Detection Sensor...

The long-awaited BME688 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. All over SPI or I2C at a great price!

The Grove - Gas Sensor(MQ2) module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen...

This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm.

Give your next sensor project a nose for gasses with the Adafruit MiCS-5524 Gas Sensor Breakout. This breakout makes it easy to use this nice sensor from SGX Sensortech...

The Fermion: MEMS Methane CH4 Gas Detection Sensor is a solution to gas leakage detection and prevention. With its advanced MEMS technology, compact...

The MQ-9B is a CO and CH4 gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon...

The Grove-Temperature&Humidity&Pressure&Gas Sensor(BME680) is not just a simple Arduino temperature sensor or barometer sensor but is a multiple function sensor that can measure temperature, pressure, humidity, and gas at the same time.

The long awaited BME680 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric...

*sniff* *sniff* ... do you smell that? No need to stick your nose into a carton of milk anymore, you can build a digital nose with the ENS160 Gas Sensor,...

If you want to start playing with sensors, this kit will be the perfect choice for you to get started.

Trust in Fermion: MEMS CO detection sensor for accurate, low-power consumption, and compact carbon monoxide detection with minimal heat generation. Keep...

Get started with the ESP32 and senors with this cute flatpack smart home kit!

 

Air Quality Monitoring and food quality control experts can't go wrong with the selection of ethanol sensors. The Fermion: MEMS Ethanol Content EtOH...

Keep the air in the home or workplace healthy and safe with Fermion: MEMS Arduino nitrogen dioxide sensors. From NO2 detectors to air monitors, the NO2...

BME688 sensor detects VOCs, temp, humidity, pressure. Supports Arduino/IoT via I2C/SPI. AI gas analysis for air quality & smart homes...

The SparkFun BME688 Environmental Sensor combines a gas scanning sensor with temperature, humidity, & barometric pressure sensing for a complete AI sensor...

The factory-calibrated hydrogen fluoride sensor has a variety of signal output methods to meet various communication needs...

A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light.

Gravity BME688 Environmental Sensor is a compact MEMS sensor that provides accurate measurements of temperature, humidity, barometric pressure, and VOC,...

Explore the M5Stack AirQ Environmental Monitor Kit, a comprehensive IoT device that measures PM2.5, CO2, VOC, temperature, and humidity with an e-ink display and cloud connectivity for real-time air quality monitoring.

The SparkFun BME680 Environmental Sensor is a breakout that combines a gas sensor with temperature, humidity and barometric pressure sensing for a complete environmental...

Industrial 6-Channel ESP32-S3 WiFi Relay Module, Supports WiFi / Bluetooth / RS485 control, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation...

Integrate air-quality monitoring into your Portenta or MKR projects, with ultra-low power sensors for both indoor and outdoor environments.

This is an Arduino compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs. Aiming at fast and accurate detection...

This is a small Arduino-compatible ozone sensor module, which can conveniently and accurately measure the concentration of ozone gas in the environment. Can be widely...

The S-NH3-01 is an industrial-grade IP68 rated electrochemical detection of solid polymers with a revolutionary innovative technique in electrochemical detection areas with wide applications in farming, industrial areas, and meteorological monitoring.

Features Low cross-sensitivity to alcohol Standard formaldehyde measurement range: 0 ~ 1000 ppb Long-term stability and 6 years’ service...

Simplify research with the Winsen MH-Z9041A lab-grade methane sensor. Get LEL-accurate CH4 data to Excel in 1-click—no coding required. Includes...

How to choose a gas sensor ? Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable...

The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there’s a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years. The raise of atmospheric CO2 content to some extent results in global climate change. How to accurately measure the carbon dioxide gas concentration is becoming a universal research topic.

BH1750 is a digital Ambient Light Sensor IC with an I2C bus interface. The module does all of the hard work, providing a simple digital value via I2C that represents luminance (Lux).

BH1750FVI is a digital Ambient Light Sensor IC for I2 Cbus interface. This IC is the suitable for obtaining the ambient light data for adjusting LCD and Keypad backlight power of Mobile phone. It is possible to detect wide range at high resolution.

Weight Sensor Module is based on HX711, which is a precision 24-bit analog-to-digital convertor designed for weight scale and industrial control applications to interface directly with a bridge sensor. It not only has a few basic functions, but also contains high integration, fast response, immunity, and other features. This weight sensor lowers the cost of the electronic scale, and at the same time improving the performance and reliability. The input interface is compatible with Arduino I/O port. The output adopts compact terminal that makes the sensor easier to connect. It's the best choose for electronic enthusiast to do some tiny home scale.