Search results for: 'inter-integrated circuit keypad'

Showing results for inter-integrated circuit keypad

49 results

SparkFun Qwiic Keypad - 12 Button

Brand: SparkFun
Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmware that wastes valuable processing...
$22.95 AUD, inc GST

Adafruit LED Arcade Button 1x4 - STEMMA QT I2C Breakout - STEMMA QT / Qwiic

Brand: Adafruit
The only thing better than a glowy arcade button is, perhaps, FOUR glowing arcade buttons - and that's what the Adafruit LED Arcade Button 1x4 QT...
$18.20 AUD, inc GST

Pimoroni Pico RGB Keypad Base

Brand: Pimoroni
Connect a glorious, squishy, 4x4 rainbow-illuminated keypad to your Raspberry Pi Pico - perfect for making a custom USB input device!
$58.65 AUD, inc GST

Adafruit Blue&White 16x2 LCD+Keypad Kit for Raspberry Pi

Brand: Adafruit
This new Adafruit Pi Plate makes it easy to use a blue and white 16x2 Character LCD. Adafruit really like the 16x2 Character LCDs Adafruit stock in the shop. Unfortunately...
$50.05 AUD, inc GST

NeoKey 1x4 QT I2C - Four Mechanical Key Switches with NeoPixels - STEMMA QT / Qwiic

Brand: Adafruit
The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit NeoKey 1x4 QT I2C Breakout will let you do! This longgg 3" x 0.8" PCB fits four Cherry MX or compatible switches and make it easy to use with a breadboard/perfboard or with a STEMMA QT (Qwiic) connector for instant I2C connectivity on any platform.
$18.55 AUD, inc GST

Thru-hole 5-way Navigation switch

Brand: Adafruit
This navigation switch is an intuitive way to add 5 button's worth of interfacing with a single component. Inside is 5 switches: left, right, up, down and 'select'...
$3.85 AUD, inc GST

Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
It's a GPIO expander, it's a keypad matrix driver... its the Adafruit TCA8418 Keypad Matrix and GPIO Expander Breakout - a cute and powerful I2C...
$10.60 AUD, inc GST

CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

Brand: Adafruit
Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This...
$14.05 AUD, inc GST

Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad

Brand: Adafruit
By popular request, Adafruit have upgraded Adafruit's popular Trellis elastomer button kits to now have a PCB with full color NeoPixel support! You heard that right, no more single-color...
$25.60 AUD, inc GST

Rugged Metal Pushbutton with Black Finish - 16mm 6V RGB Latching

Brand: Adafruit
By popular demand, Adafruit now have latching rugged metal push buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. Simply drill a 16mm hole into any material up to 1/4" thick and you can fit these in place – there's even a rubber gasket to keep water out of the enclosure.
$26.30 AUD, inc GST

Adafruit Trellis Monochrome Driver PCB for 4x4 Keypad & 3mm LEDs

Brand: Adafruit
This item is just for the Trellis driver PCB assembly: LEDs and buttons not included. Trellis is an open source backlight keypad driver system. It is easy to use...
$16.95 AUD, inc GST

Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD

Brand: Adafruit
This new Adafruit shield makes it easy to use a 16x2 Character LCD. The 16x2 Character LCD is NOT, repeat, NOT, included Adafruit really like the range of LCDs Adafruit stock...
$19.35 AUD, inc GST

Arduino LCD1602 Keypad Shield I2C RGB Text

Brand: DFRobot
This Arduino I2C shield with a 16×2 RGB LCD screen features multiple IO expansion ports and keys, suitable for interactive projects or data monitoring...
$25.30 AUD, inc GST

SparkFun MicroMod Input and Display Carrier Board

Brand: SparkFun
The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded...
$99.45 AUD, inc GST

Button Pad 4x4 - Breakout PCB

Brand: SparkFun
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad.
$26.15 AUD, inc GST

Gravity: Analog ADKeyboard Module V2

Brand: DFRobot
This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project.
$8.70 AUD, inc GST
Similar matches

Logic Level Converter Bi-Directional

Brand: Makerverse
This Bi-Directional Logic Level Converter is a breadboard-friendly device that converts between 5V and 3.3V logic.
$2.95 AUD, inc GST

4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

Brand: Adafruit
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to...
$7.40 AUD, inc GST

Logic Level Shifter, 4-Channel, Bidirectional

Brand: Pololu
This tiny logic level shifter features four bi-directional channels, allowing for safe and easy communication between devices operating at different logic levels. It can convert signals as low as 1.5 V to as high as 18 V and vice versa, and its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including I²C, SPI, and asynchronous TTL serial.
$5.90 AUD, inc GST

4x3 Button matrix keypad

Brand: Core Electronics
Maximize your input possibilities with our 4x3 Button Matrix Keypad! Featuring numeric, star, and hash keys, this versatile keypad conserves IO while adding functionality to any project. Perfect for Makers looking to streamline their designs.
$5.80 AUD, inc GST

4x4 Matrix Keypad

Brand: Adafruit
Punch in your secret key (or Jenny's number) into this numeric matrix keypad. This keypad has 16 buttons, arranged in a telephone-line 4x4 grid. The keys are connected...
$12.30 AUD, inc GST

74HC595 Shift Register - 3 pack

Brand: Adafruit
Add lots more outputs to a microcontroller system with chainable shift registers. These chips take a serial input (SPI) of 1 byte (8 bits) and then output those...
$5.90 AUD, inc GST

4x3 Membrane Matrix Keypad

Brand: Core Electronics

Access granted - Add a low-profile keypad to your projects.

