NeoPixel LED Outdoor Netting - 40 x 20 LEDs - 1x2 Meter Sizing
Out of Stock
Sign up to get notified when it's available to order.
This ready-to-go NeoPixel LED Outdoor Netting will make it easy to make large grids easy without having to piece together multiple LED strips. It looks like a 40 x 20 RGB LED grid, but requires only a single pin for drawing to the entire 800-point display.
Each net comes with 40 x 20 RGB NeoPixel LEDs, spaced 50mm (2 inch) apart, already wired in a zig-zag pattern. For signal input, give it your classic SK6812/WS2812/NeoPixel data at 5V logic level (it might be OK with 3.3V, but Adafruit don't recommend it). Power it with 12V: while it does seem to light at lower voltages, you'll see the voltage dip by the time it gets to the 'end' of the grid, and also the lights are much dimmer. 12V DC will work best! Draw is 30mA per LED when fully on, so you could need as much as 24A if you try having all the LEDs on at full brightness. However, you can get away with 12V 5A for some simple displays where not all the LEDs are lit.
Adafruit recommend Adafruit's Sparkle Motion board for driving, it comes with an ESP32, level shifted output, and USB PD and DC input for easy 12V supply. You can get started with WLED for a quick start. However, you could use anything that has the ability to drive 800 LEDs.
This netting works well for both indoor and outdoor displays, although Adafruit will caution that outdoor-friendly doesn't mean waterproof: don't dunk these underwater and if the weather is particularly bad it would be good to bring these indoors. They also don't expect it to have excellent UV-resistance so keep it from long-term direct sunlight.
There's lots of attachment points on all four sides, including plastic rings on the top and bottom and plastic-coated-wire loops on the left and right. You could easily 'tile' more of these grids together to make larger displays.
This embedded content is from a site (www.youtube.com, flickr.com, etc) that does not comply with the Do Not Track (DNT) setting now enabled on your browser. Clicking through to the embedded content will allow you to be tracked by the embed provider.
Technical Details
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
- ATmega168-20PU Atmel AVR MicrocontrollerSKU: 002-556-ATMEGA168-20PU Brand: Core Electronics8-bit Microcontroller - MCU 16kB Flash 0.5kB EEPROM 23 I/O Pins.
-
- 1/2W 0.5W Zener Diode Pack 280pcs (3.3V to 47V, 10 of each)SKU: CE05126 Brand: Core Electronics
You'll never fall short of a Zener Diode with this pack. It includes 280 pcs, ...
Videos
View AllGuides
WLED Phone App | Control Addressable LEDs with an ESP32 or ESP8266
WS2812 / NeoPixel Addressable LEDs: Pycom Quickstart Guide
WS2812 / NeoPixel Addressable LEDs: Arduino Quickstart Guide
WS2812 / NeoPixel Addressable LEDs: Particle Quickstart Guide
Projects
Aircraft Lighting Model
HUGE LED Pixel Panel
Time lapsing in OctoPrint (Properly!)
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments