Waveshare Jetson TX2 NX Development Kit

SKU: CE09208 Brand: Waveshare
NVIDIA Jetson TX2 NX delivers the next step in AI performance for entry-level embedded and edge products.
$819.11 AUD, inc GST
$744.65 AUD, exc GST

Available with a lead time
Expect dispatch between May 15 and May 21

Quantity Discounts:

  • 3+ $733.47 (exc GST)

Restrictions apply to this equipment as it uses button/coin cell batteries:

  • The equipment is intended to be used in trades, professions or industries
  • The equipment is not intended for sale to the general public
  • The equipment is not intended to be used where children are present
  • You are aware that this equipment may not meet child safety testing requirements as it is not intended to be used by consumers or general public, but rather, is intended to be used in trades, professions or industries in conjunction with the limitations and restrictions listed above
  • You are aware that these restrictions are due to a change in Australian legislation in 2022 for button/coin cell batteries

Button Battery Warning

A declaration of use will need to be submitted during checkout.

- +

0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

NVIDIA Jetson TX2 NX delivers the next step in AI performance for entry-level embedded and edge products. It provides 2.5X the performance of Jetson Nano, integrating NVIDIA Pascal architecture with 256 NVIDIA CUDA cores and the AI performance reaches up to 1.33 TFLOPs.

This kit includes a TX2 NX Module with onboard 16GB eMMC, which does not support a Micro SD card.

Note: Does not include a Power Supply 

Specifications

AI PERFORMANCE1.33 TFLOPS
GPUNVIDIA Pascal Architecture with 256 CUDA cores
CPUDual-core NVIDIA Denver 2 64-bit CPU and Quad-core Arm Cortex-A57 MPCore processor complex
MEMORY4 GB 128 bit LPDDR4 51.2 GB/s
STORAGE16 GB eMMC 5.1
POWER7.5 W | 15 W
PCIE1x1 + 1x2
PCIe Gen2, total 30 GT/s
CSIUp to 5 cameras (up to 12 via virtual channels)
12-Ch MIPI CSI-2 (3x4 or 5x2)
D-PHY 1.2 (up to 30 Gbps)
VIDEO ENCODE1x 4K60 | 3x 4K30 | 4x 1080p60 | 8x 1080p30 (H.265)
1x 4K60 | 3x 4K30 | 7x 1080p60 | 14x 1080p30 (H.264)
VIDEO DECODE2x 4K60 | 4x 4p30 | 7x 1080p60 | 14x 1080p30
(H.265 and H.264)
DISPLAY2 Multimode DP 1.2/eDP 1.4/HDMI 2.0
1 x 2 DSI (1.5Gbps/lane)
NETWORKING10/100/1000 BASE-T Ethernet
DIMENSIONS69.6 mm x 45 mm
260-pin SO-DIMM connector

 

Dimensions

This product is listed in:

Development Boards>Single Board Computers

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Raspberry Pi Microscope

The Raspberry Pi Microscope was put together to help with soldering PCBs that have small surface mo...
The Raspberry Pi Microscope was put together to help with soldering PCBs that have small surface mo...

Accurate IoT Clock With ESP8266

Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...
Being punctual is important. Hence accurate time is required. Clocks tend to miss out when it comes...

Days2Bin: Pico Powered Bin Reminder

Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...
Our recycle bin is collected fortnightly, but I can never remember which week, and the printed cale...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.