Search results for: 'jst 6-pin connector'

50 results

JST PH 2.0mm Pitch Connector Kit - 220 Piece Kit

Brand: Adafruit
Totally 220 pieces, this JST-PH Connector Kit is a must-have for your workstation. You'll have enough sockets and plugs to fuel your maker tendencies for days on...
$23.80 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 40cm

Brand: Pololu
This 40 cm (16") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$7.95 AUD, inc GST

JST PH-Style Cable, 6-Pin, Female-Female, 10cm

Brand: Pololu
This 6-conductor, 10 cm (4") cable has 24 AWG wires and 6-pin female JST PH-type connectors (2mm pitch) on both ends...
$5.40 AUD, inc GST

JST SH Vertical 6-Pin Connector - SMD

Brand: Sparkfun
Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type.
$3.85 AUD, inc GST

JST PH-Style Cable with Female Pins for 0.1" Housings, 6-Pin, 75cm

Brand: Pololu
This 6-conductor, 75 cm (30") cable has 24 AWG wires and a 6-pin female JST PH-type connector (2mm pitch) on one end. The other ends of the wires are...
$11.35 AUD, inc GST

Breadboard to GHR-06V Cable - 6-Pin x 1.25mm Pitch

Brand: Sparkfun
This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the...
$4.80 AUD, inc GST

JST SH Horizontal 6-Pin Connector - SMD

Brand: Sparkfun
Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type. Check the drawing below.
$1.60 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 75cm

Brand: Pololu
This 75 cm (30") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$8.75 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 63cm

Brand: Pololu
This 63 cm (25") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$10.05 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 25cm

Brand: Pololu
This 25 cm (10") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$6.85 AUD, inc GST

JST GH 1.25mm Pitch 6 Pin Cable - 100mm long

Brand: Adafruit
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of...
$1.95 AUD, inc GST

2.5mm Pitch 6-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$3.10 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (3-Pack, Untested)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$4.95 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry (Individually Packaged)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$2.50 AUD, inc GST

2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible

Brand: Adafruit
These solid 2.0mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect.
$2.35 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 12cm

Brand: Pololu
This 12 cm (4.5") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$3.50 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 10cm

Brand: Pololu
This 10 cm (4") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$5.60 AUD, inc GST

6-Pin Single-Ended Female JST SH-Style Cable 30cm

Brand: Pololu
This 30 cm (12") cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry...
$4.95 AUD, inc GST

USB Type C Screw Panel Mount to 6 pin JST PH Cable

Brand: Adafruit
This panel mount cable is great for making USB Type C connections with a panel-mount setup. On the small panel-mount side you get a USB C connector, the...
$6.35 AUD, inc GST

6-pin JST SM Plug + Receptacle Cable Set

Brand: Adafruit
These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...
$4.10 AUD, inc GST

Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH

Brand: Pololu
This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$3.20 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry (3-Pack, Untested)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$4.95 AUD, inc GST

Breadboard to JST-ZHR Cable - 6-pin x 1.5mm Pitch

Brand: Sparkfun
This is a 6-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The six male pins that terminate one side of the cable feature...
$4.75 AUD, inc GST

6-Pin Female-Female JST SH-Style Cable 16cm

Brand: Pololu
This 16 cm (6.3") cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor ...
$6.05 AUD, inc GST

JST SH Jumper 6 Wire Assembly - 8"

Brand: Sparkfun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket.
$3.80 AUD, inc GST

Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry (Individually Packaged)

Brand: Pololu
This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1"-pitch through holes. It works with our ...
$2.55 AUD, inc GST

Jumper Wire - 0.1", 6-pin, 6"

Brand: Sparkfun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.
$3.70 AUD, inc GST
Similar matches

JST 2-pin cable

Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with Adafruit's Lipoly charger! Adafruit don't have the 'mating' version...
$1.30 AUD, inc GST

JST connector Kit (2.54mm)

Brand: DFRobot
This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).
$11.60 AUD, inc GST

2.5mm Pitch 4-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.10 AUD, inc GST

2.5mm Pitch 3-pin Cable Matching Pair - JST XH Compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.90 AUD, inc GST

JST-PH 2-Pin SMD Connector (Side Entry)

Add a power connector to your SMD PCB designs with this  JST-PH 2-pin compatible connector...

$0.26 AUD, inc GST

JST SH 1mm Pitch 3 Pin to Socket Headers Cable - 100mm long

Brand: Adafruit
If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin...
$2.90 AUD, inc GST

JST connector Kit (2.0mm)

Brand: DFRobot
This kit includes PHR-2,PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each)and crimp contact (100 units).
$11.15 AUD, inc GST

3-pin JST SM Plug + Receptacle Cable Set

Brand: Adafruit
These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle...
$3.55 AUD, inc GST

2.5mm Pitch 2-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$1.95 AUD, inc GST

JST-PH 2 Pin Female Connector

Brand: DFRobot
This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).
$1.20 AUD, inc GST

2-pin JST SM Plug + Receptacle Cable Set

Brand: Adafruit
These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type...
$1.60 AUD, inc GST

Breakout for JST SH-Style Connector, 4-Pin Male Top-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 4-pin male connector and breadboard-compatible 0.1"-pitch through holes. They work with our...
$3.15 AUD, inc GST

2.5mm Pitch 5-pin Cable Matching Pair - JST XH compatible

Brand: Adafruit
These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible.
$2.20 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.