Search results for: 'atmega328 arduino board and usb cable'

50 results

USB to UART Converter (CP2102)

Brand: Core Electronics
Easily connect your microcontroller, Raspberry Pi or other electronic projects to your computer with this reliable and easy-to-use USB to UART converter. Featuring the highly-regarded CP2102 chip and plug-and-play functionality, this converter provides a stable and fast connection with minimal setup. Perfect for makers and electronics enthusiasts alike, get started with your next project with this handy tool.
$3.10 AUD, inc GST

USB to TTL Serial UART RS232 Adaptor (PL2303TA)

Brand: Core Electronics
USB to TTL converters are essential for prototyping - they provide a direct interface with the target device. This module connects to your computer USB port and there are 4 wires which connect with your target device.
$5.65 AUD, inc GST

USB to TTL UART RS232 Serial Converter Module PL2303HXA

Brand: Core Electronics
USB to TTL converters are an essential for prototyping - they provide a direct interface with the target device. This module connects to your computer USB port and there are 4 wires which connect with your target device. This model is the bare version of our enclosed model.
$1.25 AUD, inc GST

ATmega328P-PU Atmel AVR Microcontroller

Brand: Core Electronics
8-bit Atmel AVR Microcontroller - MCU 32KB In-system Flash 20MHz 1.8V-5.5V
$8.70 AUD, inc GST

USBasp USBISP 3.3V/5V AVR Programmer

Brand: Core Electronics
This handy little programmer is well known by hobbyists and seasoned AVR coders alike. The drivers are compatible with 32 and 64bit operating systems.
$4.20 AUD, inc GST

USB Cable A to B - 6 Foot

Brand: Sparkfun
This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.
$10.65 AUD, inc GST

USB to Multi-Protocol Serial Cable - RS-232 / TTL UART / RS-485

Brand: Adafruit
No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get...
$51.95 AUD, inc GST

AVR Programming Cable

Brand: Sparkfun
This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces.
$4.40 AUD, inc GST

USB cable - A/MicroB - 3ft

Brand: Adafruit
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino (among other things). Approximately 3 feet /...
$6.50 AUD, inc GST

Reversible USB A to C Cable - 0.8m

Brand: Sparkfun
USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables...
$12.70 AUD, inc GST

Right Angle USB cable - A/MicroB

Brand: Adafruit
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector...
$13.30 AUD, inc GST

USB to TTL Serial Cable

Brand: Sparkfun
This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.
$39.45 AUD, inc GST

USBtinyISP-Arduino bootloader programmer

Brand: DFRobot
This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino.
$18.73 AUD, inc GST

USB to Multi-Protocol Serial Adapter: RS-232 / TTL UART / RS-485

Brand: Adafruit
No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter will be able to get this-connected-to-that. It...
$39.95 AUD, inc GST

USB Serial Light Adapter (Arduino Compatible)

Brand: DFRobot
This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno.
$20.10 AUD, inc GST

USB Cable - Standard A-B - 3 ft/1m

Brand: Adafruit
This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things). 3 feet / 1 meter long...
$11.40 AUD, inc GST

USB micro B Cable with LEDs - Blue and Green - 1 meter

Brand: Adafruit
At first glance this appears to be an ordinary A to micro B USB cable. Plug it in to your device and power supply, and you get a colorful glitter of dozens of little...
$13.55 AUD, inc GST

USB Cable A to Micro-B, 6 ft

Brand: Pololu
This Micro-USB cable is 6 ft (1.8 m) long and is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. This cable works with high-speed USB devices.
$8.20 AUD, inc GST

Pololu USB AVR Programmer

Brand: Pololu
This device is a programmer for AVR-based controllers, such as Pololu's Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building and debugging projects: a TTL-level serial port for general-purpose communication and a SLO-scope for monitoring signals and voltage levels. A USB cable and ISP cable are included.
$50.20 AUD, inc GST

