Search results for: 'qwiic hub'
PiicoDev Splitter
Brand: PiicoDev
Split one PiicoDev Cable in three directions, or break out for soldered connections
$3.50 AUD, inc GST
Adafruit Qwiic / Stemma QT 5 Port Hub
Brand: Adafruit
Qwiic, or STEMMA QT, is a very efficient way to quickly prototype an idea, but a lot of Qwiic/Stemma QT driver boards only have one port, and devices have...
$4.95 AUD, inc GST
SparkFun Qwiic MultiPort
Brand: Sparkfun
Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to...
$4.30 AUD, inc GST
SparkFun Qwiic pHAT V2.0 for Raspberry Pi
Brand: Sparkfun
The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry...
$13.25 AUD, inc GST
SparkFun Qwiic Adapter
Brand: Sparkfun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors...
$2.75 AUD, inc GST
WisBlock QWIIC Module RAK13009
Brand: RAKwireless
Connect QWIIC, STEMMA QT and PiicoDev modules to WisBlock in a sensor slot using a compact JST-SH interface for flexible IoT prototyping.
$4.95 AUD, inc GST
SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)
Brand: Adafruit
The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with...
$13.55 AUD, inc GST
Similar matches
PiicoDev Cable 100mm
Brand: PiicoDev
This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.85 AUD, inc GST
PiicoDev Cable Expansion Kit
Brand: PiicoDev
Top up your PiicoDev Starter kit with a range of the most used cables!
$12.76 AUD, inc GST
SparkFun Qwiic Shield for Teensy - Extended
Brand: Sparkfun
The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield...
$8.50 AUD, inc GST
SparkFun Qwiic Shield for Arduino
Brand: Sparkfun
The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield...
$14.05 AUD, inc GST
SparkFun Qwiic Starter Kit for Raspberry Pi V2
Brand: Sparkfun
The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables to help make I2C easier!...
$119.95 AUD, inc GST
Qwiic USB Development Kit - SAMD21
Brand: Sparkfun
A USB development board for the SparkFun Qwiic system...
$45.65 AUD, inc GST
SparkFun Qwiic Shield for Thing Plus
Brand: Sparkfun
The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards...
$9.65 AUD, inc GST
SparkFun Qwiic Shield for Teensy
Brand: Sparkfun
The SparkFun Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized...
$7.35 AUD, inc GST
PiicoDev Adapter for Breadboards
Brand: PiicoDev
The PiicoDev® Adapter for Breadboards allows you to break-out the 4-wires in a PiicoDev cable for prototyping on a breadboard.
$1.65 AUD, inc GST
PiicoDev Adapter for Raspberry Pi
Brand: PiicoDev
The PiicoDev® Adapter for Raspberry Pi is a great way to connect sensors to your Raspberry Pi without soldering.
$4.05 AUD, inc GST
Flexible Qwiic Cable - 100mm
Brand: Sparkfun
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$3.80 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
Brand: Adafruit
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead...
$1.85 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long
Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with...
$1.95 AUD, inc GST
JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long
Brand: Adafruit
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared...
$1.95 AUD, inc GST
JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long
Brand: Adafruit
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch...
$1.90 AUD, inc GST
Qwiic Cable - Grove Adapter (150mm)
Brand: Sparkfun
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that...
$4.15 AUD, inc GST
Flexible Qwiic Cable - 50mm
Brand: Sparkfun
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$2.75 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
Brand: Adafruit
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm...
$2.55 AUD, inc GST
Flexible Qwiic Cable - 500mm
Brand: Sparkfun
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$5.80 AUD, inc GST
PiicoDev Adapter for Micro:bit
Brand: PiicoDev
Connect your Micro:bit with the outside world using PiicoDev® Adapter for Micro:bit. With this adapter you can experiment with sensors from the PiicoDev range giving your Micro:bit new sensing abilities.
$13.20 AUD, inc GST
Flexible Qwiic Cable - 200mm
Brand: Sparkfun
This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications...
$4.05 AUD, inc GST
SparkFun Qwiic SHIM for Raspberry Pi
Brand: Sparkfun
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you...
$3.30 AUD, inc GST
Adafruit Qwiic / Stemma QT Breakout Board
Brand: Adafruit
We got a request from a customer for a board that makes connecting between a breadboard and Stemma QT or Qwiic components easy, and here's what we...
$3.80 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long
Brand: Adafruit
This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$3.25 AUD, inc GST
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
Brand: Adafruit
This 4-wire cable is a little over 300mm / 11.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH...
$2.80 AUD, inc GST
SparkFun QwiicBus - EndPoint
Brand: Sparkfun
The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts...
$24.90 AUD, inc GST
SparkFun Qwiic HAT for Raspberry Pi
Brand: Sparkfun
The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve...
$11.20 AUD, inc GST
SparkFun Qwiic GPIO
Brand: Sparkfun
Do you find yourself wishing that you had just a few more GPIO pins? What if you only need that one more pin? You could add another microcontroller to your project...
$11.70 AUD, inc GST
SparkFun Qwiic Pocket Development Board - ESP32-C6
Brand: Sparkfun
The SparkFun ESP32-C6 Pocket Dev Board is built around a RISC-V single-core processor with 4 MB flash memory in a 1"x1" Qwiic Standard Footprint!...
$37.05 AUD, inc GST
SparkFun 9DoF IMU Breakout - ISM330DHCX, MMC5983MA (Qwiic)
Brand: Sparkfun
The SparkFun 9DoF IMU Breakout combines a high-performance 6DoF IMU with the highly sensitive triple-axis magnetometer in a Qwiic breakout board...
$83.70 AUD, inc GST
SparkFun Qwiic Pro Micro - USB-C (ATmega32U4)
Brand: Sparkfun
Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The SparkFun Qwiic...
$46.45 AUD, inc GST
SparkFun Qwiic Directional Pad
Brand: Sparkfun
The SparkFun Qwiic Directional Pad adds a 5-way directional pad to your I2C bus!...
$13.85 AUD, inc GST
SparkFun Qwiic Button - Green LED
Brand: Sparkfun
Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The...
$10.05 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.