Search results for: 'rgb led modules'

40 results

Gravity: Digital RGB LED Module

Brand: DFRobot
Gravity: Digital RGB LED Module is a cascadable single RGB LED module compatible with RGB LED strip. The Gravity interface provides a more elegant manner for the...
$3.25 AUD, inc GST

PiicoDev 3x RGB LED Module

Brand: PiicoDev
Add dazzle to your project with three individually controllable RGB LEDs.
$6.50 AUD, inc GST

Addressable LED Ring - 24 Bit WS2812 RGB LED

Brand: Core Electronics
This is small circular ring of addressable RGB LEDs (24 total). Great for many maker projects.
$3.30 AUD, inc GST

Gravity: I2C RGB LED Colorful Button Module

Brand: DFRobot
This I2C button module with RGB LED not only supports reading button status like conventional ones, but also controlling RGB LED color and switching...
$16.70 AUD, inc GST

Raspberry Pi RGB-LED-Matrix Expansion Module (Seeed Studio)

Brand: Seeed Studio
The Matrix LED module is specifically designed for Raspberry Pi B/B+/A+. The module with 8X8 Matrix LED. User can custom display content through programming...
$61.90 AUD, inc GST

NeoPixel Nano 2020 RGB LEDs - 10-pack - WS2812B

Brand: Adafruit
These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They are just mind-bogglingly small - 2mm square. As they are pretty darn tiny, they might be a bit difficult to hand solder. SMT techniques with solder paste and hot air will work best here.
$7.95 AUD, inc GST

LED Strip Module for Yukon

Brand: Pimoroni
Drive WS2812/Neopixel and APA102/Dotstar addressable RGB LED strips from your Pimoroni Yukon project with this 5V / 5A regulator with level-shifting...
$25.25 AUD, inc GST

Light Disc with 7 SMD RGB LED

Brand: DFRobot
This fantastic light disc consists of 7 SMD RGB LED. It illustrates a beautiful color combination much better than traditional RGB led.
$5.65 AUD, inc GST

littleBits RGB Led

Brand: LittleBits
The RGB LED (or "Red-Green-Blue Light-Emitting Diode") Bit is a special light whose color you can adjust. Use the included screwdriver to adjust each of the color channels to get almost any color. Use the RGB LED when you want to match the light to the color of your creation!
$21.99 AUD, inc GST $22.95

64x32 RGB LED Matrix Panel (4mm pitch)

Brand: DFRobot
This is a 64x32 RGB LED Matrix Panel, it has 2048 full-color RGB LEDs in all. Each LED can be independently controlled. To control this LED Matrix, at least 13 digital...
$81.85 AUD, inc GST

BlinkM - I2C Controlled RGB LED

Brand: Sparkfun
BlinkM is a “Smart LED”, a networkable and programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lighting to existing or new projects. If you’ve used up all your microcontroller PWM channels controlling RGB LEDs and still want more, BlinkM is for you. BlinkM uses a high quality, high power RGB LED and a small AVR microcontroller to allow a user to digitally control an RGB LED over a simple I2C interface. Multiple BlinkMs can be stranded together on an I2C bus allowing for some amazing light displays.
$44.40 AUD, inc GST

RGB LCD Backlight Module

Brand: DFRobot
DFRobot has a Gravity I2C LCD1602 RGB Backlight Screen which backlight can be modulated to the different backlight colors and the display effect is very brilliant...
$2.50 AUD, inc GST

LED - RGB Clear Common Anode

Brand: Sparkfun
Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors!
$4.95 AUD, inc GST

10W Super Bright LED - RGB

Brand: DFRobot
This 10W super bright LED can be used as a flash searchlight for your robot projects. It consists of 9 separate LEDs and has a luminance of 500LM. Comes in various colors.
$18.05 AUD, inc GST

8x8 RGB LED Matrix

Brand: DFRobot
The 8x8 RGB LED Matrix! This module is a square panel with a XH2.54 3-pin interface. This 8x8 RGB full-color LED matrix module is based on WS2812 intelligent control...
$41.90 AUD, inc GST

93 LEDs WS2812B RGB 6 Ring Lamp

Brand: DFRobot
This WS2812B ring lamp is composed of 93 lamp beads in 6 circles, and each circles can be controlled separately. You can design the size and shape of the lamp as...
$35.95 AUD, inc GST

Monk Makes RGB LED for micro:bit

Brand: Monk Makes
The Monk Makes RGB LED for micro:bit provides a colorful add-on to your micro:bit. Connect it up with alligator clips and then use the three outputs of your micro:bit to control the red, green and blue channels to mix up any color of light you want.
$6.90 AUD, inc GST

Flexible RGB LCD Backlight Module

Brand: DFRobot
Embed this flexible RGB backlight module into any custom project. This bendable light panel provides uniform, high-brightness output in 16 million colors....
$3.50 AUD, inc GST

Grove Zero Starter Kit

Brand: Seeed Studio
This kit includes 9 Grove zero modules and is designed for kids who are beginners to graphical programming and robotics. Among these modules, the light sensor, sound sensor and twin-button module are what we call input modules; while the buzzer, RGB LED, LED matrix and servo are categorized as output modules. By connecting one or more modules to the included mainboard and battery module, you can implement a lot of your exciting and fun projects!
$234.95 AUD, inc GST

Adafruit NeoRGB Stemma - NeoPixel to RGB PWM LEDs and Strips - STEMMA JST PH 2mm

Brand: Adafruit
Whenever we're working with 'true analog' LED strips, that have 1-3 channels of RGB or White LEDs, we wish we had already invented to make...
$8.90 AUD, inc GST

littleBits Steam Student Set

Brand: LittleBits
The Littlebits Steam Student Kit is here to provide the most engaging classroom experience possible. It contains modules of every kind which are sure to capture the imaginations of minds everywhere.
$586.99 AUD, inc GST $599.00

I2C RGB Backlight LCD 16x2 Display Module for Arduino (Black Text)

Brand: DFRobot
This product includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons.
$23.50 AUD, inc GST

BitGadget Kit - Grove Creator Kit for Micro:bit

Brand: Seeed Studio

The BitGadget Kit includes a BitMaker and 9 different Grove modules. This is the most suitable kit for micro:bit intermediate learners to dive deep into the world of micro:bit. An example of a project you could create is your own customized mood lighting with the RGB LED strip which automatically senses when it needs to come on through a light sensor or adjust it manually with a sliding potentiometer and push button in the kit. 

