Search results for: '0.1 inch screw terminal'

50 results

2.54mm Pitch 4-Pin Screw Terminal Block

Brand: Core Electronics
Perfect for all Makers, these 4-Pin Screw Terminal Blocks allow you to secure a bunch of smaller wires.
$1.15 AUD, inc GST

Screw Terminal Block: 6-Pin, 0.1" Pitch, Side Entry

Brand: Pololu
This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...
$4.50 AUD, inc GST

Screw Terminals 2.54mm Pitch (2-Pin)

Brand: Sparkfun
These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.
$1.60 AUD, inc GST

Screw Terminal Block: 2-Pin, 0.1" Pitch, Side Entry (4-Pack)

Brand: Pololu
These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...
$5.90 AUD, inc GST

Screw Terminal Block: 8-Pin, 0.1" Pitch, Side Entry

Brand: Pololu
This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...
$5.90 AUD, inc GST

Screw Terminal Block: 3-Pin, 0.1" Pitch, Side Entry (3-Pack)

Brand: Pololu
These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...
$6.45 AUD, inc GST

Screw Terminal Block: 4-Pin, 0.1" Pitch, Side Entry (2-Pack)

Brand: Pololu
These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...
$5.95 AUD, inc GST

Screw Terminals 2.54mm Pitch (6-Pin)

Brand: Sparkfun
These are simple 6-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line...
$3.65 AUD, inc GST

Screw Terminal Block: 5-Pin, 0.1" Pitch, Side Entry (2-Pack)

Brand: Pololu
These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...
$7.30 AUD, inc GST

Feather 0.1 Pitch Terminal Blocks

Brand: Adafruit Feather
We've got a simple and highly functional solution to wiring your Adafruit Feather board! These 0.1" Pitch Terminal Blocks, are exactly the right size to it your...
$10.90 AUD, inc GST

Screw Terminal Block: 10-Pin, 0.1" Pitch, Side Entry

Brand: Pololu
This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...
$7.30 AUD, inc GST

Screw Terminal Block: 7-Pin, 0.1" Pitch, Side Entry

Brand: Pololu
This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...
$5.30 AUD, inc GST

Screw Terminal Block: 9-Pin, 0.1" Pitch, Side Entry

Brand: Pololu
This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...
$6.50 AUD, inc GST

Arduino Nano Screw Terminal Adapter

Brand: Arduino
Build robust projects with secure and long lasting connection without the need of any soldering combining the Nano Screw Terminal Adapter and any of the...
$24.75 AUD, inc GST

ACS71240KEXBLT-030B3 Current Sensor Carrier -30A to +30A, 3.3V

Brand: Pololu
This board is a simple carrier of Allegro’s ACS71240KEXBLT-030B3 Hall effect-based linear current sensor, which offers a low-resistance (~0.6 mO) current...
$8.85 AUD, inc GST

Screwless Terminal Block: 6-Pin, 0.1" Pitch, Side Entry (2-Pack)

Brand: Pololu
These side-entry screwless terminal blocks have a pitch of 0.1″ (2.54 mm). Each block has six spring terminals that automatically grip the stripped ends of inserted 26 – 18 AWG wires, allowing for easy, temporary connections to your PCB, and units can be combined to make longer blocks. They are rated for 150 V, 2 A (UL) and ship in packs of two.
$5.95 AUD, inc GST

General purpose terminal style screw driver, Pack of 10

Brand: Kitronik
This pack of general-purpose terminal style screwdrivers is perfect for working with boards/devices featuring terminal style connectors. Supplied as a...
$10.55 AUD, inc GST

Breakout for JST SH-Style Connector, 2-Pin Male Side-Entry (2-Pack)

Brand: Pololu
These simple boards serve as adapters between a JST SH-style 2-pin male connector and breadboard-compatible 0.1"-pitch through holes.
$2.90 AUD, inc GST

Screwless Terminal Block: 2-Pin, 0.1" Pitch, Side Entry (3-Pack)

Brand: Pololu
These side-entry screwless terminal blocks have a pitch of 0.1″ (2.54 mm). Each block has two spring terminals that automatically grip the stripped ends of inserted 26 – 18 AWG wires, allowing for easy, temporary connections to your PCB, and units can be combined to make longer blocks. They are rated for 150 V, 2 A (UL) and ship in packs of three.
$3.25 AUD, inc GST

Screwless Terminal Block: 5-Pin, 0.1" Pitch, Side Entry (2-Pack)

Brand: Pololu
These side-entry screwless terminal blocks have a pitch of 0.1″ (2.54 mm). Each block has five spring terminals that automatically grip the stripped ends of inserted 26 – 18 AWG wires, allowing for easy, temporary connections to your PCB, and units can be combined to make longer blocks. They are rated for 150 V, 2 A (UL) and ship in packs of two.
$5.40 AUD, inc GST

