Search results for: 'cowbell'

Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. Adafruit particularly like this speaker...

Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, connect one pin to...

Upgrade your sound system with our Thin Speaker! Measuring just 28mm, this 4 Ohm, 2.5W speaker is sleek and powerful. Perfect for any DIY audio project.

Buzz! Buzz! The buzzer module makes sound for your project.

Play simple tones or even melodies - add an audible alert to your project.

The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can play and mix up to 14 stereo tracks simultaneously and independently, with very low latency. Tracks can be controlled via 16 programmable trigger inputs, or by using a native serial control protocol or even MIDI.

This speaker module is based on the 8002 speaker amplifier IC. It can be used as a buzzer and also play high quality audio. Volume output is controlled via the potentiometer.

This Piezo Alarm is a great option for when you need an audible alarm (or are just looking for a way to prank your friends). This alarm has 16 different output options...

This is an Arduino compatible sound level meter(also known as decibel meter, noise meter). It uses instrument circuit, low noise microphone, which make it accurately...

Listen up! This tiny 1" diameter speaker cone is the perfect addition to any small audio project where you need an 8 O impedance and will be using 0.5W or less of...

The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output...

The buzzer Bit is just what it sounds like: it makes a noise that you just can't ignore. It buzzes whenever it gets an ON signal. Try using it to make your own doorbell or alarm!

The SparkFun Qwiic Buzzer adds simple beeps and buzzes to your projects via I2C. Make some noises to alert you when something interesting happens...

This electromagnetic transducer is a compact way to add sound to your embedded project: just supply it with a PWM signal at 3 V to 7 V and it will produce...

The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once.

Create silent vibration feedback to make your projects more tactile and interactive.

This is a small 15mm round speaker that operates around the audible 2kHz range...

This electromagnetic transducer is a compact way to add sound to your embedded project: just supply it with a PWM signal at 4 V to 6 V and it will produce...

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.

THE REACTOR'S MELTING DOWN! GRAB THE FUEL CORE, JENNA, AND EVACUATE THE COMMAND CENTER! With this Rotating LED Warning Light with Adjustable Volume...

Generate your own alarm sounds or simple tones – perfect for audible notifications, alarm systems, or simple musical applications.

The sound trigger listens to the noise level in your room, and sends an ON signal when it gets over a certain level. You can make that threshold louder or softer using the included screwdriver. We like to use it with an LED to light up your room when you snap your fingers.

Based on a new generation ARM Cortex M7, the Qwiic Tsunami extends polyphony to 25 mono or 13 stereo simultaneous uncompressed 44.1kHz, 16-bit tracks...

Its a floor wax! Its a dessert topping! It's an all-in-one benchtop multimeter that's also a bluetooth speaker, alarm clock and thermometer. It...

This module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears.

This 1W, 8 Ohm speaker is only 20mm in diameter and is 4mm thick...

Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control. MP3s are stored on FAT16 formatted SDSC or FAT32 formatted SDHC micro-SD flash memory cards. In addition, optimized code can achieve 192Kbps stereo playback from a wider range of cards.

Based on a new generation ARM Cortex M7, the Qwiic Tsunami extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44.1kHz, 16-bit tracks...

A small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.