Search results for: 'memory display'

ESP32-S3 7inch Capacitive Touch Display Development Board, ESP32 With Display, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor, Up to 240MHz...

ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor...

ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor, Round Display, With CNC Metal Case...

These modules can be mounted flush side-by-side to extend them far beyond the 8x8 matrix. For example, you could have a 8x32 matrix! At the core is a MAX7219 - a very well documented chip in the Arduino community (along with ever other flavour of micro controller).

ESP32-S3 2inch Display Development Board, 240×320 Pixels, IPS Panel, 262K color, 32-bit LX7 Dual-core Processor, Up To 240MHz Frequency, Supports WiFi &...

ESP32-S3 Development Board, 32-bit LX7 Dual-core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch IPS Round LCD, 240×240 Resolution,...

Standard HD44780 LCDs are useful for creating standalone projects. 20 characters wide, 4 rows White text on blue background Connection port is 0.1" pitch, single...

Integrated with the ESP32-D0WD, this 540*960 4.7" E-ink display comes with 16MB Flash and 8MB PSRAM, which can work well with other touch screens. It supports 16...

Your basic 7-segment LED. Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6". Overall height is 1"

RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor...

E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...

I like big seven-segment displays and I cannot lie! Design a clock, timer or counter into your next project using Adafruit's pretty, candy-bar sized 4-digit seven-segment...

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate...

RP2350 1.43inch AMOLED Display Development Board, 466×466, SPI Interface Round Display, Onboard Accelerometer And Gyroscope Sensor, RTC Chip, Optional For...

Design a clock, timer or counter into your next project using Adafruit's pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output...

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a quad-color eInk display. Chances are...

Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one...

The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into...

Monitor the air you breathe with the Kitronik Air Quality Board. Great for home and classroom. It provides a complete air monitoring solution for BBC...

EdgeLogix-RPI-1000-CM4104032 Raspberry Pi-based industrial controller offers you the greatest performance when it comes to the novel automation essentials...

Explore the M5Stack AirQ Environmental Monitor Kit, a comprehensive IoT device that measures PM2.5, CO2, VOC, temperature, and humidity with an e-ink display and cloud connectivity for real-time air quality monitoring.

For a long time we’ve had small 7-segment displays and huge 7-segment displays, but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you’d have trouble finding an enclosure for them.

For a long time we’ve had small 7-segment displays and huge 7-segment displays, but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you’d have trouble finding an enclosure for them.

This is similar to other 16x2 character LCDs that you’ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three backlight levels. It also utilizes an extremely common parallel interface so code is freely available (check below for an Arduino example). You will need ~11 general I/O pins to interface to this LCD screen, plus an extra 3 pins for the RGB backlight.

This is a basic 16 character by two line display with a snazzy black background with white characters. This LCD utilizes the extremely common HD44780 parallel interface...

This is not your basic 7-segment display. The Dual 7-Segment Display features two digits with an RGB LED in every single segment! You will now have a small 7-segment...

If you've been diggin' Adafruit's monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the...

The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded...

E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white...

E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...

What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like...