Search results for: 'smart home'

Learn

47 results

FireBeetle 2 ESP32-C5 Development Kit for Smart Home (2.4/5GHz Wi-Fi 6, Home Assistant, BLE 5, Zigbee, Thread)

Brand: DFRobot
FireBeetle 2 ESP32-C5 IO development expansion kit for smart home, perfect for building custom sensor nodes for Home Assistant via MQTT, Zigbee, or Matter...
$17.40 AUD, inc GST

Pico W Weather Station Starter Kit

Brand: Core Electronics

Build your own plug-and-play IoT weather station at home using the Pico W!

$56.25 AUD, inc GST

ACEBOTT Smart Home Kit for micro:bit

Brand: ACEBOTT

Get started with the micro:bit and sensors with this cute flatpack smart home kit!

$139.95 AUD, inc GST

Kitronik Smart Greenhouse Kit for the BBC micro:bit

Brand: Kitronik
Unlock the secrets of nature with code, engineering, and the Kitronik Smart Greenhouse Kit for BBC micro:bit!
$93.60 AUD, inc GST

micro:bit Smart Home Sensor Kit by ELECFREAKS

Brand: Elecfreaks
Explore smart home automation with the ELECFREAKS micro:bit Smart Life Kit, featuring integrated sensors for water, light, smoke, temperature, and humidity monitoring, plus servo motors and relays for hands-on STEM learning projects.
$118.65 AUD, inc GST

ACEBOTT Smart Home Starter Kit for ESP32

Brand: Core Electronics

Get started with the ESP32 and senors with this cute flatpack smart home kit!

 
$134.95 AUD, inc GST

ACEBOTT Smart Home Display kit

Brand: ACEBOTT

Run up to 8 kits at the same time with this Ultimate Smart Home kit!

$594.95 AUD, inc GST

ACEBOTT Smart Home Education Kit - Level 1 (3 in 1 Projects)

Brand: ACEBOTT

A replica smart home diorama and sensor kit where Makers can build and program: lighting, entertainment and temp/humidity using block-based, Python or Arduino coding - all with in-depth tutorials.

$189.95 AUD, inc GST

ACEBOTT Easy-Plug ESP32 Smart Home Starter Kit Wooden House IoT Wifi APP

Brand: ACEBOTT

Learn to build a voice- and app-controlled smart home with ESP32, RFID access, rain-sensing window closure and RGB lighting across 18 STEAM lessons.

$154.95 AUD, inc GST

Home Assistant Green

Brand: Home Assistant
Take your first step to upgrading your smart home with Home Assistant Green, the easiest way to start using Home Assistant. Home Assistant Green contains...
$269.95 AUD, inc GST

Adafruit FunHouse Starter Kit - IoT Home Automation Exploration - ADABOX018 Essentials

Brand: Adafruit
There's no place like home... and if you're like us you've spent a lot of time at home over the past year. It almost feels like a ...
$109.95 AUD, inc GST

Home Assistant Yellow Standard

Brand: Seeed Studio
The Home Assistant Yellow Kit with Power Supply is a smart home hub powered by Raspberry Pi CM4 that has over 2,500 built-in integrations and supports...
$414.95 AUD, inc GST

Arduino Opla IOT Kit

Brand: Arduino
Add smart technology to your home and workplace with the first Open programmable IoT platform that allows you to build custom IoT devices.
$254.95 AUD, inc GST

Adafruit FunHouse - WiFi Home Automation Development Board

Brand: Adafruit
Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland. Whether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when someone is detected in the kitchen, to sensing when a window was left open, or logging when your cat leaves through the pet door, this board is designed to make it way easy to make WiFi-connected home automation projects.
$61.65 AUD, inc GST

Remote Controlled Mains Outlet Controller (3 Pack)

The ultimate in convenience - turn any standard mains outlet on and off via remote! Great for switching off hard-to-reach power points too.
$61.20 AUD, inc GST

Remote Controlled Mains Outlet Controller

The ultimate in convenience - turn any standard mains outlet on and off via remote! Great for switching off hard-to-reach power points too. The remote has a range of up to 30m.
$26.80 AUD, inc GST

M5Stack M5GO IoT Starter Kit

Brand: M5Stack

This M5GO IOT Kit is a multi-Unit feast with 6 M5units inside (ENV III, IR, RGB, PIR, ANGLE, HUB). Just like other M5Stack development kits, the Core Module is powered by an ESP32.

