Search results for: 'hx711 load cell amplifier'
SparkFun Load Cell Amplifier - HX711
Brand: Sparkfun
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.
$19.05 AUD, inc GST
Adafruit HX711 24-bit ADC for Load Cells / Strain Gauges
Brand: Adafruit
If you are feeling the stress and strain of modern life a Wheatstone bridge and you want to quantify it, this handy breakout will do the job, no sweat!...
$17.40 AUD, inc GST
M5Stack Mini Weight Unit (HX711) Load Cell Amplifier
Brand: M5Stack
The M5Stack Mini Weight Unit Load Cell Amplifier integrates an HX711, 24-bit A/D chip that is specifically designed for an electronic weighing device.
$7.55 AUD, inc GST
Load Cell - 200kg, S-Type (TAS501)
Brand: Sparkfun
This S-Type load cell (sometimes called a strain gauge) can translate up to 200kg of pressure (force) into an electrical signal. Each load cell is able to measure...
$179.95 AUD, inc GST
Mini Load Cell - 500g, Straight Bar (TAL221)
Brand: Sparkfun
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 500g of pressure (force) into an electrical signal. Each load cell is...
$31.95 AUD, inc GST
Load Cell - 10kg, Straight Bar with Hook (HX711)
Brand: Sparkfun
This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal...
$43.45 AUD, inc GST
Load Cell - 50kg, Disc (TAS606)
Brand: Sparkfun
This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
$189.95 AUD, inc GST
Load Cell - 200kg, Disc (TAS606)
Brand: Sparkfun
This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
$189.95 AUD, inc GST
Similar matches
Makerverse Load Cell Amplifier
Brand: Makerverse
Reads weight or force from a load cell with 18-bit precision
$4.35 AUD, inc GST
OpAmp Breakout
Brand: Sparkfun
This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.
$12.05 AUD, inc GST
SparkFun Configurable OpAmp Board - TSH82
Brand: Sparkfun
The SparkFun TSH82 Configurable OpAmp Board was designed to give you the best combination of performance and flexibility that we could achieve by giving you two...
$13.20 AUD, inc GST
ACS711EX Current Sensor Carrier -15.5A to +15.5A
Brand: Pololu
This board is a simple carrier of Allegro’s ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 15.5 A and outputs a proportional analog voltage centered at Vcc/2 with a typical error of ±5%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.
$8.20 AUD, inc GST
SparkFun Variable Load Kit
Brand: Sparkfun
The SparkFun Variable Load Kit is a quick-to-assemble board designed to allow users to draw a specific amount of current from a voltage input. This kit can be used...
$88.80 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.