Search results for: 'ipex'
SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
$7.80 AUD, inc GST
Interface Cable SMA to U.FL
Brand: DFRobot
The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections.
$5.75 AUD, inc GST
RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
$7.40 AUD, inc GST
RP-SMA to U.FL Cable - 150mm
Brand: Sparkfun
This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special...
$5.40 AUD, inc GST
u.FL SMT Antenna Connector
Brand: Adafruit
u.FL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. Adafruit use this part...
$1.50 AUD, inc GST
SMA to U.FL Cable - 150mm
Brand: Sparkfun
This SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is...
$5.25 AUD, inc GST
Dual Band Antenna - U.FL (2.4GHz, 5.8GHz)
Brand: Sparkfun
This adhesive, dual-band antenna is perfect for situations when you're trying to get a signal out from a transmitter that you've jammed down into an enclosure. Operating...
$4.40 AUD, inc GST
iPEX to RP-SMA Connector (65mm)
Brand: RAKwireless
Securely link LoRa modules to external antennas with iPEX MHF-1 to RP-SMA/SMA RF coaxial cables for stable signal reception.
$8.50 AUD, inc GST
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
Brand: DFRobot
The module combines GNSS positioning and RTC functionality. Provides precise longitude, latitude, and altitude data. Compatible with Arduino, ESP32, and...
$44.70 AUD, inc GST
Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G module, Global Multi-band LTE 4G Cat-1 support, GNSS positioning, 3x USB 2.0 extended ports
Brand: Waveshare
Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G module, Global Multi-band LTE 4G Cat-1 support, GNSS positioning, 3x USB 2.0 extended ports...
$76.10 AUD, inc GST
U.FL to U.FL Mini Coax Cable - 50mm
Brand: Sparkfun
This is a nice, short U.FL to U.FL cable used to connect submodules and other RF devices to carrier boards. 50mm is length is long enough to reach, but...
$5.25 AUD, inc GST
U.FL to U.FL Mini Coax Cable - 200mm
Brand: Sparkfun
This cute little coax is a champ in our RF kit out! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL...
$6.30 AUD, inc GST
CAT1 A7670G 4G Communication Module (Compatible with Raspberry Pi / LattePanda)
Brand: DFRobot
The A7670G-H 4G Communication Module, featuring Global Coverage and support for LTE-FDD/LTE-TDD/GSM, can be used as a network card for Raspberry Pi and...
$84.30 AUD, inc GST
ISM/LoRa Compact Flexible PCB Antenna - 860-928MHz
Brand: Sparkfun
The Taoglas FXP895 is an ISM/LoRA compact flexible PCB antenna designed to fit into small devices. This antenna has been expertly designed to cover...
$17.60 AUD, inc GST
ARGOS Omnidirectional Antenna - 401MHz
Brand: Sparkfun
Designed for transmit and receive at 401MHz, this quarter-wave antenna is the perfect partner for our ARGOS ARTIC R2 satellite communication breakout board. It is...
$31.10 AUD, inc GST
XIAO ESP32S3 for Meshtastic & LoRa
Brand: Seeed Studio
This thumb-sized LoRa dev kit, featuring the XIAO ESP32S3 and Wio-SX1262 LoRa module, is an ideal starter kit for Meshtastic and LoRa/LoRaWAN projects. Supporting WiFi, BLE, and LoRa, it includes a built-in power management chip and can be extended via IIC, UART, and other GPIO interfaces, with compatibility for Arduino development.
$21.20 AUD, inc GST
2.4GHz 6dBi Antenna with u.FL / IPEX Connector
Brand: DFRobot
This might just be the perfect antenna for any 2.4GHz wireless projects. It's an omnidirectional antenna with a u.FL connector (also known as a uFL, IPX, or IPEX RF) to interface with most wireless microcontroller boards.
$8.15 AUD, inc GST
LTE Wide Band Flex Antenna (698–3000MHz)
Brand: Sparkfun
This easy-to-install durable, polymer antenna operates on greater than 45% efficiency on LTE bands from 698MHz to 3000MHz...
$21.95 AUD, inc GST
2.4GHz Mini Flexible WiFi Antenna with uFL Connector - 100mm
Brand: Adafruit
This 4" / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50O impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter...
$4.60 AUD, inc GST
SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
Brand: Waveshare
SIM7600G-H M.2 4G HAT For Raspberry Pi, LTE CAT4 High Speed, Global Coverage Multi Band, 4G/3G/2G Compatible, GNSS...
$139.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.