Search results for: 'screw nut kit'

This mounting kit provides you different types of screws and nuts which are most commonly used in DFRobot's projects here at DFRobot. We use them to mount circuit boards and help build robots.

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The...

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size...

Mount your KKSB cases securely with this black aluminum DIN rail mount clip, compatible with 35mm Top Hat Rails and featuring pre-drilled holes plus included mounting screws for easy installation.

This Dolly Kit is built specifically with V-Guide in mind. Four V-Groove Bearings get mounted on each side of the aluminum plates, and are properly spaced so that they align with V-Guide mounted inside of 1120 Series U-Channel.

This 210 piece brass standoff kit insures you'll always have a set handy...

The Computer Repair Screw and Standoff Kit contains all those bits and pieces that get lost whenever installing stuff into your computer or electronics...

Now you can mount and display your own Raspberry Pi stack for use as a server / cluster / processing farm.

The Tamiya 70121 Pulley Unit Set includes seven pulleys of various sizes, a motor, and mounting parts. This set can be combined with a variety of Tamiya products.

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting.

These aluminum gearmotor brackets let you securely mount Pololu's larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. These brackets are sold in pairs, and each bracket comes with two 1″ long and two 0.75″ long #2-56 screws for securing different size motors. Each bracket also features two mounting holes and one mounting slot intended for #4-size screws (not included).

Easily mount your Raspberry Pi to any 75mm and 100mm VESA mounts. This VESA mount is compatible with all the latest model boards (and most of the old ones)!

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at...

Totaling 420 pieces, this M3 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end!

The Tamiya 70156 Long Universal Arm Set can be used to make crank systems, link systems, and structures for your robot. The 41-hole arms consist of 3 mm holes spaced 5 mm apart making the arm set compatible with many Tamiya products and sets.

The Tamiya 70143 Universal Arm Set can be used to make crank systems, link systems, and structures for your robot. The 41-hole arms consist of 3 mm holes spaced 5 mm apart making the arm set compatible with many Tamiya products and sets.

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.

The metal heat case offers superior heat dissipation. Designed for the 4GB and 8GB Raspberry Pi 5 SBC. The kit includes an adjustable-speed fan and a...

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis.

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level robot chassis. This 10-pack of standoffs includes 10 sets screws and nuts for securing the top of the standoff to your project.

The Tamiya 70098 Universal Plate Set provides a reconfigurable platform for building your own robot chassis. The set comes with a plate with gridded mounting holes, angle brackets, and mounting hardware that lets you mount mechanical components in a variety of positions.

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation.

This hardware kit consists of 4 each of M2 style nylon hex nuts and screws. It is designed for use with the Leopard Imaging Camera, but can be used for other mountings...

This DF05BB Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot! Includes hardware and two DF05 ball bearing servos.

 

 

Here is the perfect hardware kit to make a RP2040 QT Trinkey into any kind of USB-connected smart sensor with a QT-sensor-sandwich! You can assemble...

Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs...

This VESA mount is specially designed for LattePanda or other SBC cases. It can be used with VESA compatible display and brackets to hide the LattePanda...

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for...

The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered...

Rack Tower stands for a new concept for the 4-layer acrylic case for the cluster. This 4-layer acrylic oversized fan enclosure is a new product designed to provide...

You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one one here!...

This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo motors. We recommend our small servo motors listed below.

This wall mounting bracket can be used to mount The Pi Hut's Raspberry Pi camera cases to a wall or bench!

This kit brings the excellent design and tutorials of Parallax to the Arduino world. Make your Arduino the onboard brain of a mobile robot and learn robotics, electronics...

Learn the basics of electronics by assembling manually your Arduino UNO, become familiar with soldering by mounting every single component, and then...

Here is the perfect kit with two faceplate options for your MagTag, including a vivid Red Arrow plate and a dreamy white Cloud plate. And of course, the mounting hardware is included, so you can assemble it with just a plain Phillips screwdriver. Takes less than 3 minutes!

The Kitronik :MOVE mini Mk2 buggy kit for the BBC micro:bit is a fun introduction to the world of robotics. Once built it can be coded for a variety of activities.

Here is a chic minimalist enclosure for your CLUE board! This case has been laser-cut specifically to accommodate the TFT display, tactile buttons, and capacitive pads.

The Tamiya 70171 3mm Threaded Shaft Set includes ball joints so you can make control rods with three-dimensional movement. The two threaded shafts are also useful for mounting pulleys.