SparkFun Qwiic Starter Kit for Raspberry Pi V2

SKU: KIT-21285 Brand: Sparkfun

The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables to help make I2C easier!...

$114.95 AUD, inc GST

$104.50 AUD, exc GST

Quantity Discounts:

5-10 $101.36 (exc GST)
10+ $99.27 (exc GST)

Out of Stock

Ready to get started with Raspberry Pi and Qwiic? The SparkFun Qwiic Starter Kit for Raspberry Pi includes the SparkFun Qwiic pHAT v2.0 for Raspberry Pi, which adds four Qwiic connectors to your Pi. It also includes four Qwiic-enabled boards: SparkFun VCNL4040 Proximity Sensor Breakout, SparkFun Micro OLED Breakout, SparkFun BME280 Atmospheric Sensor Breakout, and SparkFun SGP40 Air Quality Sensor. Sparkfun have also included plenty of Qwiic Cables to connect everything together!

Take sensor readings from each Qwiic-enabled board using Python to measure proximity, ambient light, barometric pressure, humidity, temperature, and VOC Index. Then output the data through the Micro OLED display or a monitor using the serial terminal. Better yet, make an Internet of Things (IoT) project by displaying the sensor data on a custom dashboard using Cayenne!

The Qwiic system makes I²C on your Raspberry Pi a breeze. All you need is a Raspberry Pi with a 2x20 GPIO header to plug the HAT into. This kit can also be used with the NVIDIA Jetson Nano Developer Kit and Google Coral Development Board, since they utilize the same 2x20 GPIO header! Make sure to check the Includes Tab to see everything that comes in the box!

The SparkFun Qwiic Connect System is an ecosystem of I²C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

Get Started With the SparkFun Qwiic Kit for Raspberry Pi V2 Guide

Includes

Revision Changes: With this revision of the SparkFun Qwiic Starter Kit for Raspberry Pi V2, Sparkfun have replaced the following breakout board, listed below. If users are unsure about which version they purchased, please refer to the product images or the hookup guide.

The SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic) has been replaced with the SparkFun Air Quality Sensor - SGP40 (Qwiic). Sparkfun still include the BME280 as a separate breakout board. Note that the SGP40 measures the VOC index as opposed to the CCS811 which measured the tVOC and eCO₂.

Features

Feature Changes: The SGP40 measures the VOC index as opposed to the CCS811 which measured the tVOC and eCO2 in the previous kit. For more information, check out the hookup guide.

Documents

Qwiic Kit for Raspberry Pi V2 Hookup Guide
Supplemental Hookup Guides
GitHub
- Python Modules (i.e. Libraries)
- Python Demo Code
Qwiic Info Page
Raspberry Pi Resource Page

This product is listed in:

Sensors>Kits

Product Comments

Start the conversation

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review