Search results for: 'antenna connection cable'

SMA to I-PEX Cable for LoRa Antennas...

This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration.

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately...

This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond enabling you to tune in to FM radio stations, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and Radio Broadcast Data Service (RBDS) information. The Si4703 even does a very good job of filtering and carrier detection. It also enables data such as the station ID and song name to be displayed to the user.

This is a very simple 1m long TNC to RP-SMA cable. We like to use this cable to connect our ultra high-frequency RFID antennas to an equally powerful reader board...

This is a basic SMA male to female connector cable at 1M in length and RG174 housing...

This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots...

PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.

This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to a BNC antenna...

The SparkFun Digi XBee® Kit is your ticket to remote sensing adventures...

RF cables are required when connecting RF Explorer to other instruments or devices. This 50cm cable is good for any frequency up to 3GHz, and can fit RF...

N-type to SMARS Cable to connect LoRa Gateway to Fibreglass antenna and extend the coverage...

This is a mini antenna for tiny Seeed Studio XIAO ESP32C3 microcontroller board. With rugged and effective hardware design, the antenna increases the...

This RF connector is ideal to use RF Explorer deployed horizontally, with any antenna connected onto it. For instance when you are on the road and you...

This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF loss as possible...

All RF connectors wear with use. The RF Explorer SMA ports are subject to minimal wear each time the connector interface is coupled and de-coupled with...

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...

This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special...

Fibreglass LoRa antenna with gain of 8dBi, frequency range 858-878MHz and 130cm length...

This is a basic SMA male to female connector cable at 25cm in length and RG174 housing...

The SparkFun GPS-RTK Dead Reckoning Kit provides you with what you need to start with GPS Real Time Kinematics and the u-blox ZED-F9R...

The 915MHz SiK Telemetry Radio V3 is a lightweight and inexpensive open source radio platform that can allow for ranges of 300m or more out of the box...

This SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is...

If you are doing biomedical instrumentation or maybe RF work or just need to get signal from here to there, cleanly, you will love this cable! It's extremely thin...

A flexible, paper-thin GNSS Antenna with a U.FL connector and an adhesive backing...

Most antennas have SMA or RP-SMA connectors on them, how are you going to connect them to your little RF module? This little cable will bridge the...

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connections.

High Gain Omni Antenna specifically design for LoRa Gateway applications and a zero compromise setup.

The Argon is a powerful Wi-Fi enabled development kit that can act as either a standalone Wi-Fi endpoint or Wi-Fi enabled gateway for Particle Mesh networks

Enable LTE Cat-4 4G/3G/2G communication and GNSS Positioning for your Raspberry Pi

LoRa Antenna for devices from the E5 series with maximal gain of 2.6dBi and frequency of 902-928MHz...

This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots...

The expandable Aluminum Alloy Vertical M.2 Expansion Support Case is designed for LattePanda Sigma, suitable for installing various non-standard M.2...

The 20cm IPEX4 to SMA Adapter Cable is designed for LattePanda SBCs wireless communication. Features high-quality, stable signal transmission and...

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view of the sky while you stay in d...

The versatile Monitor One IP67 enclosure now for the deployment of Particle's Tachyon and Muon products, as well as any Raspberry Pi projects…