Search results for: 'load cell amplifier'

38 results

SparkFun Load Cell Amplifier - HX711

Brand: SparkFun
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.
$19.05 AUD, inc GST

Makerverse Load Cell Amplifier

Brand: Makerverse

Reads weight or force from a load cell with 18-bit precision

$4.35 AUD, inc GST

Adafruit HX711 24-bit ADC for Load Cells / Strain Gauges

Brand: Adafruit
If you are feeling the stress and strain of modern life a Wheatstone bridge and you want to quantify it, this handy breakout will do the job, no sweat!...
$17.40 AUD, inc GST

M5Stack Mini Weight Unit (HX711) Load Cell Amplifier

Brand: M5Stack

The M5Stack Mini Weight Unit Load Cell Amplifier integrates an HX711, 24-bit A/D chip that is specifically designed for an electronic weighing device.

 

 

$7.55 AUD, inc GST

SparkFun Qwiic Scale - NAU7802

Brand: SparkFun
The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting...
$30.35 AUD, inc GST

M5Stack Mini Scale Unit - 5kg (HX711)

Brand: M5Stack
Explore M5Stack's Mini Scale Unit featuring a 5kg capacity sensor, HX711 ADC chip, and integrated MCU for precise weighing in scientific and industrial applications, with I2C communication and programmable RGB indicators.
$16.15 AUD, inc GST

MAX98357 I2S Amplifier Module

Brand: DFRobot
This I2S digital amplifier based on the MAX98357 I2S Class D amplifier module works great with microcontrollers with I2S audio outputs like ESP32 and can...
$9.84 AUD, inc GST

Makerverse PAM8302 2.5W Mono Amplifier

Brand: Makerverse

A tiny, low-noise amplifier to bring sound to your project.

$3.95 AUD, inc GST

LM358AN Dual Operational Amplifier

Brand: Core Electronics
DIP-8 Package.
$1.30 AUD, inc GST

Makerverse Load Cell Mounting Kit

Brand: Makerverse

An acrylic kit to build your own set of scales!

$6.35 AUD, inc GST

Mini Load Cell - 100g, Straight Bar (TAL221)

Brand: SparkFun
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is...
$29.50 AUD, inc GST

Makerverse Load Cell Kit

Brand: Makerverse

The easiest way to begin measuring force and weight - Assemble and program your own scales with this practical kit.

$26.65 AUD, inc GST

3W Mini Audio Stereo Amplifier (W2.54)

Brand: DFRobot
This is a Mini Audio Stereo Amplifier from DFRobot. It has left and right channels that can realize stereo surround sound. The module has a mini body and 2.54mm...
$9.34 AUD, inc GST

Adjustable Dual Channel Audio Amplifier

Brand: Core Electronics

Pump up the tunes!! Use this feature-packed audio amplifier to bring a whole new sense to your projects.

$1.95 AUD, inc GST

SparkFun Load Sensor Combinator (Ver. 1.1)

Brand: SparkFun
The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s nest of wires. The Load Sensor Combinator was created to combine the 12 wires found in a bathroom scale into the standard four-wire Wheatstone bridge configuration.
$4.75 AUD, inc GST

Op-Amp - LM258P (Through-Hole)

Brand: SparkFun
The LM258P is a great, easy-to-use dual-channel Op-amp. Op-amps have so many applications we figured we should probably carry at least one in a DIP...
$0.47 AUD, inc GST

Audio Amplifier Module with Speaker for Arduino

An easy way to add audio effects or music to your next project. The compact board measures just 47mmm long and features a 23mm diameter speaker, 2W amplifier, and a trimpot for volume control. Powered from 5V.
$11.95 AUD, inc GST

Adafruit STEMMA Piezo Driver Amp - PAM8904

Brand: Adafruit
Piezos make noise when you put an AC voltage across them: and the bigger the Vpp the louder they are. With your standard 3V logic microcontroller you can...
$9.95 AUD, inc GST

General Purpose Op-Amp Linear IC - LM741

Brand: Core Electronics
8 - General purpose op-amp LM741
$2.30 AUD, inc GST

Power Supply AAA Battery Power Booster Module 5V Output

Brand: Core Electronics

Power up your LED wearable projects with this AAA Boost module.

$3.55 AUD, inc GST

Adafruit STEMMA Audio Amp - Mono 2.5W Class D - PAM8302

Brand: Adafruit
The Adafruit STEMMA Audio Amp is a super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers....
$8.85 AUD, inc GST

OpAmp Breakout

Brand: SparkFun
This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.
$12.05 AUD, inc GST

Weight Sensor (Load Cell) 0-50kg (Seeed Studio)

Brand: Seeed Studio

Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance...

$37.75 AUD, inc GST

Rigol DL-3031

Brand: Rigol
DL-3031 Electronic Loads 350W, 60A 150V...
$2010.95 AUD, inc GST

Adafruit Audio FX Sound Board - WAV/OGG Trigger with 2MB Flash

Brand: Adafruit
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want...
$34.65 AUD, inc GST

Weight Sensor (Load Cell) 0-500g (Seeed Studio)

Brand: Seeed Studio
Applicable to electronic scale, price computering scale, electronic platform scale, digital scale; parcel post scale, electronic balance and all varieties...
$35.05 AUD, inc GST

386AMP audio amplifier Module (Arduino compatible)

Brand: DFRobot
This DFRobot 386AMP audio amplifier module uses the National Semiconductor LM386 audio power amplifier chip. It has 20 voltage gain.
$20.13 AUD, inc GST

SparkFun Variable Load Kit

Brand: SparkFun
The SparkFun Variable Load Kit is a quick-to-assemble board designed to allow users to draw a specific amount of current from a voltage input. This kit can be used...
$88.80 AUD, inc GST
Similar matches

1kg Beam Load Cell

Brand: Core Electronics
A 1kg bar load cell, perfect for weighing very light objects!
$4.90 AUD, inc GST

10kg Beam Load Cell

Brand: Core Electronics

A 10kg bar load cell, perfect for weighing heavier objects!

$5.85 AUD, inc GST

20kg Beam Load Cell

Brand: Core Electronics

A 20kg bar load cell, perfect for weighing heavy objects!

$6.55 AUD, inc GST

3kg Beam Load Cell

Brand: Core Electronics

A 3kg bar load cell, perfect for weighing small objects!

$4.35 AUD, inc GST

Mini Load Cell - 500g, Straight Bar (TAL221)

Brand: SparkFun
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 500g of pressure (force) into an electrical signal. Each load cell is...
$31.95 AUD, inc GST

Load Cell - 200kg, S-Type (TAS501)

Brand: SparkFun
This S-Type load cell (sometimes called a strain gauge) can translate up to 200kg of pressure (force) into an electrical signal. Each load cell is able to measure...
$179.95 AUD, inc GST

Load Cell - 10kg, Straight Bar with Hook (HX711)

Brand: SparkFun
This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal...
$43.45 AUD, inc GST

Load Sensor - 50kg

Brand: SparkFun
This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the video below for a simple explanation on how these work and how to use them.
$12.05 AUD, inc GST

Load Cell - 200kg, Disc (TAS606)

Brand: SparkFun
This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
$189.95 AUD, inc GST

Load Cell - 50kg, Disc (TAS606)

Brand: SparkFun
This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
$189.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.