$124.95 AUD, inc GST

ESP32-C3 RISC V Developer Board - 4 MB SPI Flash - DevKitC-02 ESP32-C3-WROOM-02

Brand: Adafruit
The ESP32-C3-DevKitC-02 is an entry-level RISC V development board equipped with the ESP32-C3-WROOM-02, a powerful, generic Wi-Fi + Bluetooth LE MCU...
$23.30 AUD, inc GST

Edu:bit Training & Project Kit for micro:bit (without micro:bit)

Brand: Kitronik
This beginner-friendly micro:bit kit is specially designed to encourage kids to explore STEAM/STEM and to learn to code. You can easily program EDU:BIT using the Microsoft MakeCode Editor. Just add te EDU:BIT MakeCode Extension and you’re good to go. If you’re a beginner, you can start with the block programming mode; simply drag, drop and snap the coding blocks together. For more advanced users, you can easily switch into JavaScript or Python mode on the MakeCode Editor.
$159.95 AUD, inc GST

ESP32-C6-DevKitC-1-N8 Development Board (8 MB SPI Flash)

Brand: DFRobot
The ESP32-C6-DevKitC-1 development board is a powerful IoT development board that integrates Wi-Fi, Bluetooth LE, Zigbee, and Thread functions, making it...
$23.25 AUD, inc GST

MXChip Microsoft Azure IoT Developer Kit

Brand: DFRobot

In order to provide a convenient, high quality and out-of-the-box solution equipped with the latest Microsoft cloud services to Arduino developers and IoT practitioners, we have developed this finished product which is integrated with the most commonly used sensors has is also capable of sensing further interfaces.

$69.10 AUD, inc GST

GlowBit™ Stick - 1x8

Brand: GlowBit
Add eight dazzling LEDs to your project or daisy chain for a longer display.
$2.95 AUD, inc GST

Xia mi Multi-functional Expansion Board for BBC micro:bit V2

Brand: DFRobot
This is a micro:bit V2-based multi-functional expansion board for programming education. Featuring a small size of 57*87mm and a compact layout, the board ...
$57.30 AUD, inc GST

ESP32-S3-DevKitM-1-N8 - ESP32-S3-MINI-1 Dev Board - 8 MB Flash

Brand: Adafruit
The ESP32-S3-DevKitM-1 is an entry-level development board equipped with the ESP32-S3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module...
$36.95 AUD, inc GST

Maker Pi Pico Mini - Without Raspberry Pi Pico / Pico W (Pre-Soldered Pin Header)

Brand: Pimoroni
Simplifying Projects with Raspberry Pi Pico Small but Mighty Love the Maker Pi Pico but can't fit it into your project? Now we have the Maker Pi Pico...
$24.40 AUD, inc GST

Maker Nano RP2040

Brand: Pimoroni
Simplifying Projects with Raspberry Pi RP2040 Looking for a small but powerful MCU for your project? Arduino Nano can't satisfy you anymore? We have the...
$25.70 AUD, inc GST

ESP32-C6-DevKitC-1-N8 - 8MB SPI Flash

Brand: Adafruit
The ESP32-C6-DevKitC-1-N8 is an entry-level development board equipped with ESP32-C6-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE RISC-V MCU module...
$27.05 AUD, inc GST

ESP32-S2-DevKitM-1 Development Board

Brand: DFRobot
ESP32-S2-DevKitM-1 is an entry-level development board equipped with ESP32-S2-MINI-1 module. Most of the I/O pins on the module are broken out to the pin headers...
$33.50 AUD, inc GST

ESP32-S3-DevKitC-1-N8R8 - ESP32-S3-WROOM-1 - 8MB Flash 8MB PSRAM

Brand: Adafruit
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that...
$45.20 AUD, inc GST

FireBeetle Board ESP32-E (Arduino Compatible)

Brand: DFRobot
FireBeetle ESP32-E, specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Bluetooth dual-mode communication...
$18.80 AUD, inc GST

ESP32-C3 Mini Dev Board (With Headers)

Brand: Waveshare
Explore the capabilities of the ESP32-C3 Mini Dev Board, a powerhouse with a RISC-V processor, Wi-Fi & BT5 connectivity, and SMD compatibility. Ideal for IoT projects, this compact board offers a 160MHz frequency, multi-function GPIOs, and low-power operation for innovative makers and professionals.
$7.60 AUD, inc GST

Pimoroni Pico Display Pack

Brand: Pimoroni
A vibrant 1.14" IPS LCD screen for your Raspberry Pi Pico, with four useful buttons and a RGB LED!
$29.80 AUD, inc GST

Study Pack of HUSKYLENS for micro:bit

Brand: DFRobot
The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered...
$92.65 AUD, inc GST

Basic 16x2 Character LCD - RGB Backlight 5V

Brand: Sparkfun
This is similar to other 16x2 character LCDs that you’ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three backlight levels. It also utilizes an extremely common parallel interface so code is freely available (check below for an Arduino example). You will need ~11 general I/O pins to interface to this LCD screen, plus an extra 3 pins for the RGB backlight.
$37.75 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.