Search results for: &#039;adc amplifier&#039;

Analog Output K-Type Thermocouple Amplifier - AD8495 Breakout

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. Adafruit have a couple digital thermocouple amplifiers in the shop already...

$20.60 AUD, inc GST

M5Stack Mini Weight Unit (HX711) Load Cell Amplifier

Brand: M5Stack

The M5Stack Mini Weight Unit Load Cell Amplifier integrates an HX711, 24-bit A/D chip that is specifically designed for an electronic weighing device.

$7.55 AUD, inc GST

A 16-bit self-calibrating analog-to-digital converter that operates on I2C

M5Stack ADC I2C Unit v1.1 (ADS1110)

Brand: M5Stack

$11.95 AUD, inc GST

SparkFun Ambient Light Sensor - VEML7700 (Qwiic)

The SparkFun Qwiic VEML7700 Ambient Light Sensor provides accurate, 16-bit ambient light readings from 0 to 167,000 lux via the I2C interface. This...

$12.50 AUD, inc GST

Out of stock

SparkFun Current Sensor Breakout - ACS723 (Low Current)

The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications...

$33.05 AUD, inc GST

SparkFun Electret Microphone Breakout

This small breakout board couples an Electret microphone (100Hz--10kHz) with a 60x mic preamplifier to amplify the sounds of voice, claps, door knocks or any sounds loud enough to be picked up by a microcontroller’s analog-to-digital converter.

$16.45 AUD, inc GST

Fermion: MEMS Microphone Module

This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the...

$4.80 AUD, inc GST

KR Sense Current and Voltage Sensor - 45A

The KR Sense 45A is a small voltage and current sense breakout board. DC current is determined by measuring a voltage drop across a parallel shunt resistor, then...

$44.20 AUD, inc GST

Out of stock

The ADC Pi is an 8 channel 17 bit analogue to digital converter designed to work with the Raspberry Pi. The ADC Pi is based on two Microchip MCP3424 A/D converters each containing 4 analogue inputs. The MCP3424 is a delta-sigma A/D converter with low noise differential inputs.

ADC Pi

Brand: AB Electronics

$41.60 AUD, inc GST

SparkFun Qwiic Scale - NAU7802

The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting...

$30.35 AUD, inc GST

Electret Microphone Amplifier - MAX4466 with Adjustable Gain

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone...

$13.40 AUD, inc GST

SparkFun Analog MEMS Microphone Breakout - SPH8878LR5H-1

The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the SPH8878LR5H-1 analog microphone from Knowles...

$15.15 AUD, inc GST

Adafruit HUZZAH32 – ESP32 Feather Board (pre-soldered)

Aww yeah, it's the Feather you have been waiting for, this time with pre-assembled headers! The HUZZAH32 is Adafruit's ESP32-based Feather, made with the official WROOM32...

$36.70 AUD, inc GST

Gravity: I2C Non-contact IR Temperature Sensor (MLX90614-DCI)

We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object...

$114.95 AUD, inc GST

Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes...

$26.80 AUD, inc GST

Gravity: Analog EMG Sensor by OYMotion

This EMG sensor is launched by the cooperation of DFRobot and OYMotion, which can detect sEMG to reflect muscle and neural activities of human. This sensor integrates...

$83.10 AUD, inc GST

ReSpeaker Lite 2-Mic Array Voice Kit (inc ESP32-S3)

Brand: Seeed Studio

The kit integrates the ReSpeaker Lite dual-microphone array and a powerful pre-soldered XIAO ESP32S3 processor, offering exceptional voice recognition, noise reduction, and voice processing capabilities thanks to its onboard AI NLU algorithms.

$49.90 AUD, inc GST

Adafruit RP2040 Prop-Maker Feather with I2S Audio Amplifier

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. By picking a feather and stacking on a...

$44.15 AUD, inc GST

SparkFun Qwiic 12 Bit ADC - 4 Channel (ADS1015)

A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled...

$31.70 AUD, inc GST

Gravity: 0-10V 15-Bit Dual-Channel High-Precision ADC Module for Arduino / Raspberry Pi / ESP32

15-bit high-precision 0-10V ADC module with dual I2C/UART interfaces. Designed for Arduino, Raspberry Pi, and ESP32. For industrial automation &...

$21.35 AUD, inc GST

Brand: Espressif ESP32 & ESP8266

SparkFun WiFi Shield - ESP8266

The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ESP8266, including tiny, modular boards and more accessible development boards like our very own SparkFun ESP8266 Thing. The ESP8266 WiFi Shield finds a middle ground between the Module and the Thing that provides a great introduction to the ESP8266 – without leaving the comfortable hardware confines of your Arduino. If you just have an Arduino project that needs an inexpensive gateway to the Internet, the ESP8266 WiFi Shield does everything from turning on an LED to posting data with phant.io.

$33.05 AUD, inc GST

Electret Microphone Amplifier - MAX9814 with Auto Gain Control

Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone...

$14.30 AUD, inc GST

Adafruit Silicon MEMS Microphone Breakout - SPW2430

Listen to this good news - Adafruit now have a breakout board for a super tiny MEMS microphone. Just like 'classic' electret microphones, MEMS mics can detect sound and...

$9.20 AUD, inc GST

Out of stock

Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade) - v2.0

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced...

$28.25 AUD, inc GST

High Power Bluetooth Power Amplifier Board

Starting to build your dream Speakers with this Bluetooth Power Amplifier board! This cost-effective high power Bluetooth amplifier board features 100W output power...

$26.05 AUD, inc GST

SparkFun Load Cell Amplifier - HX711

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.

$19.05 AUD, inc GST

Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier - STEMMA QT / Qwiic

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9601 I2C Thermocouple Breakout (a.k.a MCP96L01) does all that for you and can be easily interfaced with any microcontroller or single-board computer with I2C.

$28.45 AUD, inc GST

Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. So far Adafruit have carried the very nice MAX31855 which is an SPI interface...

$25.80 AUD, inc GST

Adafruit MCP9600 I2C Thermocouple Amplifier - K, J, T, N, S, E, B and R Type T

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9600 does all that for you, and can be easily interfaced...

$30.15 AUD, inc GST

3W Mini Audio Stereo Amplifier (W2.54)

This is a Mini Audio Stereo Amplifier from DFRobot. It has left and right channels that can realize stereo surround sound. The module has a mini body and 2.54mm...

$9.90 AUD, inc GST

Bluetooth 4.2 Audio Receiver Board-with an Amplifier (2x5W)

A small size and cost-effective Bluetooth 4.2 Audio Receiver with dual 5W power amplifier circuits. It can auto-reconnect and can be powered via USB or LiPO…

$6.40 AUD, inc GST

Bring your amplifier case design projects up to date with the Kitronik Bluetooth Stereo Amplifier kit and play music from a phone, tablet or computer...

Kitronik Bluetooth Stereo Amplifier Module

Brand: Kitronik

$24.35 AUD, inc GST

This top-of-the-range MCP9600 thermocouple amplifier breakout works with eight different thermocouple types, has built-in temperature alerts, is compatible with Raspberry Pi, Arduino, and with our no-solder Breakout Garden HAT.

Pimoroni MCP9600 Thermocouple Amplifier Breakout

Brand: Pimoroni

$46.55 AUD, inc GST

Gravity: CT1780 1-Wire K-Type Thermocouple Amplifier (-270°C to +1372°C Temp Range)

Accurately measure extreme temperatures (-270°C to 1372°C) with the Gravity CT1780 1-Wire K-Type Thermocouple Amplifier. Ideal for ovens, kilns, and furnaces...

$33.40 AUD, inc GST