Search results for: 'rp-sma to sma'

40 results

Female RP-SMA to Male SMA RF Adapter

Brand: Adafruit
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately...
$5.40 AUD, inc GST

Female SMA to Male RP-SMA RF Adapter

Brand: Adafruit

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. 

$5.75 AUD, inc GST

RP-SMA Male to SMA Female Adapter

Brand: Sparkfun
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.
$4.05 AUD, inc GST

SMA Male to RP-SMA Male Adapter

Brand: Sparkfun
This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration.
$4.35 AUD, inc GST

LoRa Fiberglass Antenna Kit; 902-928MHz-3dBi with Antenna Base

Brand: Seeed Studio
LoRa-Fiberglass Antenna-902-928MHz-3 dBi-360mm-Seeed Studios...
$124.95 AUD, inc GST

LoRa Fiberglass Antenna, 860-930MHz, 5dBi, 600mm

Brand: Seeed Studio
Fibreglass LoRa antenna with gain of 8dBi, frequency range 858-878MHz and 130cm length...
$149.95 AUD, inc GST

Steedan MA350 – Low Profile, 5-in-1 Magnetic Mount Combination Ante

Brand: Sparkfun
The Steedan delivers powerful MIMO antenna technology 5G/4G and Wi-Fi 6 2.4/5.8/7.125GHz and a GPS/GLONASS/BeiDou patch antenna for GNSS location services...
$464.95 AUD, inc GST
Similar matches

5.8dBi Fiberglass Antenna - N-Type to RP-SMA - White - 902MHz-928MHz

Brand: RAKwireless

Omnidirectional 902-928 MHz dipole antenna provides 5.8 dBi gain and 360° coverage for LoRaWAN with weatherproof fibreglass housing and N-type connector.

$80.80 AUD, inc GST

915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi

Brand: Sparkfun
A small ¼ wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA connector. Gain is...
$33.60 AUD, inc GST

915MHz LoRa Antenna RP-SMA - 1/2 Wave 2dBi

Brand: Sparkfun
Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and is 200mm long.
$37.05 AUD, inc GST

Omni Outdoor Antenna High Gain Fiberglass Full Wave 915MHz 6dBi RP-SMA (LoRa AU915 & AS923)

High Gain Omni Antenna specifically design for LoRa Gateway applications and a zero compromise setup.
$214.95 AUD, inc GST

SMA to I-PEX Antenna Cable - 120mm

Brand: Seeed Studio
SMA to I-PEX Cable for LoRa Antennas...
$4.90 AUD, inc GST

WisGate Edge Lite 2 (RAK7268V2)- AU915 - Without LTE - Black

Brand: RAKwireless

Multi-channel LoRaWAN gateway with multi-backhaul Ethernet, Wi-Fi and cellular, PoE and LED status monitoring plus remote management for edge IoT networks.

$219.95 AUD, inc GST

u.FL SMT Antenna Connector

Brand: Adafruit
u.FL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. Adafruit use this part...
$1.50 AUD, inc GST

8dBi Fiberglass Antenna - N-Type to RP-SMA - 900-930MHz

IP67-rated outdoor sub-GHz antenna offers 8dBi gain via integrated connector, extending AU915 and AS923 coverage in rural or elevated deployments.

$114.95 AUD, inc GST

2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi

Brand: Adafruit
This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50O impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter...
$19.10 AUD, inc GST

Right-angle Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug

Brand: Adafruit
This 2.2"/57mm long antenna has 2dBi of gain and 50O impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter...
$11.95 AUD, inc GST

Blade Antenna - Black - 902-928MHz

Brand: RAKwireless

High-efficiency omnidirectional indoor LoRa antennas with RP-SMA male connectors deliver reliable 915 MHz coverage for gateways and nodes.

$9.70 AUD, inc GST

Antenna GPS Embedded SMA

Brand: Sparkfun
Embedded antenna for small, mobile applications. Basic unpackaged antenna with LNA. 5inch cable terminated with standard male SMA connector. Match it with any SMA interface cable to create a truly small GPS prototype!
$33.25 AUD, inc GST

SparkFun Antenna - SMA, 2dBi (433MHz)

Brand: Sparkfun
A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi...
$32.95 AUD, inc GST

Antenna Magnetic Base; N Female to RP-SMA male - CFD200-Black-2m

Brand: Seeed Studio
N-type to SMARS Cable to connect LoRa Gateway to Fibreglass antenna and extend the coverage...
$67.40 AUD, inc GST

