Search results for: 'rp-sma antenna'

50 results

5.8dBi Fiberglass Antenna - N-Type to RP-SMA - White - 902MHz-928MHz

Omnidirectional 902-928 MHz dipole antenna provides 5.8 dBi gain and 360° coverage for LoRaWAN with weatherproof fibreglass housing and N-type connector.

$80.80 AUD, inc GST

915MHz LoRa Antenna RP-SMA - 1/2 Wave 2dBi

Brand: Sparkfun
Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and is 200mm long.
$37.05 AUD, inc GST

Omni Outdoor Antenna High Gain Fiberglass Full Wave 915MHz 6dBi RP-SMA (LoRa AU915 & AS923)

High Gain Omni Antenna specifically design for LoRa Gateway applications and a zero compromise setup.
$214.95 AUD, inc GST

2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi

Brand: Adafruit
This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50O impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter...
$19.10 AUD, inc GST

8dBi Fiberglass Antenna - N-Type to RP-SMA - 900-930MHz

IP67-rated outdoor sub-GHz antenna offers 8dBi gain via integrated connector, extending AU915 and AS923 coverage in rural or elevated deployments.

$114.95 AUD, inc GST

915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi

Brand: Sparkfun
A small ¼ wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA connector. Gain is...
$33.60 AUD, inc GST

2.4GHz Duck Antenna RP-SMA

Brand: Sparkfun
2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long.
$25.40 AUD, inc GST

Antenna Magnetic Base; N Female to RP-SMA male - CFD200-Black-2m

Brand: Seeed Studio
N-type to SMARS Cable to connect LoRa Gateway to Fibreglass antenna and extend the coverage...
$67.40 AUD, inc GST

Blade Antenna - Black - 902-928MHz

Brand: RAKwireless

High-efficiency omnidirectional indoor LoRa antennas with RP-SMA male connectors deliver reliable 915 MHz coverage for gateways and nodes.

$9.70 AUD, inc GST

2.4GHz Duck Antenna RP-SMA - Large

Brand: Sparkfun
Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance.
$30.90 AUD, inc GST

900MHz Duck Antenna RP-SMA

Brand: Sparkfun
900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long.
$16.30 AUD, inc GST

2.4GHz Dipole Swivel Antenna with RP-SMA - 2dBi

Brand: Adafruit
This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50O impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter...
$14.60 AUD, inc GST

868MHz European LoRa Antenna RP-SMA - 1/4 Wave 2dBi

Brand: Sparkfun
This is a small 1/4 wave rubber duck antenna for (European band) LoRa or other 868MHz communication. Antenna has a center frequency of 868MHz and utilizes an RP-SMA...
$16.40 AUD, inc GST

LoRa Fiberglass Antenna, 860-930MHz, 5dBi, 600mm

Brand: Seeed Studio
Fibreglass LoRa antenna with gain of 8dBi, frequency range 858-878MHz and 130cm length...
$149.95 AUD, inc GST

LoRa Fiberglass Antenna Kit; 902-928MHz-3dBi with Antenna Base

Brand: Seeed Studio
LoRa-Fiberglass Antenna-902-928MHz-3 dBi-360mm-Seeed Studios...
$124.95 AUD, inc GST

SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
$7.80 AUD, inc GST

RP-SMA to U.FL Cable - 150mm

Brand: Sparkfun
This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special...
$5.40 AUD, inc GST

Female RP-SMA to Male SMA RF Adapter

Brand: Adafruit
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately...
$5.40 AUD, inc GST

iPEX to RP-SMA Connector (65mm)

Brand: RAKwireless

Securely link LoRa modules to external antennas with iPEX MHF-1 to RP-SMA/SMA RF coaxial cables for stable signal reception.

$8.50 AUD, inc GST

RP-SMA to w.FL / MHF3 / IPEX3 Adapter

Brand: Adafruit
Most antennas have SMA or RP-SMA connectors on them, how are you going to connect them to your little RF module? This little cable will bridge the...
$5.95 AUD, inc GST

Female SMA to Male RP-SMA RF Adapter

Brand: Adafruit

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. 