$1.10 AUD, inc GST

Adafruit Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic

Brand: Adafruit
Make a game or robotic controller for any I2C microcontroller or microcomputer with this tiny gamepad breakout board. This design has a 2-axis thumb...
$15.50 AUD, inc GST

Adafruit Push-button Power Switch Breakout

Brand: Adafruit
The Adafruit Push-button Power Switch is a tidy little design that lets you control a DC power source using an everyday tactile button. The breakout uses a latching...
$11.10 AUD, inc GST

3x4 Phone-style Matrix Keypad

Brand: Adafruit
Hey, Jenny, I've got your number! And I'm going to dial 867-5309 into this very nice phone-style matrix keypad. This keypad has 12 buttons, arranged in a telephone-line...
$17.90 AUD, inc GST

Gravity: I2C RGB LED Colorful Button Module

Brand: DFRobot
This I2C button module with RGB LED not only supports reading button status like conventional ones, but also controlling RGB LED color and switching...
$16.22 AUD, inc GST

LCD Keypad Shield For Arduino

Brand: DFRobot
This is a very popular LCD Keypad shield for Arduino or Freeduino board. It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The LCD shield supports contrast adjustment and backlit on/off functions. It also expands analog pins for easy analog sensor reading and display.
$15.76 AUD, inc GST

SparkFun Qwiic Directional Pad

Brand: SparkFun
The SparkFun Qwiic Directional Pad adds a 5-way directional pad to your I2C bus!...
$13.85 AUD, inc GST

Adafruit ISO1540 Bidirectional I2C Isolator - STEMMA QT / Qwiic

Brand: Adafruit
Sometimes you'll find yourself with an I2C bus controller on one side, and an I2C bus device on the other and you gotta keep em (electrically) separated. Maybe because one is Earth-grounded, maybe because you've got some funky power monitoring setup, maybe you want to reduce noise.
$17.25 AUD, inc GST

Sealed Membrane 4*4 button pad with sticker

Brand: DFRobot
The 4x4 Keypad is a general purpose 16 button (4x4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.
$3.07 AUD, inc GST

Gravity: IIC to Dual UART Module

Brand: DFRobot
This IIC to Dual UART module offers data transmission rate up to 1Mbps, and each sub UART has independent 256-byte FIFO hardware buffer for transmitting and receiving. The baud rate, word length, and check format of every sub UART can be set independently.
$13.16 AUD, inc GST

Keypad - 12 Button

Brand: SparkFun
This is a basic 12 button keypad that has been designed for easy user input and functionality. The buttons are set up in a matrix format. This allows a microcontroller...
$9.80 AUD, inc GST

Membrane LED Keypad + extras

Brand: Adafruit
This membrane keypad has a single key, but it does have an embedded surface-mount red LED installed. The flex cable is also extra-long, so they can think of a lot...
$5.40 AUD, inc GST

Membrane 3x4 Matrix Keypad + extras - 3x4

Brand: Adafruit
Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane...
$8.05 AUD, inc GST

8-channel Bi-directional Logic Level Converter - TXB0108

Brand: Adafruit
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to...
$15.85 AUD, inc GST

Button Pad 4x4 - LED Compatible

Brand: SparkFun
This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your choice with the ability to display simple colors under each button. Mainly, we wanted to use our tri-color LEDs to create a full RGB color for each button.
$12.40 AUD, inc GST

Silicone Elastomer 4x4 Button Keypad - for 3mm LEDs

Brand: Adafruit
So squishy! These silicone elastomer keypads are just waiting for your fingers to press them. Go ahead, squish all you like! (They're durable and easy to clean...
$10.80 AUD, inc GST

Membrane 1x4 Keypad + Extras

Brand: Adafruit
Punch in your secret key into this numeric membrane keypad. This keypad has 4 buttons, and since every key has its own wire line, no matrix code is required - just...
$6.05 AUD, inc GST

Two Key Black Aluminum Keypad Shell Enclosure - MX Compatible Switches

Brand: Adafruit
For all the DIY keebfans in the house here is a super sleek and sturdy 2-Key Aluminum Keypad Shell in Black, the perfect base to begin your...
$27.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.