SMA RF connector (PCB edge mount)

Brand: Sparkfun
PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection...
$2.60 AUD, inc GST

SMA M&M 6GHz Semi-Flexible cable RG402 - 10cm (Seeed Studio)

Brand: Seeed Studio
This SMA male to male is a quality cable able to handle 6GHz with very low attenuation. It is the perfect cable to connect the RF Explorer Signal Generator...
$21.25 AUD, inc GST

Right Angle SMA Thru Hole RF Connector

Brand: Adafruit
This is a great connector for anyone doing RF work, when a right angle SMA connector is required. Solder it into your PCB for a very secure mechanical connection. You've probably seen tons of these on various development boards! The four mechanical connectors also act as the RF ground.
$4.10 AUD, inc GST

RockBLOCK 9704 - SMA

Brand: Sparkfun
The RockBLOCK 9704 by Ground Control is a breakout board for the new Iridium 9704 including a SMA connector and a supercap charger to enable low power...
$539.95 AUD, inc GST

SiK Telemetry Radio V3 - 915MHz, 100mW

Brand: Sparkfun
The 915MHz SiK Telemetry Radio V3 is a lightweight and inexpensive open source radio platform that can allow for ranges of 300m or more out of the box...
$289.95 AUD, inc GST

Edge-Launch SMA Connector for 1.6mm / 0.062 Thick PCBs

Brand: Adafruit
This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a standard 0.063" thick PCB and 'launches' off of the...
$5.05 AUD, inc GST

Edge-Launch SMA Connector for 0.8mm / 0.031 Slim PCBs

Brand: Adafruit
This is a great connector for anyone doing RF work, when an SMA connector is required. It hugs the edge of a "half thickness" 0.031" thick PCB (or thinner!) and...
$4.50 AUD, inc GST

Straight SMA Thru Hole RF Connector

Brand: Adafruit
This is a great connector for anyone doing RF work, when a straight SMA connector is required. Solder it into your PCB for a very secure mechanical connection. You've probably seen tons of these on various development boards! The four mechanical connectors also act as the RF ground.
$3.70 AUD, inc GST

2.4GHz Dipole Swivel Antenna with RP-SMA - 2dBi

Brand: Adafruit
This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50O impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter...
$14.60 AUD, inc GST

Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug

Brand: Adafruit
This 2.4"/61mm long antenna has 2dBi of gain and 50O impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter...
$10.75 AUD, inc GST

868MHz European LoRa Antenna RP-SMA - 1/4 Wave 2dBi

Brand: Sparkfun
This is a small 1/4 wave rubber duck antenna for (European band) LoRa or other 868MHz communication. Antenna has a center frequency of 868MHz and utilizes an RP-SMA...
$16.40 AUD, inc GST

Magnetic Mount SMA - 2m

Brand: Sparkfun
When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view of the sky while you stay in d...
$71.80 AUD, inc GST

SMA-BNC adapter SMA Plug to BNC Jack straight (Seeed Studio)

Brand: Seeed Studio
Most HAM and two-way handheld radio antennas and devices are designed for BNC connectors. This BNC-female to SMA-male connector will easily interface your...
$8.60 AUD, inc GST

LoRa 1W Breakout - 915M30S

Brand: Sparkfun
Do you need power? This breakout for the 915M30S module from EBYTE is a 1W (30dB) LoRa transceiver. LoRa is great for long range (miles), low power (in sle...
$66.55 AUD, inc GST

Interface Cable - N Male to SMA Male (10m)

Brand: FlightAware

Get your ADS-B antenna up on the roof without losing the signal on the way down. Low-loss coax with the right connectors already on both ends.

$134.95 AUD, inc GST

Quad-band Wired Cellular Antenna SMA

Brand: Sparkfun
A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated.
$32.90 AUD, inc GST

SMA M&F 6GHz Semi-Flexible cable RG402 - 10cm (Seeed Studio)

Brand: Seeed Studio
This SMA male to female is a quality cable able to handle 6GHz with very low attenuation. It is the perfect cable to connect the RF Explorer Signal Generator...
$21.20 AUD, inc GST

SparkFun MicroMod LoRa Function Board

Brand: Sparkfun
The SparkFun MicroMod LoRa Function Board provides LoRA and LoRaWAN capabilities to your MicroMod project...
$68.95 AUD, inc GST

MCX Jack to SMA RF Cable Adapter

Brand: Adafruit
This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to an SMA antenna...
$8.70 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.