Search results for: &#039;air pump&#039;

Blower - Squirrel Cage (12V)

This DC Blower really moves some air! Pulling about 1Amp @ 12VDC, this blower is rated at 16CFM (although it seems like more to us). We’ve used this blower to build small hovercrafts and to cool off on a hot day, they’re also handy for inflating “transforming” e-textiles garments!

$23.70 AUD, inc GST

Silicone Tubing for Air Pumps and Valves - 3mm ID - 1 Meter Long

This soft and flexible silicone tubing is designed to go with Adafruit's simple air pumps. Great for making air-powered projects with Adafruit's set of air pumps and vacuums as well as air valves.

$5.80 AUD, inc GST

6V Air Valve with 2-pin JST PH Connector - FA0520E

Here's a cool new valve for makers interested in pneumatic systems, hydraulics, inflatables, projects with compressed air, and the like. These air valves, also known by other names like, automatic bleeding valve or air release valve, are typically used to passively release air from a pressurized container.

$6.65 AUD, inc GST

T-Connector For Silicone Tubing - 5 Pack

These go great with Adafruit's silicone tubing for air pumps and valves - great for making adapters or splitters. The three ports have an outer diameter of about 4mm, so 3mm ID silicone tubing with make a nice seal. Comes in a pack of 5, so you have plenty to mess with.

$8.15 AUD, inc GST

Solenoid Valve-DN20

Use this 12V solenoid valve to control the flow of liquid! This is an automated and manual solenoid valve that comes with three colors control wires: red, yellow...

$53.55 AUD, inc GST

6V 2-Position 3-Way Air Valve for Arduino

This practical 2-Position 3-Way Air Valve can be used to change the direction of the air outlet, also can be used as a valve switch...

$6.95 AUD, inc GST

2-Prong Barbed Fitting Connector for Silicone Tubing - 5-pack

These go great with Adafruit's silicone tubing for air pumps and valves - great for making adapters or extenders. The two ports have an outer diameter of about 4mm, so 2-3mm ID silicone tubing will make a nice seal.

$6.65 AUD, inc GST

Plant_io - Plant Cultivation Kit

Brand: Makerverse

Grow and learn! An open-source DIY project kit for plant-cultivation experiments.

$166.40 AUD, inc GST

Solenoid Valve-DN15

Use this 12V solenoid valve to control the flow of liquid! This is an automated and manual solenoid valve that comes with three colors control wires: red, yellow...

$53.40 AUD, inc GST

SafetyPro AP2 Max - Air Purifier

Brand: xTool

Maintain a safe, odour-free indoor workshop. Featuring SuperCyclone™ technology and 7-stage filtration, this unit removes 99.97% of particulates and automates airflow when paired with xTool Laser Machines.

$4326.48 AUD, inc GST

F1031V Mass Air Flow Sensor

F1031V Mass Air Flow Sensor adopts thermodynamic principle to detect flow rate of gas medium in the flow channel, with high precision and good repeatability. It...

$179.95 AUD, inc GST

Altitude/Pressure Sensor Breakout - MPL3115A2

Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it’s easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.

$27.70 AUD, inc GST

Similar matches

Solder Pump

Brand: Core Electronics

Mistakes happen, or sometimes you need to desolder a component off a board. Like you have an eraser for your pencil, you should probably have a solder pump for your iron. Combined with some wick there's not much that can't be removed using a tool like this when soldering with the right technique.

$2.25 AUD, inc GST

This 300W hot air handheld SMD Rework tool provides a quick and easy way to rework boards fitted with surface mount parts, including RoHS certified products. It works by blowing 300 watts of heated air onto the board your are working on, melting the solder on the SMD pads in the process.

Hot Air Rework 300W

Brand: Core Electronics

$179.95 AUD, inc GST

Desoldering Pump

This is a compact,spring loaded desoldering pump. It is a very useful tool for desoldering components from PCBs. ProsKit DP-366D Desoldering Pump with suction capability 35 cm-Hg. It's made of ABS plastic.

$13.30 AUD, inc GST

SparkFun Qwiic MicroPressure Sensor

The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor...

$72.35 AUD, inc GST

Panavise Jr. - Vacuum Base

The Panavise Jr. is a great vise with a vacuum base. Its jaws open up to about 3" and have grooves for PCBs. It’s perfect for light duty field repairs, electronics, hobby and dozens of other projects. This is an exceptionally lightweight, portable vise that firmly attaches to any flat, smooth non-porous surface. A single knob locks the head into position, while a second knob locks the arm at the angle you select.

$64.80 AUD, inc GST

Hot Air Helper Rework Station Plate with Two Ring Clamps

There's always that point in a hot-air rework session where you're just holding the wand and thinking "man I wish there was a way for me to not hold this unwieldy thing".

$159.95 AUD, inc GST

Emblaser 2 Bundle - With Air Filtration Unit (F2000)

Designed, engineered and proudly made in Australia, the Emblaser 2 is the latest laser cutter and engraver from DarklyLabs

$5050.00 AUD, inc GST

xTool M2 Colour Craft Laser Cutter - Standalone Machine (20W)

Brand: xTool

Print in full colour, then cut it out on the same desktop machine. 20W of diode power handles more materials without a second pass.

$1599.00 AUD, inc GST

xTool M2 20W Colour Craft Laser Cutter - Deluxe Bundle

Brand: xTool

All of the extra accessories you need to unlock the full capability of the M2 - allowing for the full print, cut and engrave process on flat and round materials.

$2295.00 AUD, inc GST