Search results for: 'usb to uart adapters'

ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, USB Port Adapter Board Optional...

This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for ...

No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get...

No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter will be able to get this-connected-to-that. It...

The RP2040 Interfacer is a small low-cost USB to UART and I2C Adapter (both 3.3V) powered by an RP2040 microcontroller that plugs straight into a USB Type-A...

If you're looking to level up your project, the Mega 2560 is a great place to start. It's based on the Atmega2560 chip which provides a huge number of IO pins and functionality.

The 915MHz SiK Telemetry Radio V3 is a lightweight and inexpensive open source radio platform that can allow for ranges of 300m or more out of the box...

Ultra-compact YDLIDAR GS5 LiDAR with 85° FOV, 0.54° resolution & 25klux sunlight resistance. Ideal for robotics and AGVs...

This PWM driver with four adjustment methods supports 5V~24V wide voltage input, and has a load capacity of 10A, which can drive a DC motor of about 10W...

Upgrade your robot navigation and obstacle avoidance with the latest RPLIDAR S3 360 Degree Mini LiDAR. RPLIDAR S3 TOF Laser Range Scanner offers 40m...

ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, USB Port Adapter Board Optional...

RPLIDAR S2 is a new generation of low-cost two-dimensional laser ranging radar, which can perform a 360-degree omni-directional laser ranging scan within...

The A7670G-H 4G Communication Module, featuring Global Coverage and support for LTE-FDD/LTE-TDD/GSM, can be used as a network card for Raspberry Pi and...

The SIM7600G-H-M.2 is the LTE Cat 4 module which supports wireless communication modes of LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS, EDGE, etc. It supports...

The GM73 code reader module is a high-performance code scanner that can capture common 1D and 2D codes like Barcode and QR on labels, papers or even...

TF-Luna is a single-point ranging LiDAR, based on the TOF (Time of Flight) principle. It is mainly used for stable, accurate and high-frame-rate range detection.

The UM7 orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and...

This compact 360° LD19 LiDAR sensor can resist the strong light of 30Klux and thus it is suitable for both indoor and outdoor high-precision distance...

The STEMlab 125-14 Starter Kit is a starter kit for developing FPGA applications that includes a Red Pitaya STEMlab 125-14 board, SD card, Ethernet cable...

Alpha 864s is the latest version of the powerful development board that comes pre-installed with windows 10 on the built-in 64GB, It is not activated but we have not found any limitations due to this. This latest generation has been updated to intel's 8th generation Dual-core M3-8100y with 4 threads and a 3.4Ghz clock and 8Gb of LPDDR3 RAM and a huge 30% increase in power over the previous generation. The built-in Arduino Leonardo co-processor and 2x 50pin GPIO headers with support for I2C, I2S, USB, RS232, UART and RTC give you everything you need to build your next superpowered project.

Squeeeeze down your next ESP32 project to its bare-bones essential with the Adafruit HUZZAH32 Breakout. This breakout is basically the 'big sister' of Adafruit's HUZZAH...

The compact NVIDIA Jetson Nano / Xavier NX carrier board provides multiple interfaces and NVIDIA JetPack support. Ideal for AI and IoT applications...

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you...

A205 is a extended carried board specifically for NVIDIA Jetson Nano / Xavier NX. The rich peripheral interfaces make it suitable for edge areas to meet...

Jetson Xavier NX, cluster, Carrier Board...

The dAISy HAT is the perfect AIS receiver for your Raspberry Pi projects and embedded applications. This two-channel marine AIS receiver works great with...

Need more gigabytes on your Pi? Connect a SATA hard disk or SSD to your Raspberry Pi with this compact and high-performance USB to SATA adapter.

This is a nice solution to wanting to use PS/2 devices (such as Adafruit's capacitive touch pad or magstripe readers). It's also handy if you want to connect a keyboard...

This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a computer, laptop, or on our cigarette power supply to provide our development boards with 5V.

As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a 2.1mm barrel jack socket and a USB C plug - you could use this to power a USB C device from a common wall adapter.

This adaptor allows older-style Raspberry Pi Power Supplies to be used on the newer Raspberry Pi 4 Model B.

This adaptor allows older-style Raspberry Pi Power Supplies to be used on the newer Raspberry Pi 4 Model B.

As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a USB A plug and a USB C socket so your older computer or laptop can...