xTool M2 20W Colour Craft Laser Cutter - Deluxe Bundle
All of the extra accessories you need to unlock the full capability of the M2 - allowing for the full print, cut and engrave process on flat and round materials.
Available with a lead time
Expect dispatch between Sep 30 and Oct 01
This product incorporates a laser system. Before purchasing or using laser equipment (including modules, components, or complete machines such as laser cutters and engravers), please consider the following:
- These products are intended for professional, educational, industrial, or supervised workshop environments.
- Operators should be appropriately trained and understand laser safety practices, including enclosures, signage, PPE, and safe operating procedures where applicable.
A declaration of use will need to be submitted during checkout.
Full-colour printing and laser cutting finally live inside the same desktop enclosure. Print a design, then let the machine contour-cut around it - one setup, one alignment, no additional steps.
Print-then-cut workflows normally mean two devices and a tedious material registration step between them, and every misalignment can cost a sheet of material. Dual onboard cameras handle placement here, so what you see on the canvas is where the laser goes.
A massive range of materials can be used on this machine, paper, felt, acrylic, cardboard just to name a few - and delve into metal etching with the optional 3W IR Laser Module. Keep your workshop fume free with the xTool SafetyPro AP2 Air Purifier.
Features
- Includes all of the basic add-ons you can start cutting ASAP!
-
Places your design exactly where you put it on screen, using dual built-in cameras rather than manual jigging
-
Adds true print-then-cut with the optional CMYK inkjet head, so stickers and labels come off the bed finished
-
Holds thin stock without fuss, magnetic fixtures clamp material up to 6 mm, thicker pieces sit on top of them
-
Runs a built-in air pump for cut quality comparable to an external air-assist system, with adjustable airflow
-
Fully enclosed Class 1 operation, safe to run on a desk in a shared room
- Cuts thicker material in fewer passes than the 10W, thanks to the 20W blue diode module - less edge charring from repeated cuts
Specifications
|
Property |
Specification |
|---|---|
|
Laser type |
20W blue diode |
|
Processing modes |
Laser engraving, laser cutting, inkjet printing |
|
Safety certification |
Class 1 (fully enclosed) |
|
Machine dimensions |
610 x 569 x 180 mm |
|
Weight |
12.3 kg |
|
Max machine input power |
200 W |
|
Power adapter input |
100-240 V AC, 50/60 Hz |
|
Cylindrical engraving |
0-100 mm diameter, no riser base required |
|
Air assist |
Built-in pump; no external air port |
|
Software |
xTool Studio |
Resources
What's Included
- xTool M2 CMYK Inkjet Printing Module
- xTool RA3 Lite Rotary Attachment for M2
-
Required Power Adapter and Cables
intro
3W IR module and Air Filter/Purifier sold separately
Ink refill cartridges can be purchased here.
rest of page
This bundle contains:
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
40 Aruma Place
Cardiff
NSW, 2285
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
xTool P2S 55W Desktop CO2 Laser CutterSKU: CE10392 Brand: xToolEnclosed desktop laser cutter for precision cutting and vivid engraving, with ...
- xTool P3 80W CO2 Laser Cutter All-in-One BundleSKU: CE11114 Brand: xTool
All-in-one laser cutter with a 14-camera vision system and ACS workflow for a ...
- M1 Ultra Advanced Bundle (Includes Blade, Pen, and Inkjet)SKU: CE10469 Brand: xTool
Streamline your project progression by combining a laser, blade, pen, and ink ...
- MetalFab 1200W All-in-One: Laser Welder + CNC Laser Cutter BundleSKU: CE10390 Brand: xTool
A compact, all-in-one metalwork system with industrial quality and power - we ...
Videos
View AllGuides
xTool P3 First Time Cutting Quick Start Guide
Setting Up Your xTool P3 | From Unboxing to First Cut
xTool P3 Overview | A New Standard for Making?
The Maker Revolution
Projects
The Rats Nest VCC Desktop Power Supply
Remote-Controlled Mars Rover
FlipperMate: Hands-Free Pinball
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments