Search results for: 'nut driver'

This nut driver is super handy to have when building with M4 hardware. It has a long end and a short end; both 7mm hex. The long end...

The Moray is the perfect every-day-carry toolkit or junk drawer standby to prevent your stuff from becoming junk...

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification and prevent your goodies from...

The Mako Driver Kit includes iFixit's 4mm aluminum screwdriver handle with magnetic bit socket, knurled grip, and swivel top plus 64 precision driver bits...

Having a broken phone or electronics device stinks, whether it's a screen going out, a cable becoming unplugged, or even a more severe issue that will cost you more...

The all-in-one 28BYJ-48 stepper motor module with an integrated driver. Its plug-and-play 4-pin interface is perfect for Arduino classroom projects...

This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as Adafruit's micro servo but it isn't a servo. It's more like a DC motor...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 18 cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).

Explore the physical world with MiniQ robot! This is a MinQ 2WD Plus which is based on our MiniQ 2WD Chasis. To make it suitable for educational, competions and fun to play with, we also added extra modules such as Romeo V2 All-in-onecontroller, Sharp GP2Y0A21 Distance Sensor and 9g micro servo into this kit. What makes it different from the original miniQ robots is that it comes with an upper deck, which allow you to install sensors, servos and even do some prototypings. The leaf pads on the surface make it an ideal on-the-go prototyping board, and it is stackable. You can not only solder DIP components but also solder SMD components with this upper deck. Whatsmore, we have soldered motor wires and glued for you in advance. With this kit you'll be able to play immediately after simple assembling and programming. Our sample codes include many interesting senarios such as obstacle avoidance, enjoy!

Looking for another way to keep your project cool? Hook up this 5V Mini Cooling Fan and prevent from overheating! Of course, it's also great for use with any small...

This is the control board for the Balboa 32U4 robot. It is included as part of the Balboa 32U4 Balancing Robot Kit and can be added to the Balboa Chassis with Stability Conversion Kit to turn into a Balboa 32U4 robot.

Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also...

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification and prevent your goodies from...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification and prevent your goodies from...

This NEMA 17-size hybrid bipolar stepping motor has an integrated 38 cm (15") threaded rod as its output shaft, turning it into a linear actuator capable...

Looking for another way to keep your Raspberry Pi cool? Hook up this 5V Mini Cooling Fan and prevent your hard-working Pi from overheating! Of course, it's also great for use with any small computer or FPGA or motor driver or anything that needs cooling.

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification and prevent your goodies from...

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification and prevent your goodies from...

This kit brings the excellent design and tutorials of Parallax to the Arduino world. Make your Arduino the onboard brain of a mobile robot and learn robotics, electronics...

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification and prevent your goodies from...

Looking for another way to keep your project cool? These plug-and-play USB-ready 5V Fans provide instant gratification, and prevent your goodies from...

This board is designed to be a thin, bluetooth-enabled driver board for our Adafruit LED Glasses RGB LED matrix. That said, it's a perfectly good...

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.3×0.8-inch board supports a wide 5.5 to 30 V voltage range and is efficient enough to deliver a continuous 15 A without a heat sink.

This compact breakout board for Toshiba’s TB67H453FTG motor driver offers a wide operating voltage range of 4.5 V to 44 V and can deliver a continuous...

Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! Please see datasheet for more information. This is a pin to pin compatible replacement for the L293D.

You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise...

Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful for a wide variety...

A wild Kee Boar appears! It’s a shiny KB2040! An Arduino Pro Micro-shaped board for Keebs with RP2040. (#keeblife 4 evah) A lot of folks like using...

Looking for a high-current motor driver for your Raspberry Pi? How does dual 10A channels sound?! Cytron's latest motor driver is designed for the...

Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's...

This breakout board for STMicro’s STSPIN220 low-voltage microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates...

This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 V to 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors.

The SparkFun Mini Stepper Motor Driver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba!...

This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver has a pinout and interface that are very similar to that of our popular...

This tiny breakout board for TI’s DRV8801 provides a modern alternative to classic motor drivers such as the L293D, SN754410, and L298N. It can deliver a continuous 1 A (2.8 A peak) to a single motor and offers a wide operating voltage range of 8 V to 36 V. The DRV8801 features a simple two-pin speed/direction interface, current-sense feedback, and built-in protection against under-voltage, over-current, and over-temperature.

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The compact 1.8×1.2-inch board supports a wide 5.5 to 50 V voltage range and is efficient enough to deliver a continuous 20 A without a heat sink. This version outputs an analog voltage proportional to the motor current, and an extra control input allows for coasting in addition to the driving and braking offered by the other Pololu high-power motor drivers.

This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its two integrated...

This breakout board for Freescale’s MC33926 full H-bridge has an operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to a DC motor. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.