Search results for: 'usb to rs232 adapter'

This USB to TTL converter combine the USB-232-1 (USB to Single RS232 Adapter) and TTL-232-1 (Port-powered RS232/TTL converter) allows you to convert USB to TTL/CMOS compatible levels and vice versa.

This USB cable adds a DB9 serial port to your computer or laptop. Works with MacOS X, Linux and Windows. Note that this provides (approximately) +-10V serial (RS232)...

This USB Type C cable adds a DB-9 (DE-9) serial port to your computer or laptop. Works with MacOS X, Linux, and Windows. Note that this provides...

The compact NVIDIA Jetson Nano / Xavier NX carrier board provides multiple interfaces and NVIDIA JetPack support. Ideal for AI and IoT applications...

Alpha 864s is the latest version of the powerful development board that comes pre-installed with windows 10 on the built-in 64GB, It is not activated but we have not found any limitations due to this. This latest generation has been updated to intel's 8th generation Dual-core M3-8100y with 4 threads and a 3.4Ghz clock and 8Gb of LPDDR3 RAM and a huge 30% increase in power over the previous generation. The built-in Arduino Leonardo co-processor and 2x 50pin GPIO headers with support for I2C, I2S, USB, RS232, UART and RTC give you everything you need to build your next superpowered project.

A203 is a extended carried board specifically for NVIDIA Jetson Nano / Xavier NX...

The A206 carrier board has nearly the same design and function with NVIDIA® Jetson Xavier™ NX carrier board but could work well with Jetson Nano module,...

Need more gigabytes on your Pi? Connect a SATA hard disk or SSD to your Raspberry Pi with this compact and high-performance USB to SATA adapter.

This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a computer, laptop, or on our cigarette power supply to provide our development boards with 5V.

This is a nice solution to wanting to use PS/2 devices (such as Adafruit's capacitive touch pad or magstripe readers). It's also handy if you want to connect a keyboard...

This adaptor allows older-style Raspberry Pi Power Supplies to be used on the newer Raspberry Pi 4 Model B.

As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a 2.1mm barrel jack socket and a USB C plug - you could use this to power a USB C device from a common wall adapter.

This adaptor allows older-style Raspberry Pi Power Supplies to be used on the newer Raspberry Pi 4 Model B.

As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a USB A plug and a USB C socket so your older computer or laptop can...

FT232RNL USB TO RS232/485/422/TTL Interface Converter, Industrial Isolation

There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn’t one of them. Don’t worry, though, we’ve got you covered. This 6ft converter plugs into your computer’s USB port and provides you with a DB-9 RSR232 connection. After installing the drivers onto your Windows, Mac or RedHat Linux system, the FTDI chipset inside the cable will enumerate as a COM port with a baud rate adjustable to whatever setup you want to connect to.

USB to RS232/485 Serial Converter, Onboard Original FT232RNL Chip, Multiple devices applicable, Multi-OS compatible...

This 2.5" SATA III to USB 3.0 Adapter Cable allows you to connect a standard 2.5" hard drive (HDD or SSD) to your computer. SATA III is like, a...

This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...

USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working modes, Multi-system Compatible...

This USB-to-I²C adapter enables a PC or other USB host to act as the controller on an I²C bus, reading and writing data from I²C target devices connected...