Search results for: &#039;3.7v lithium polymer battery&#039;

Available with a lead time

Solar Lipo Charger (3.7V)

Brand: DFRobot

This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500mA and the connection is simple and convenient. With a solar panel and lithium battery, you can quickly build a solar power system. Nowadays green power, for stationary or mobile projects is becoming highly requested.

$8.20 AUD, inc GST

The S7V8F3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V output from input voltages between 2.7 V and 11.8 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below the regulated voltage. The compact (0.45″ × 0.65″) module has a typical efficiency of over 90% and can deliver 500 mA to 1 A across most of the input voltage range.

Pololu 3.3V Step-Up/Step-Down Voltage Regulator S7V8F3

Brand: Pololu

$16.45 AUD, inc GST

Oh so handy, this little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any USB C...

Adafruit Micro-Lipo Charger for LiPoly Batt with USB Type C Jack

Brand: Adafruit

$11.15 AUD, inc GST

In many applications, we will use lithium batteries as our power solutions. In this kind of application, the most two important things are the power boost and battery...

MP2636 Power Booster & Charger Module

Brand: DFRobot

$13.55 AUD, inc GST

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour.

Lithium Battery Charger

Brand: DFRobot

$20.05 AUD, inc GST

Available with a lead time

Li-polymer Battery HAT, 5V Output, Quick Charge

Brand: Waveshare

Delivers 5V from a 3.7V Li-polymer pack to a Raspberry Pi with bi-directional quick charge, and includes protection and capacity LEDs for safe DIY use.

$31.95 AUD, inc GST

This tiny (0.35″×0.45″) U1V10F3 switching step-up (or boost) voltage regulator efficiently generates 3.3 V from input voltages as low as 0.5 V. Unlike most boost regulators, the U1V10F3 automatically switches to a linear down-regulation mode when the input voltage exceeds the output. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

Pololu 3.3V Step-Up Voltage Regulator U1V10F3

Brand: Pololu

$11.50 AUD, inc GST

Polymer Lithium Ion Battery (LiPo) 3.7V 2000mAh

Welcome to the awesomeness that is LiPo batteries. Polymer Lithium Ion batteries offer superior energy density with this 2000mAh battery being on 5.8mm in height!

$14.45 AUD, inc GST

Polymer Lithium Ion Battery, 18650 Cell (3.7V 2600mAh)

No, these aren’t some sort of weird, blue AA battery, this is actually a 18650 Lithium Ion Cell. These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargable cell at 3.7V with a capacity of 2600mAh. This is a great battery option for those of you who need a simple to install and replace cell with a lot of juice.

$11.45 AUD, inc GST

Polymer Lithium Ion Battery (LiPo) 3.7V 120mAh

Welcome to the awesomeness that is LiPo batteries. Polymer Lithium Ion batteries offer superior energy density with this 120mAh battery being only 5mm in height!

$5.65 AUD, inc GST

Polymer Lithium Ion Battery (LiPo) 3.7V 4400mAh

This Lithium Polymer Ion based battery is a slim, lightweight battery that is perfect for a portable project! LIPO chemistry is the highest energy density chemistry around and due to that, you get nominal 3.7V at 4400mAh!

$28.50 AUD, inc GST

Polymer Lithium Ion Battery (LiPo) 3.7V 6000mAh

$40.45 AUD, inc GST

Polymer Lithium Ion Battery (LiPo) 18650 Cell (3.7V 2600mAh, Solder Tab)

This is the same 18650 Lithium Ion Cell that you know and love, but now includes pre-attached solder tabs! These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargable cell at 3.7V with a capacity of 2600mAh. This battery has been made even better with the attached solder tabs. You now have a much wider range of applications to drop this battery into while still remaining simple to install!

$12.15 AUD, inc GST