$154.95 AUD, inc GST

Huzzah! Adafruit.io Internet of Things Feather ESP8266 - WiFi Starter Kit

Brand: Espressif ESP32 & ESP8266
OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with...
$69.50 AUD, inc GST

Nanoleaf Essentials Smart Bulb B22 (3 Pack)

Brand: Nanoleaf
A seamless introduction to smart lighting for a more connected world with tunable white and colour LED lighting.
$109.95 AUD, inc GST

Human Micro-Motion Detection mmWave Sensor

Brand: Waveshare
Human Micro-Motion Detection mmWave Sensor, 24GHz mmWave Radar, Based On S3KM1110, Adopts Frequency Modulated Continuous Wave (FMCW) Technology, Compact...
$4.70 AUD, inc GST

ESP32-S3-DevKitC-1 Development Board

Brand: DFRobot
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth® LE MCU module that...
$56.35 AUD, inc GST

PiicoDev Ambient Light Sensor VEML6030

Brand: PiicoDev
Measure the brightness of ambient light with a 16-bit sensor.
$9.35 AUD, inc GST

SX1262 LoRa HAT for Raspberry Pi (915MHz)

Brand: Waveshare

A LoRa expansion board for Raspberry Pi offers ultra-long-range wireless communication up to 5 km, wake-on-radio and UART control for DIY IoT applications.

$41.55 AUD, inc GST

3 Channel Relay Module Shield Smart Home for Raspberry Pi

Brand: Waveshare
Perfect for simple home-automation projects, this module allows your Raspberry Pi to control three independent relays, allowing you to easily control high-current loads while keeping your Pi safely isolated. All the necessary driver circuitry is on-board, and control is as simple as driving a GPIO pin high or low
$26.10 AUD, inc GST

Fermion: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)

Brand: DFRobot
BME688 sensor detects VOCs, temp, humidity, pressure. Supports Arduino/IoT via I2C/SPI. AI gas analysis for air quality & smart homes...
$24.49 AUD, inc GST

Fermion: AHT20 Temperature and Humidity Sensor (Breakout)

Brand: DFRobot
The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity...
$7.10 AUD, inc GST

Room Sensor Enclosure - Small Vented (Size 3)

Brand: The Pi Hut
The Room Sensor Enclosure (Size 3) is designed and manufactured for wall mounting applications such as air detectors, social distance monitoring, smart...
$5.95 AUD, inc GST

Gravity: SHT31-F Digital Temperature and Humidity Sensor

Brand: DFRobot
Gravity: SHT31-F digital temperature and humidity sensor is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated...
$16.17 AUD, inc GST

Home Assistant Connect ZBT-2

The Home Assistant Connect ZBT-2 makes it straightforward to get started with Zigbee or Thread with Home Assistant.

$104.95 AUD, inc GST

LoRaWAN ESP32-S3 Dev Board with Display for IoT Prototyping & Smart Home

Brand: DFRobot
DFRobot LoRaWAN ESP32 - S3 Development Board, which supports LoRa/LoRaWAN/Meshtastic protocols, is compatible with HomeAssistant and serves as a wireless...
$34.01 AUD, inc GST

Room Sensor Enclosure - Large Vented (Size 1)

Brand: The Pi Hut
The Room Sensor Enclosure (Size 1) is designed and manufactured for wall mounting applications such as air detectors, social distance monitoring, smart...
$10.10 AUD, inc GST

Fermion: SHTC3 Humidity & Temperature Sensor

Brand: DFRobot
The SHTC3 digital humidity sensor from Sensirion builds on the success of the proven SHTC1 sensor and offers consistent high accuracy within the measuring...
$9.36 AUD, inc GST

Arduino Plug and Make Kit

Brand: Arduino
Arduino from Zero to Hero! This is a beginner-friendly way to spark a passion in DIY electronics.
$174.95 AUD, inc GST

Intelligent Rain Detection Module

Brand: DFRobot
This smart rain sensor offers a fast way to detect rainfall change on glass in real time free from effects like sunlight, dust, leaves, etc., and feeds...
$44.01 AUD, inc GST

Self-powered Wireless Switch (BLE Beacon)

Brand: DFRobot
The battery-free, wire-free switch with BLE 5.3. Ideal for long-term monitoring of pressing and collision, offering a 40m remote control range at 2.4GHz...
$14.83 AUD, inc GST

Arduino Sensor Kit - Base

Brand: Arduino
Learn to Plug, Sketch and Play with basic Grove sensors, actuators and Arduino. All the modules are pre-wired on the PCB, just connect your Arduino Board to the Shield and start your measurements!
$72.55 AUD, inc GST

ELECFREAKS Smart Home Material Pack

Brand: Elecfreaks
The ELECFREAKS Smart Home Material Pack is a customized wooden accessory pack for Octopus sensors. It is designed with fixing holes reserved for IOT:bit,...
$16.87 AUD, inc GST

Wireless Sensor Node - Solar Kit (Seeed Studio)

Brand: Seeed Studio
Wireless Sensor Node - Solar Kit is an easy to use bundle created for experimenting with XBee and XBee compatible standalone wireless modules like RFBeeandWifi...
$56.45 AUD, inc GST

Gravity IoT Starter Kit for micro:bit

Brand: DFRobot
IoT Starter Kit is an all-in-one bundle for micro:bit beginners to fast experience and build Internet of Things projects. The kit comes with a micro:bit microcontroller...
$146.41 AUD, inc GST

Arduino IoT Bundle

Brand: Arduino
The Arduino IoT Bundle is the best way to start exploring the world of connected devices using the Arduino Nano RP2040 Connect. Follow the 5 step by step tutorials to quickly learn how to build IoT devices.
$159.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.