Search results for: 'sharp memory lcd'
Adafruit SHARP Memory Display Breakout - 2.7 400x240 Monochrome
Brand: Adafruit
The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD.
$77.60 AUD, inc GST
Adafruit SHARP Memory Display Breakout - 1.3 168x144 Monochrome
Brand: Adafruit
The 1.3" 168x144 SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh...
$51.65 AUD, inc GST
Similar matches
Large OLED I2C Display (SSD1309)
Brand: Core Electronics
Bright, crisp, and easy to use, this 2.42-inch OLED is perfect for projects that need to display anything!
$21.70 AUD, inc GST
White I2C 16x02 LCD Display (White on Blue, 3/5V)
Brand: Waveshare
LCD1602 I2C Module, White color with blue background, 16x2 characters LCD, 3.3V/5V...
$12.25 AUD, inc GST
Dual Colour OLED Display (128x64, Yellow and Blue)
Brand: Core Electronics
Add a split colour display to your project, perfect for menu's and displaying data.
$7.11 AUD, inc GST
Monochrome 0.91”128x32 I2C OLED Display
Brand: DFRobot
This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...
$16.14 AUD, inc GST
1.83inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS LCD, 65K Colors, Rounded Corners, Micro LCD Display
Brand: Waveshare
1.83inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS LCD, 65K Colors, Rounded Corners, Micro LCD Display...
$15.70 AUD, inc GST
1.8inch RGB LCD display (128x160 pixels)
Brand: Waveshare
1.8inch diagonal, 128x160 pixels, with embedded controller, communicating via SPI interface.
$15.05 AUD, inc GST
Monochrome 0.91”128x32 I2C OLED Display with Chip Pad
Brand: DFRobot
This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...
$16.13 AUD, inc GST
0.96"160x80 Color SPI TFT Display
Brand: DFRobot
This 0.96”TFT display employs edge-to-edge design and offers glorious 160×80HD 16-bit color display, which can be suitable for wearable projects, mobile...
$14.06 AUD, inc GST
Pico Display Pack 2.8"
Brand: Pimoroni
An expanded 2.8" (320 x 240 pixel) IPS LCD display add on for Raspberry Pi Pico / Pico W, with four buttons, an RGB LED and Qw/ST connectivity...
$50.10 AUD, inc GST
4.2" 300x400 Monochrome or 4-Gray eInk / ePaper - Bare Display - SSD1683
Brand: Adafruit
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...
$43.95 AUD, inc GST
RGB backlight positive LCD 20x4 + extras - black on RGB
Brand: Adafruit
This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has black characters on a full color RGB background! That means you can change the display background color to anything you want - red, green, blue, pink, white, purple yellow, teal, salmon, chartreuse. This LCD looks strikingly good in person. This LCD is the most daylight readable character LCD Adafruit have and is very beautiful and easy to read no matter what color/brightness you have for the backlight.
$49.80 AUD, inc GST
Pimoroni 1.3" SPI Colour LCD (240x240) Breakout
Brand: Pimoroni
Crisp, high-res, with great viewing angles (IPS), this 1.3" square, 240x240 pixel, colour LCD will add some pizzazz to your Raspberry Pi or Arduino projects.
$33.95 AUD, inc GST
Grove - OLED Display 0.66" (SSD1306)- IIC - 3.3V/5V
Brand: Seeed Studio
The Grove - OLED Display 0.66" (SSD1306) is a monochrome display with 64×48 resolution. It contains a user-friendly design and outstanding performance with Grove I2C interface in 20mm×20mm ultra-small size.
$10.75 AUD, inc GST
Monochrome 2.7 128x64 OLED Graphic Display Module Kit
Brand: Adafruit
If you've been diggin' Adafruit's monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the...
$96.70 AUD, inc GST
4.2" 300x400 Tri-Color eInk / ePaper - Bare Display - SSD1683
Brand: Adafruit
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...
$43.95 AUD, inc GST
1.54" 152x152 Tri-Color eInk / ePaper Display - SSD1681
Brand: Adafruit
This is a screen for advanced hackers who like the look of the tri-color e-ink display we put into the 1.54" Tri-Color eInk / ePaper Display and the...
$10.95 AUD, inc GST
2.66" 296x152 Tri-Color Red / Black / White EInk - Bare Display - SSD1680Z Chipset
Brand: Adafruit
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...
$24.90 AUD, inc GST
Basic 16x2 Character LCD - RGB Backlight 5V
Brand: Sparkfun
This is similar to other 16x2 character LCDs that you’ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three backlight levels. It also utilizes an extremely common parallel interface so code is freely available (check below for an Arduino example). You will need ~11 general I/O pins to interface to this LCD screen, plus an extra 3 pins for the RGB backlight.
$37.75 AUD, inc GST
Monochrome 2.42 128x64 OLED Graphic Display Module Kit
Brand: Adafruit
If you've been diggin' Adafruit's monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to...
$69.40 AUD, inc GST
Adafruit 1.54 Tri-Color eInk / ePaper 200x200 Display with SRAM - SSD1681 Driver
Brand: Adafruit
Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!
$34.90 AUD, inc GST
Graphical OLED Display: 128x64, 1.3", White, SPI
Brand: Pololu
This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3" diagonally, ...
$23.55 AUD, inc GST
2.66" 296x152 Monochrome or Gray eInk / ePaper - Bare Display - SSD1680
Brand: Adafruit
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...
$24.95 AUD, inc GST
Pimoroni 0.96" SPI Colour LCD (160x80) Breakout
Brand: Pimoroni
A handy lil' LCD to add readouts to your projects. This 0.96" SPI LCD has a 2:1 widescreen aspect ratio, has great viewing angles (IPS), and works with Raspberry Pi or Arduino.
$40.20 AUD, inc GST
Adafruit 2.13 Tri-Color eInk / ePaper Display with SRAM - Red Black White
Brand: Adafruit
Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one...
$39.35 AUD, inc GST
7.5" 800x480 Monochrome eInk / ePaper - Bare Display - UC8197 Chipset
Brand: Adafruit
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...
$114.95 AUD, inc GST
1.8 SPI TFT display, 160x128 18-bit color - ST7735R driver
Brand: Adafruit
We just love this little 1.8" TFT display, with true TFT color (up to 18-bits per pixel!), fine 160x128 resolution, two white LED backlight that runs on 3.3V and...
$17.70 AUD, inc GST
Adafruit 2.13 250x122 Tri-Color eInk / ePaper Display with SRAM - SSD1680 Driver
Brand: Adafruit
Easy e-paper finally comes to microcontrollers, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!
$35.35 AUD, inc GST
3.7" 416x240 Monochrome Black/White eInk / ePaper - Bare Display - UC8253 Chipset
Brand: Adafruit
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...
$41.40 AUD, inc GST
Pimoroni 1.54" SPI Colour Square LCD (240x240) Breakout
Brand: Pimoroni
Add a bright, hi-res, square LCD screen to your Raspberry Pi (or Pico) projects with this 1.54" Breakout Garden-compatible SPI display.
$40.75 AUD, inc GST
IIC LCD1602 (Gadgeteer Compatible)
Brand: DFRobot
This is another great LCD display compatible with Gadgeteer modules from DFRobot. With limited pin resources, your project will quicly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.If you already have I2C devices in your project, this LCD module actually cost no more resources at all. The address can be set from 0x20-0x27.Fantastic for Arduino or gadgeteer based projects.
$18.83 AUD, inc GST
3.7" 416x240 Tri-Color Red / Black / White eInk - Bare Display - UC8253 Chipset
Brand: Adafruit
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY...
$42.80 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.