Search results for: '2.4 ghz antenna'

50 results

PCB Antenna - U.FL (2.4GHz)

Brand: Sparkfun
This small form-factor antenna offers a 2.4GHz frequency range. These antennas offer adhesive backing that simplifies mounting within the device for a FPC or PCB...
$3.80 AUD, inc GST

2.4GHz 6dBi Antenna with u.FL / IPEX Connector

Brand: DFRobot
This might just be the perfect antenna for any 2.4GHz wireless projects. It's an omnidirectional antenna with a u.FL connector (also known as a uFL, IPX, or IPEX RF) to interface with most wireless microcontroller boards.
$8.15 AUD, inc GST

2.4GHz Rod Antenna for XIAO ESP32C3

Brand: Seeed Studio
This is a mini antenna for tiny Seeed Studio XIAO ESP32C3 microcontroller board. With rugged and effective hardware design, the antenna increases the...
$5.90 AUD, inc GST

Raspberry Pi Compute Module Antenna Kit

Brand: Raspberry Pi

The Compute Module Antenna Kit is certified for use with Raspberry Pi Compute Module 4 and 5

$7.95 AUD, inc GST

Dual Band Antenna - U.FL (2.4GHz, 5.8GHz)

Brand: Sparkfun
This adhesive, dual-band antenna is perfect for situations when you're trying to get a signal out from a transmitter that you've jammed down into an enclosure. Operating...
$4.40 AUD, inc GST

2.4GHz Mini Flexible WiFi Antenna with uFL Connector - 100mm

Brand: Adafruit
This 4" / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50O impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter...
$4.60 AUD, inc GST

600-6000MHz 5G Antenna

Brand: DFRobot
These 5G antennas are designed for 5G modules and equipment that require high efficiency and peak gain to deliver excellent throughput for access points, terminals...
$13.20 AUD, inc GST

LTE Wide Band Flex Antenna (698–3000MHz)

Brand: Sparkfun
This easy-to-install durable, polymer antenna operates on greater than 45% efficiency on LTE bands from 698MHz to 3000MHz...
$21.95 AUD, inc GST

2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi

Brand: Adafruit
This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50O impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter...
$19.10 AUD, inc GST

2.4GHz Whip Rubber Antenna (Seeed Studio)

Brand: Seeed Studio
The 2.4 GHz whip antenna is a compact, omnidirectional high performance antenna for 2.4 GHz band including WiFi, ZigBee, Bluetooth, Video, ISM, etc. This...
$9.50 AUD, inc GST

Wide Band 4G LTE Internal FPC Antenna

Brand: Sparkfun
A Wide Band, 700-2700Mhz frequency range, 4G LTE antenna provides a wide enough range for a number of applications including BLE & LoRa/RF. This antenna is 53mm...
$4.30 AUD, inc GST

2.4GHz Duck Antenna RP-SMA

Brand: Sparkfun
2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long.
$25.40 AUD, inc GST

Directional Patch 2.4Ghz SMA Articulated Antenna (Seeed Studio)

Brand: Seeed Studio
The 2.4Ghz directional antenna is a high gain, excellent choice to use RF Explorer analyzer to scan in a specific direction. As opposed to omnidirectional...
$25.85 AUD, inc GST

2.4GHz Dipole Swivel Antenna with RP-SMA - 2dBi

Brand: Adafruit
This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50O impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter...
$14.60 AUD, inc GST

2.4GHz Duck Antenna RP-SMA - Large

Brand: Sparkfun
Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance.
$30.90 AUD, inc GST

RF Explorer Cloverleaf dual band 2.4&5.8Ghz omnidirectional SMA

Brand: Seeed Studio
The CloverLeaf omnidirectional antenna is the perfect choice to use RF Explorer in 2
$32.50 AUD, inc GST

RP-SMA Male to SMA Female Adapter

Brand: Sparkfun
This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.
$4.05 AUD, inc GST

M.2 E Key WiFi7 Bluetooth 5.4 Intel BE200 Wireless Network Card for LattePanda Sigma

Brand: DFRobot
With advanced WiFi7 technology and Bluetooth 5.4, this M.2 Intel BE200 wireless network card ensures stable connections across the 2.4GHz, 5.8GHz, and...
$58.95 AUD, inc GST

RP-SMA Connector (PCB edge mount)

Brand: Sparkfun
PCB edge mount Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. This is a standard edge connector. The thickness between pins is 0.063" so that it can slide sideways onto a PCB. See the mechanical drawing to create your footprint.
$5.05 AUD, inc GST

Vertical M.2 Expansion Support Case in Aluminum Alloy for LattePanda Sigma

Brand: DFRobot
The expandable Aluminum Alloy Vertical M.2 Expansion Support Case is designed for LattePanda Sigma, suitable for installing various non-standard M.2...
$69.35 AUD, inc GST