Screwless Terminal Block: 4-Pin, 0.1" Pitch, Side Entry (2-Pack)

Brand: Pololu
These side-entry screwless terminal blocks have a pitch of 0.1″ (2.54 mm). Each block has four spring terminals that automatically grip the stripped ends of inserted 26 – 18 AWG wires, allowing for easy, temporary connections to your PCB, and units can be combined to make longer blocks. They are rated for 150 V, 2 A (UL) and ship in packs of two.
$4.20 AUD, inc GST

Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Partial Kit)

Brand: Pololu
The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB along with two Omron G5LE-14-DC5 5 V relays, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relays are rated for up to 10 A under most conditions.
$25.45 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit)

Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC5 5 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.
$13.05 AUD, inc GST

ACS37030LLZATR-065B3 Current Sensor Large Carrier -65A to +65A, 3.3V

Brand: Pololu
This is the large version of a simple carrier for Allegro’s ACS37030LLZATR-065B3 electrically isolated current sensor that uses two signal paths—Hall...
$25.10 AUD, inc GST
Similar matches

5mm Pitch 2-Pin Screw Terminal Block

Brand: Core Electronics
Perfect for all Makers, these 2-Pin Screw Terminal Blocks allow you to secure a range of wire gauges.
$0.32 AUD, inc GST

5mm Pitch 3-Pin Screw Terminal Block

Brand: Core Electronics
Perfect for all Makers, these 3-Pin Screw Terminal Blocks allow you to secure a range of wire gauges.
$0.47 AUD, inc GST

Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)

Brand: Pololu
These side-entry screw terminal blocks have a pitch of 3.5 mm (0.138″). Each block has two terminals for the stripped ends of 24 – 18 AWG wires, and units can slide together to make longer strips. They are rated for 125 V, 10 A (UL) and ship in packs of four.
$3.20 AUD, inc GST

Screw Terminal Block: 2-Pin, 5 mm Pitch, Side Entry (4-Pack)

Brand: Pololu
These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has two terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They are rated for 250 V, 16 A (UL) and ship in packs of four.
$3.20 AUD, inc GST

MOSFET Module (Screw terminals)

Brand: Core Electronics

Keep your IO protected and drive high-power outputs.

$1.80 AUD, inc GST

USB 2.0 Type-C Connector Breakout Board (usb07b)

Brand: Pololu
This simple board breaks out the power, USB 2.0 data, configuration, and sideband pins of a USB Type-C connector to a 0.1" spacing that is compatible with ...
$6.65 AUD, inc GST

Screw Terminals 5mm Pitch (2-Pin)

Brand: Sparkfun
Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal can accept 26 to 14AWG wire. 5mm/197mil pin pitch will line up well with standard 0.1" perf boards but the pins are thick enough (1.0mm OD) that you may need to increase the hole diameter on some perf boards.
$1.90 AUD, inc GST

Screw Terminals 3.5mm Pitch (4-Pin)

Brand: Sparkfun
This is a Screw Terminal with 3.5mm pitch pins. Comes in 2, 3, or 4 positions and have the really cool feature of slide-locking together to form any size you need...
$2.85 AUD, inc GST

Screw Terminal Block: 2-Pin, 5 mm Pitch, Top Entry (4-Pack)

Brand: Pololu
These top-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has two terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They are rated for 250 V, 16 A (UL) and ship in packs of four.
$3.30 AUD, inc GST

Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled)

Brand: Pololu
The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 5 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC5 and are rated for up to 10 A under most conditions.
$27.40 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 5VDC Relay (Assembled)

Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 5 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.
$14.40 AUD, inc GST

Screw Terminals 3.5mm Pitch (3-Pin)

Brand: Sparkfun
Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to 20AWG wire. 3.5mm/138mil pin pitch will not fit standard 0.1" perf boards but this is the most common pitch screw terminal.
$2.20 AUD, inc GST

Screw Terminal Block: 3-Pin, 5 mm Pitch, Side Entry (4-Pack)

Brand: Pololu
These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has three terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They are rated for 250 V, 16 A (UL) and ship in packs of four.
$4.10 AUD, inc GST

SparkFun Qwiic 12 Bit ADC - 4 Channel (ADS1015)

Brand: Sparkfun
A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled...
$31.70 AUD, inc GST

Pololu Basic 2-Channel SPDT Relay Carrier with 12VDC Relays (Assembled)

Brand: Pololu
The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 12 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC12 and are rated for up to 10 A under most conditions.
$23.90 AUD, inc GST

Breakout for JST PH-Style Connector, 6-Pin Male Top-Entry, with SH

Brand: Pololu
This simple board serves as an adapter between a JST PH-style 6-pin, top-entry connector and breadboard-compatible 0.1"-pitch through holes. The PH...
$3.20 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.