Search results for: 'air compressor'

24 results

Non-invasive AC Current Sensor (30A max) (Seeed Studio)

Brand: Seeed Studio
What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole...
$9.85 AUD, inc GST

Non-invasive AC Current Sensor (70A max) (Seeed Studio)

Brand: Seeed Studio
Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for...
$20.30 AUD, inc GST

Non-invasive AC Current Sensor (60A max) (Seeed Studio)

Brand: Seeed Studio
Planned Shipment Date:Dec 12, 2014 Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current...
$20.30 AUD, inc GST
Similar matches

370 Mini Vacuum Pump

Brand: DFRobot
This super-easy-to-use air pump with 2.2 LPM flow rate and -58kpa Maximum Vacuum is very suitable for beginners to make inflatable or pneumatic projects...
$9.40 AUD, inc GST

Air Pump and Vacuum DC Motor - 4.5V and 1.8 LPM - ZR320-02PM

Brand: Adafruit
Make inflatables or air-powered projects with this simple air pump. It's great for beginner projects and super easy to use! The pump is basically a DC motor that is powered with ~4.5V and draws about ~600 mA. 5V should be just fine, so you can power it from the same power supply you use for other DC motors or servos.
$15.80 AUD, inc GST

Vacuum Pump - 12V

Brand: Sparkfun
This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own universal gripper using coffee grounds, balloon and some other parts.
$55.65 AUD, inc GST

Gravity: Analog AC Current Sensor

Brand: DFRobot
When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this problem. Using induction you can measure AC current without intrusive methods. Place your AC wire inside the unit, connect the unit to the sensor board using the 3.5mm jack connector and connect the sensor board to an analog input on your microcontroller. Use this sensor to measure AC motors, lighting equipment, air compressors or any other devices that use AC current.
$33.30 AUD, inc GST

Raspberry Pi Cooler Blower Fan

Brand: Core Electronics

A replacement for all kinds of Raspberry Pi 5 Coolers.

$6.42 AUD, inc GST

6V 2-Position 3-Way Air Valve for Arduino

Brand: DFRobot
This practical 2-Position 3-Way Air Valve can be used to change the direction of the air outlet, also can be used as a valve switch...
$6.95 AUD, inc GST

Blower - Squirrel Cage (12V)

Brand: Sparkfun
This DC Blower really moves some air! Pulling about 1Amp @ 12VDC, this blower is rated at 16CFM (although it seems like more to us). We’ve used this blower to build small hovercrafts and to cool off on a hot day, they’re also handy for inflating “transforming” e-textiles garments!
$23.70 AUD, inc GST

Non-invasive AC Current Sensor (100A max) (Seeed Studio)

Brand: Seeed Studio
What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole...
$22.65 AUD, inc GST

Non-invasive AC Current Sensor (15A max) (Seeed Studio)

Brand: Seeed Studio
What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole...
$20.20 AUD, inc GST

Non-invasive AC Current Sensor (20A max) (Seeed Studio)

Brand: Seeed Studio
Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for...
$20.30 AUD, inc GST

Non-invasive AC Current Sensor (5A max) (Seeed Studio)

Brand: Seeed Studio
Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for...
$20.45 AUD, inc GST

6V Air Valve with 2-pin JST PH Connector - FA0520E

Brand: Adafruit
Here's a cool new valve for makers interested in pneumatic systems, hydraulics, inflatables, projects with compressed air, and the like. These air valves, also known by other names like, automatic bleeding valve or air release valve, are typically used to passively release air from a pressurized container.
$6.65 AUD, inc GST

Differential Pressure Sensor (±500pa)

Brand: DFRobot
This high-resolution differential pressure sensor with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance...
$66.30 AUD, inc GST

Air Pump and Vacuum DC Motor - 4.5 V and 2.5 LPM - ZR370-02PM

Brand: Adafruit

Make inflatables or air-powered projects with this simple air pump. It's great for beginner projects and super easy to use! The pump is basically a DC motor, driving an impellor, that is powered with ~4.5V and draws about ~500 mA. 5V should be just fine, so you can power it from the same power supply you use for other DC motors or servos.

$18.70 AUD, inc GST

Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP

Brand: DFRobot
Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP can be calibrated to known air pressure for quick measurement of pipeline air pressure values...
$92.05 AUD, inc GST

Gravity: Analog AC Current Sensor (10A)

Brand: DFRobot

When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. This Gravity: Analog AC Current Sensor comes to the rescue.

$33.90 AUD, inc GST

Flexiforce Pressure Sensor - 100lbs.

Brand: Sparkfun
This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc.
$44.65 AUD, inc GST

12V Solenoid Valve - 3/4" BSP

Brand: Sparkfun
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how? Well, here’s how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the ¾" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.
$22.55 AUD, inc GST

Gravity: Analog AC Current Sensor (5A)

Brand: DFRobot
When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. Gravity: Analog AC Current Sensor comes to the rescue...
$33.95 AUD, inc GST

Liquid Pump - 500GPH (12V)

Brand: Sparkfun
The 12V Electric Marine Submersible non-automatic 500GPH bilge pumps from SEAFLO offer water evacuation activated by a panel or float switch...
$75.20 AUD, inc GST

Non-invasive AC Current Sensor (10A max) (Seeed Studio)

Brand: Seeed Studio
Introduction: What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for...
$20.10 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.