RF Explorer RFEM2.4G PLUS Expansion

Brand: Seeed Studio
RF Explorer RFEM2.4G PLUS is an expansion board compatible with RF Explorer WSUB1G PLUS models. It can be assembled in PLUS models only. This expansion board adds 2.4GHz band support, covering frequency ranges used by WiFi, Bluetooth, wireless video, ISM applications, etc.
$129.95 AUD, inc GST

SparkFun Digi XBee® Kit

Brand: Sparkfun
The SparkFun Digi XBee® Kit is your ticket to remote sensing adventures...
$294.95 AUD, inc GST

RF Explorer ISM Combo PLUS - Slim (Seeed Studio)

Brand: Seeed Studio
RF Explorer ISM COMBO+ is a powerful, high performance digital spectrum analyzer covering the 1GHz frequency range starting at 50KHz, and 2.35GHZ to 2.55GHz for scanning the popular 2.4GHz band.
$404.95 AUD, inc GST

RF Explorer - 3G Combo (Seeed Studio)

Brand: Seeed Studio
RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all popular frequency bands. It is based on a highly integrated...
$459.95 AUD, inc GST

RF Explorer 4G Combo PLUS - Slim (Seeed Studio)

Brand: Seeed Studio
RF Explorer 4G COMBO+ is a powerful Spectrum Analyzer, covering the full range starting at 50KHz up to 4GHz with no gaps or limitations. A future firmware license feature will allow it to expand the range up to 5.1GHz.
$529.95 AUD, inc GST

Aluminum Heatsink Case for LattePanda V1

Brand: DFRobot
This Aluminum Heatsink Case is an aluminum alloy enclosure made for the LattePanda V1 board. All-metal material with all black anodizing and sandblasting brings...
$65.30 AUD, inc GST
Similar matches

ESP32-S3 Mini Development Board

Brand: Waveshare
ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5...
$8.80 AUD, inc GST

Dual-Band USB WiFi Adapter for Raspberry Pi (5GHz/2.4GHz MT7612U)

Brand: The Pi Hut
This is a dual-band (5GHz/2.4GHz) 802.11 a/b/g/n/ac USB WiFi adapter for the Raspberry Pi, offering a fast secondary network option and AP mode for creating...
$33.85 AUD, inc GST

915MHz uFL antenna

Brand: Core Electronics

Keep your LoRa devices small using this FPCB antenna.

$2.30 AUD, inc GST

75 MHz to 1 GHz telescopic antenna

Brand: Great Scott Gadgets

Telescopic 50 ohm antenna with a range of 75 MHz to 1 GHz with SMA male connector, adjustable 20-88 cm length and rotating elbow for flexible placement.

$49.30 AUD, inc GST

micro:bit V2.2 Board

Brand: micro:bit
The micro:bit V2 has been designed from the ground up with education in mind. There are many onboard sensors and actuators, enabling exciting educational experiences with coding and electronics.
$24.15 AUD, inc GST

915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi

Brand: Sparkfun
A small ¼ wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA connector. Gain is...
$33.60 AUD, inc GST

915MHz LoRa Antenna RP-SMA - 1/2 Wave 2dBi

Brand: Sparkfun
Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and is 200mm long.
$37.05 AUD, inc GST

ESP32-S3-Pico Microcontroller (Pre-soldered headers)

Brand: Waveshare
ESP32-S3 Microcontroller with headers, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz…
$15.70 AUD, inc GST

5.8dBi Fiberglass Antenna - N-Type to RP-SMA - White - 902MHz-928MHz

Brand: RAKwireless

Omnidirectional 902-928 MHz dipole antenna provides 5.8 dBi gain and 360° coverage for LoRaWAN with weatherproof fibreglass housing and N-type connector.

$80.80 AUD, inc GST

M.2 (A+E Key) AX210 WiFi 6E Network Card (Compatible for LattePanda Delta/Alpha)

Brand: DFRobot
This Intel AX210NGW network card takes you into the Wi-Fi 6 era!Adopting the upcoming Wi-Fi 6E standard, the network card provides three-band (2.4GHz, 5GHz, and...
$63.80 AUD, inc GST

Simple Spring Antenna - 915MHz

Brand: Adafruit
This simple spring antenna matches great with any of our 900MHz RFM and LoRa breakouts, bonnets and Feathers. They're made of copper-clad wire so you can solder...
$1.95 AUD, inc GST

M5Stack ATOM Matrix ESP32 Development Kit

Brand: M5Stack
ATOM Matrix which has a size of only 24 * 24mm, is the most compact development board in the M5Stack development kit series. It provides more GPIO pins and is very suitable for handy and miniature embedded device development
$36.70 AUD, inc GST

Simple Spring Antenna - 433MHz

Brand: Adafruit
This simple spring antenna matches great with any of our 433MHz RFM and LoRa breakouts, bonnets and Feathers. They're made of copper-clad wire so you can solder...
$2.05 AUD, inc GST

TinyC6 (Onboard Antenna)

Brand: Unexpected Maker
Powerful and Tiny! Ideal for advanced IoT projects.
$28.48 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.