Arduino Uno to Raspberry Pi Adapter

Brand: AB Electronics
This adapter board allows you to use our range of Raspberry Pi boards with the Arduino Uno, Genuino UNO and other Arduino boards which use the same pin layout as the Uno design.
$9.50 AUD, inc GST

Panel Mount Extension USB Cable - Micro B Male to Micro B Female

Brand: Adafruit
Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to...
$10.40 AUD, inc GST
Similar matches

Nano V3.0 Board

Brand: Core Electronics
The Nano V3.0 is compatible with the Arduino Nano V3.0. This is a small, complete, and breadboard-friendly board based on the ATmega328. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
$6.55 AUD, inc GST

Uno R3

Brand: Core Electronics
The Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
$9.95 AUD, inc GST

Arduino Uno R3

Brand: Arduino
The Arduino UNO is the most used board in the family of Arduino boards. If you are starting out with Arduino, this is the board to get.
$49.02 AUD, inc GST

USB A to B cable

Brand: Core Electronics
This USB A to B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.
$0.99 AUD, inc GST

USB Cable A-B for Arduino

Brand: DFRobot
Standard issue USB 2.0 cables. This is the most common A to B Male/Male type peripheral cable. Compatible with most Arduino boards such as Arduino Mega, Romeo, Arduino Duemilanove.
$3.01 AUD, inc GST

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

Brand: Adafruit
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USBSerial conversion...
$19.20 AUD, inc GST

USB A to Micro B Cable

Brand: Core Electronics
This USB A to micro B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.
$0.87 AUD, inc GST

USB A to Mini B Cable

Brand: Core Electronics
This USB A to mini B cable is perfect for connecting microcontrollers to your PC, with a strong braided cable it is sure to last through many projects.
$2.20 AUD, inc GST

Arduino Nano ESP32

Brand: Arduino
This board brings all the power of the well-known ESP32-S3 with the full support of the Arduino ecosystem, allowing makers to explore the world of Arduino and MicroPython without any blocks.
$31.80 AUD, inc GST

Micro USB Breakout Board (Supports OTG)

Brand: Core Electronics

Experiment with USB or add power through an easy-to-use USB power bank.

$2.62 AUD, inc GST

Adafruit USB C Breakout Board - Downstream Connection

Brand: Adafruit
Throw out all those Mini and Micro B USB cables you have in a plastic bin - the next generation of USB connectors is here with USB C! You will start to see these...
$5.40 AUD, inc GST

Pro Mini 05 Board

Brand: Core Electronics
It’s blue! It’s thin! It’s the Pro Mini! This is a 5V board running the 16MHz bootloader. Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need
$4.30 AUD, inc GST

Arduino Micro

Brand: Arduino
The Arduino Micro is a small version of the Arduino Leonardo with two more analog inputs and a breadboard-friendly form factor
$41.70 AUD, inc GST

Arduino Pro Mini 328 - 3.3V/8MHz

Brand: Sparkfun
It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
$19.50 AUD, inc GST

FTDI Serial TTL-232 USB Cable

Brand: Adafruit
Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore...
$38.95 AUD, inc GST

FTDI Serial TTL-232 USB Type C Cable - 3V Power and Logic

Brand: Adafruit
Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to...
$39.95 AUD, inc GST

Snap-In Panel Mount Cable - USB-A Socket to 2 Wires

Brand: Adafruit
This panel mount cable is great for making USB power connections with a panel-mount setup. On the rectangular panel-mount side you get a USB Type A...
$5.05 AUD, inc GST

Gravity: 4Pin I2C/UART Sensor Cable for Arduino - 50cm (10 Pack)

Brand: DFRobot
The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont...
$11.32 AUD, inc GST

USB-A Male Plug to 5-pin Terminal Block

Brand: Adafruit
his is the USB-A Male Plug to 5-pin Terminal Block. If you need to connect to a device with a USB Jack, maybe make your own USB stick or custom cable of sorts -...
$9.65 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.