Search results for: 'makerverse load cell amplifier'

32 results

Makerverse Load Cell Amplifier

Brand: Makerverse

Reads weight or force from a load cell with 18-bit precision

$4.35 AUD, inc GST

SparkFun Load Cell Amplifier - HX711

Brand: SparkFun
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.
$19.05 AUD, inc GST

Makerverse Load Cell Kit

Brand: Makerverse

The easiest way to begin measuring force and weight - Assemble and program your own scales with this practical kit.

$26.65 AUD, inc GST

M5Stack Mini Weight Unit (HX711) Load Cell Amplifier

Brand: M5Stack

The M5Stack Mini Weight Unit Load Cell Amplifier integrates an HX711, 24-bit A/D chip that is specifically designed for an electronic weighing device.

 

 

$7.55 AUD, inc GST

Mini Load Cell - 100g, Straight Bar (TAL221)

Brand: SparkFun
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is...
$29.50 AUD, inc GST

SparkFun Load Sensor Combinator (Ver. 1.1)

Brand: SparkFun
The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s nest of wires. The Load Sensor Combinator was created to combine the 12 wires found in a bathroom scale into the standard four-wire Wheatstone bridge configuration.
$4.75 AUD, inc GST

Mini Load Cell - 500g, Straight Bar (TAL221)

Brand: SparkFun
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 500g of pressure (force) into an electrical signal. Each load cell is...
$31.95 AUD, inc GST

Op-Amp - LM258P (Through-Hole)

Brand: SparkFun
The LM258P is a great, easy-to-use dual-channel Op-amp. Op-amps have so many applications we figured we should probably carry at least one in a DIP...
$0.47 AUD, inc GST

Load Cell - 200kg, S-Type (TAS501)

Brand: SparkFun
This S-Type load cell (sometimes called a strain gauge) can translate up to 200kg of pressure (force) into an electrical signal. Each load cell is able to measure...
$179.95 AUD, inc GST

OpAmp Breakout

Brand: SparkFun
This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.
$12.05 AUD, inc GST

Weight Sensor (Load Cell) 0-50kg (Seeed Studio)

Brand: Seeed Studio

Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance...

$37.75 AUD, inc GST

Load Cell - 10kg, Straight Bar with Hook (HX711)

Brand: SparkFun
This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal...
$43.45 AUD, inc GST

Load Cell - 200kg, Disc (TAS606)

Brand: SparkFun
This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
$189.95 AUD, inc GST

SparkFun Configurable OpAmp Board - TSH82

Brand: SparkFun
The SparkFun TSH82 Configurable OpAmp Board was designed to give you the best combination of performance and flexibility that we could achieve by giving you two...
$13.20 AUD, inc GST

Weight Sensor (Load Cell) 0-500g (Seeed Studio)

Brand: Seeed Studio
Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties...
$35.05 AUD, inc GST

Load Cell - 50kg, Disc (TAS606)

Brand: SparkFun
This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
$189.95 AUD, inc GST
Similar matches

1kg Beam Load Cell

Brand: Core Electronics
A 1kg bar load cell, perfect for weighing very light objects!
$4.90 AUD, inc GST

Makerverse Protoboard 63 Row

Brand: Makerverse
A high-quality solderable breadboard with an extra pad per row for wide modules
$3.70 AUD, inc GST

Makerverse M3 Mounting Kit

Brand: Core Electronics
Mount your project onto support material up to 3mm thick.
$3.20 AUD, inc GST

Makerverse Protoboard for Raspberry Pi Pico

Brand: Makerverse
The centre of your next project. Mount your RPi Pico with headers, or solder directly to the protoboard.
$5.15 AUD, inc GST

10kg Beam Load Cell

Brand: Core Electronics

A 10kg bar load cell, perfect for weighing heavier objects!

$5.85 AUD, inc GST

Makerverse Load Cell Screw Kit - M4

Brand: Makerverse

Secure your project with four 16mm countersunk M4 screws.

$3.20 AUD, inc GST

20kg Beam Load Cell

Brand: Core Electronics

A 20kg bar load cell, perfect for weighing heavy objects!

$6.55 AUD, inc GST

3kg Beam Load Cell

Brand: Core Electronics

A 3kg bar load cell, perfect for weighing small objects!

$4.35 AUD, inc GST

Makerverse Load Cell Mounting Kit

Brand: Makerverse

An acrylic kit to build your own set of scales!

$6.35 AUD, inc GST

Makerverse Nano Power Timer HAT for Raspberry Pi Pico

Brand: Makerverse

Periodically cycles power to your battery-powered projects

$12.75 AUD, inc GST

Makerverse Protoboard for Raspberry Pi

Brand: Makerverse
Breaks out and labels every GPIO to a convenient prototyping board.
$6.95 AUD, inc GST

Makerverse Plant_io SHIM

Brand: Core Electronics

Breaks out connectors for a pump, soil moisture sensor and environmental sensing with PiicoDev.

$5.30 AUD, inc GST

Adafruit STEMMA Piezo Driver Amp - PAM8904

Brand: Adafruit
Piezos make noise when you put an AC voltage across them: and the bigger the Vpp the louder they are. With your standard 3V logic microcontroller you can...
$9.95 AUD, inc GST

Grove Inventor Kit for micro:bit

Brand: Seeed Studio
The Grove Inventor Kit for micro:bit brings endless possibilities to your micro:bit, from robots to musical instruments. Using an array of modules like sensors, displays and actuators.
$144.95 AUD, inc GST

Grove Creator Kit - γ / 40 modules Arduino Starter Kit

Brand: Seeed Studio

Grove Creator Kit contains 40 different Grove modules which is a very useful kit that can help you get started with Arduino quickly.

$234.95 AUD, inc GST

Charge Pump Voltage Inverter: 1.8-5.3V, 60mA

Brand: Pololu
This tiny voltage inverter generates a negative output voltage corresponding to the voltage provided on its input, which can be from 1.8 V to 5.3 V. The ...
$7.45 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.