Search results for: 'usb boost converter'

This USB(input) to DC(output) boost converter can step up 5V to 9V/12V with a switch for selecting voltage and a digital LED display for showing output...

The PowerBoost is a USB charger for any single cell (3.7V/4.2V) LiPo/LiIon battery which can power another USB device at the same time.

We're always on the look out for better ways to make projects portable: being able to charge your battery in the most convenient manner will let...

UPDI stands for Unified Program and Debug Interface, but this board is so smol and cute that we will call it the Unusually Playful Device Interfacer and...

Oh no, what is going on with my USB device, it's getting HOT. Queue the USB Charger Doctor. Thanks to this little gadget you will be able to watch and care for your USB device or powered projects.

Convert just about any battery pack to 5V with VERTER - Adafruit's fresh new Buck-Boost power converter. VERTER can take battery voltages from 3-12VDC and output a nice...

Converts any DC voltage between 0.9V and 5V to a steady 5VDC. Can supply up to 600mA output current.

PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and...

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give...

This USB In-Line Voltage and Current Meter with OLED Display is a lot like the Charger Doctor We carry - if the doctor was a talented surgeon who just lost her medical...

Need those tricky split-rail voltages for your vintage electronics? The Adafruit TPS65131 Split Rail Boost Converter generates both positive and negative...

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give...

PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even...

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it...

PowerBoost is the perfect power supply for your portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that...

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

This charger is the only one you need to keep all your Lithium Polymer (LiPoly) or Lithium Ion (LiIon) rechargeable batteries topped up. No matter the power source at your disposal!

The UPS Hat Power Supply Module is an expansion board for LattePanda Alpha and Delta Single Board Computer, featuring 18650 lithium-ion batteries, Type C...

You're probably really used to microcontroller boards with USB, but what about a dev board with two? Two is more than one, so that makes it twice as...

Relive the days when storage was counted out in kilo-bytes not giga-bytes, using the Adafruit Floppy FeatherWing on a Feather board - perfect for...

Welcome to the era of fast charging! 5V/2A Lipo Rider Plus will greatly increase the charging speed, just like flashing lightning.

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

What's a project if it's trapped on your desk? Now you can take your Arduino anywhere you wish with the PowerBoost shield! This stackable shield goes onto your Arduino...

ESP32-S3 Microcontroller, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz...

This board adds two micro HDMI ports to your Alchitry Au or Pt! Each port is configurable as a source or sink via solder jumpers. The board haves a 5V...

Power your Pi with a wide range of input voltages from 3 to 16V!

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with...

The A-Star 32U4 Mini LV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-up/step-down regulator that allows it to be powered efficiently from a 2.7 V to 11.8 V supply. This compact 1.9″ × 0.7″ board breaks out all 26 of the microcontroller’s I/O pins (of which 7 can be used as PWM outputs and 12 as analog inputs), and loading programs is made easier by a Micro-USB interface and a preloaded Arduino-compatible bootloader.

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence...

This unusual cable is sort of the 'ultimate' in USB type C Power Delivery (PD) hacking: good for experienced hardware hackers who are comfortable...

When your Raspberry Pi project requires multiple power supplies, why not check out the new Zero2Go Omini? This multi-input power supply buck-boost converter fits...

RF Explorer Upconverter is a high-performance RF frequency mixer to enable input frequency ranges from 100KHz to 250MHz in RF Explorer Spectrum Analyzer and other devices such as SDR and wideband radios.

The Adafruit Constant Current Boost Converter for LEDs makes driving LEDs easy, whether they're in series or parallel - with a chip that can generate...

The SparkFun Buck-Boost Converter is a handy power accessory board that allows you to fine tune the amount of power your project receives. This converter can take...

This is an industrial grade DC Buck-Boost converter that inputs 8V to 40V and outputs 12V up to 3A or 36W. With tons of heatsinking and protection, this DC...

The Adafruit 12V Bias Voltage Boost Converter uses our new favorite mini-booster, the TI TPS61040, to generate a 12V DC from as little as 3V input. We use...

This DC-DC Boost Converter is well into the heavy duty end of the spectrum @ 150W; as you can tell by the huge toroidal inductor and dual heatsinks.