$5.75 AUD, inc GST

RP-SMA Male to SMA Female Adapter

Brand: Sparkfun
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.
$4.05 AUD, inc GST

SMA Male to RP-SMA Male Adapter

Brand: Sparkfun
This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration.
$4.35 AUD, inc GST

Interface Cable - RP-SMA Male to RP-SMA Female (1M, RG174)

Brand: Sparkfun
This is a basic RP-SMA male to female connector cable at 1M in length and RG174 housing...
$9.80 AUD, inc GST

RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
$7.40 AUD, inc GST

RP-SMA Connector (PCB edge mount)

Brand: Sparkfun
PCB edge mount Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. This is a standard edge connector. The thickness between pins is 0.063" so that it can slide sideways onto a PCB. See the mechanical drawing to create your footprint.
$5.05 AUD, inc GST

Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)

Brand: Sparkfun
This is a basic RP-SMA male to female connector cable at 25cm in length and RG174 housing...
$6.85 AUD, inc GST

UHF RFID Cable (TNC to RP-SMA)

Brand: Sparkfun
This is a very simple 1m long TNC to RP-SMA cable. We like to use this cable to connect our ultra high-frequency RFID antennas to an equally powerful reader board...
$14.90 AUD, inc GST

Right Angle SMA Thru Hole RF Connector

Brand: Adafruit
This is a great connector for anyone doing RF work, when a right angle SMA connector is required. Solder it into your PCB for a very secure mechanical connection. You've probably seen tons of these on various development boards! The four mechanical connectors also act as the RF ground.
$4.10 AUD, inc GST

Interface Cable - RP-SMA Male to RP-SMA Female (10M, RG58)

Brand: Sparkfun
This is a basic RP-SMA male to female connector cable at 10M in length and RG58 housing...
$44.55 AUD, inc GST

Interface Cable N to RP-SMA Cable - 1m

Brand: Sparkfun
This connector cable interfaces N type female to RP-SMA male. Primarily used to connect our larger 915MHz LoRa antenna to RP-SMA connections but can be used on other...
$15.85 AUD, inc GST

Right Angle RP-SMA Thru Hole RF Connector

Brand: Adafruit
This is a great connector for anyone doing RF work, when a right angle RP-SMA connector is required. Solder it into your PCB for a very secure mechanical connection. You've probably seen tons of these on various development boards! The four mechanical connectors also act as the RF ground.
$3.70 AUD, inc GST

N Female to RP-SMA male connector RF Cable - CFD200 - 3m

Brand: Seeed Studio
N-type to SMARS Cable to connect LoRa Gateway to Fibreglass antenna and extend the coverage...
$16.70 AUD, inc GST
Similar matches

3dBi ADS-B 1090Mhz SMA Antenna w/ Magnetic Base

Brand: The Pi Hut
This neat little 3DBi ADS-B 1090Mhz SMA Antenna with Magnetic Base is designed to receive ADS-B data from aircraft! It features an SMA Male connecter, so...
$14.70 AUD, inc GST

2.6dBi LoRa Antenna - SMA male - 915MHz - 195mm

Brand: Seeed Studio
LoRa Antenna for devices from the E5 series with maximal gain of 2.6dBi and frequency of 902-928MHz...
$8.55 AUD, inc GST

GPS/GNSS Magnetic Mount Antenna SMA - 3m

Brand: Sparkfun
Normal GPS antennas are optimized for the US based GPS reception which is great but with more and more modules capable of tracking additional constellations (termed...
$29.25 AUD, inc GST

GPS Antenna - External Active Antenna - 3-5V 28dB 5 Meter SMA

Brand: Adafruit
Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a...
$44.45 AUD, inc GST

GNSS Multi-Band Magnetic Mount Antenna - 5m (SMA)

Brand: Sparkfun
The ANN-MB-00 GNSS multiband antenna is extremely unique from other GNSS/GPS antennas in that it is designed to receive both the classic L1 GPS band and the newly...
$219.95 AUD, inc GST

LTE Antenna 175mm Duck SMA Male - VT4GLTE-R-10

Brand: Sparkfun
This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands.
$21.55 AUD, inc GST

SparkFun Antenna - SMA, 2dBi (433MHz)

Brand: Sparkfun
A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi...
$32.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.