Search results for: &#039;micro sd card breakout board&#039;

MicroSD card breakout board+

Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards...

$13.20 AUD, inc GST

This simple board breaks out the pins of a microSD card connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

Breakout Board for microSD Card

Brand: Pololu

$8.30 AUD, inc GST

MicroSD Card Module for Arduino

Brand: DFRobot

This is a Micro SD card module from DFRobot. The SD Card Module has various applications such as data logging, audio, video, graphics. This module will greatly expand the capbility of an Arduino!

$8.70 AUD, inc GST

SparkFun Level Shifting microSD Breakout

The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system. With this small breakout board, that is not much bigger than your fingernail, adding mass storage to your project will never be easier.

$10.85 AUD, inc GST

Breakout Board for microSD Transflash

Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.

$9.90 AUD, inc GST

This compact board breaks out the pins of a microSD card connector necessary to interface with the card through SPI (Serial Peripheral Interface), and it...

Breakout Board for microSD Card with 3.3V Regulator and Level Shifters

Brand: Pololu

$12.60 AUD, inc GST

Add an SD slot and prototyping area in a single shield

Arduino SD Proto Shield

Brand: Arduino

$33.70 AUD, inc GST

MicroSD Memory Card - 16GB Class 10

Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card

$20.20 AUD, inc GST

Official Raspberry Pi 64GB A2-Class micro SD card

Brand: Raspberry Pi

Reliable, fast, and tested storage, ready to go for your Raspberry Pi projects!

$47.50 AUD, inc GST

Reliable, fast, and tested storage, ready to go for your Raspberry Pi projects!

Official Raspberry Pi 128GB A2-Class micro SD card

Brand: Raspberry Pi

$64.00 AUD, inc GST

Converts a uSD (microSD) Card into a full sized SD Card.

SanDisk uSD to SD Adapter

$1.85 AUD, inc GST

Round Panel Mount Micro SD Card Extender

If you need to add a panel-mount connection that extends a micro SD card, this Round Panel Mount MicroSD Adapter Plug is the easiest and fastest way to...

$18.65 AUD, inc GST

USB-C Breakout Board (SMD)

Experiment and implement USB-PD or high-speed USB with this versatile breakout.

$1.60 AUD, inc GST

Micro SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with a Micro SD Card Extender . This simple, but effective device...

$13.90 AUD, inc GST

Extreme SD/MicroSD Memory Card - 256GB Class 10 - Adapter Included

Capture up to 4K UHD media on this extremely durable and fast SD/MicroSD card at speeds up to 160MB/s. The perfect card for extended use with drones, cameras or phones.

$199.95 AUD, inc GST

This simple board breaks out all five pins of a USB Mini-B connector to a 0.1″ pin spacing that is compatible with standard perfboards, solderless breadboards, and 0.1" connectors.

USB Mini-B Connector Breakout Board

Brand: Pololu

$4.15 AUD, inc GST

Adafruit microSD Card BFF Add-On for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of...

$5.50 AUD, inc GST

3.2 TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is really big (3.2" diagonal) bright (6 white-LED backlight) and colorful!...

$68.20 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 512 MB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format. What that means is that you wire up like an SD card breakout, and use the SD card libraries you already have for your microcontroller. For example, you can use the built in SD library in Arduino, or for CircuitPython Adafruit have an sdcard library. The breakout will act just like a 512 MB sized card with FAT formatting (it's pre-formatted).

$17.40 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 4 GB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format....

$24.15 AUD, inc GST

1.8 Color TFT LCD display with MicroSD Card Breakout - ST7735R

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate...

$40.45 AUD, inc GST

LibreELEC Preloaded 16GB microSD Card for Raspberry Pi 4

This 16GB microSD card is preloaded with LibreELEC and the Argon scripts for a Raspberry Pi 4

$19.95 AUD, inc GST

This microSD card is preloaded with RetroPie and is part of our RetroPie Gaming Kits

RetroPie Preloaded 16GB microSD Card for Raspberry Pi 4

Brand: RetroPie

$53.10 AUD, inc GST

Adafruit SPI FLASH Breakout - W25Q16 - 16 Mbit / 2 MByte

Sometimes you need a little extra storage for your microcontroller projects: for files, images, fonts, audio clips, etc. If you need lots of space, like...

$5.35 AUD, inc GST

Adafruit 1.44 Color TFT LCD Display with MicroSD Card breakout - ST7735R

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate...

$29.95 AUD, inc GST

White Shortening microSD to SD Card Adapter

This short-style white microSD adapter slides in where the SD card goes but is 11mm shorter (excluding the silver lip). This makes it stick out a lot less...

$3.50 AUD, inc GST

MicroSD Socket

Add tons of storage to your next project with this micro SD card socket. Adafruit use this part in all Adafruit's designs and it works great with any microSD ('transflash') of...

$3.45 AUD, inc GST

SD to MicroSD Extender - 23cm (9 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender. This simple, but effective device...

$13.55 AUD, inc GST

4 Pack MicroSD Exteneders

Brand: Arducam

Extend your uSD slot on your Raspberry Pi or 3D printer.

$25.10 AUD, inc GST

Adafruit SPI Flash SD Card - XTSD 2 GB

This breakout is for a fascinating chip - it looks like an SPI Flash storage chip (like the GD25Q16) but its really an SD card, in an SMT chip format....

$18.90 AUD, inc GST

2.8 TFT LCD with Cap Touch Breakout Board w/MicroSD Socket

Add some jazz & pizazz to your project with a color capactive touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful!...

$62.40 AUD, inc GST

USB MicroB Plug Breakout Board

We have no idea what USB device you are hooking up to, but if you want to access the microUSB port on something, you might want this. We broke out all 5 pins with a vertical microUSB connector for your prototyping needs.

$9.70 AUD, inc GST

Arduino Portenta Breakout board is designed to help hardware engineers and makers to prototype and help test devices connections and capacity within the Portenta family boards (e.g. the Portenta H7). It makes all high-density connectors’ signals individually accessible, making it quick and easy to connect and test external hardware components and devices as normally needed during development in the lab.

Arduino Portenta Breakout

Brand: Arduino

$93.95 AUD, inc GST

USB Mini-B Breakout Board

Simple but effective - this breakout board has a USB Mini-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or...

$3.65 AUD, inc GST

SD Card Extender - 68cm (26 inch) long cable

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender . This simple, but effective device gives...

$15.10 AUD, inc GST

This display module features high resolution, low power consumption, wide-angle and easy wiring. With a small size of 1.54”, it offers 240x240 resolution. The module...

1.54 240x240 IPS TFT LCD Display with MicroSD Card Breakout

Brand: DFRobot

$26.20 AUD, inc GST

microSD Sniffer

When playing with microSD, you sometimes need to view what the SPI traffic is doing, whether for hacking or debugging. The microSD Sniffer allows you to hook up an external device, such as a logic analyzer or microcontroller, to view what signals are being passed back and forth. Insert one side into a regular uSD socket and a uSD card into the on-board socket, simple as that.

$22.95 AUD, inc GST