Search results for: 'port expander'

50 results

Adafruit MCP23017 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
We’ve gotten a lot of requests for a MCP23017 breakout and we’ve always sorta been like “ehh why not just use the DIP chip?” but...
$11.25 AUD, inc GST

MCP23017 IO Expansion Board, Expands 16 I/O Pins

Brand: Waveshare
The MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V levels.
$10.90 AUD, inc GST

Gravity: MCP23017 IIC 16 Digital IO Expansion Module

Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module...
$9.93 AUD, inc GST

Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up it's sleeve.
$9.70 AUD, inc GST

Sensor:bit IO extension board for micro:bit

Brand: Elecfreaks
Sensor:bit is a breakout board based on micro:bit. It has extended all available IO ports on micro:bit, and lead out them in the form of GVS. With this board, we can extend various 3V electric brick modules like LED light, photocell, etc.. On the board, it has integrated a buzzer and an audio jack, which allows us to hear music from the buzzer or with our headphone.
$13.23 AUD, inc GST

MCP23017 - i2c 16 input/output port expander

Brand: Adafruit
Add another 16 pins to your microcontroller using a MCP23017 port expander. The MCP23017 uses two i2c pins (these can be shared with other i2c devices), and in exchange...
$13.60 AUD, inc GST

MCP23008 - i2c 8 input/output port expander

Brand: Adafruit
Add another 8 pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two i2c pins (these can be shared with other i2c devices), and in exchange...
$3.95 AUD, inc GST

I/O Expander - MCP23008

Brand: SparkFun
Add another eight pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two I2C pins which can be shared with other I2C devices, and in...
$3.70 AUD, inc GST

SparkFun 16 Output I/O Expander Breakout - SX1509

Brand: SparkFun

The SX1509 Breakout is a 16-channel GPIO expander that adds fully configurable digital I/O to your microcontroller using just two I2C wires. It also handles PWM for LED dimming, can blink or breathe pins, and has a built-in keypad engine for up to 64 buttons.

$13.35 AUD, inc GST

Adafruit PCF8575 I2C 16 GPIO Expander Breakout - STEMMA QT / Qwiic

Brand: Adafruit
Expand your project possibilities, with the Adafruit PCF8575 GPIO Expander Breakout - an affordable 16 channel I2C expander.GPIO expanders work like this:...
$10.70 AUD, inc GST

Adafruit GPIO Expander Bonnet - 16 Additional I/O over I2C

Brand: Adafruit
The Raspberry Pi is an amazing single board computer - and one of the best parts is that GPIO connector! 40 pins of digital goodness you can twiddle to control LEDs...
$18.25 AUD, inc GST

Pimoroni IO Expander Breakout

Brand: Pimoroni
Add oodles of extra analog-friendly input and output pins to your Raspberry Pi project!
$16.45 AUD, inc GST

Seeeduino XIAO Expansion board

Brand: Seeed Studio
A functional expansion board for Seeeduino XIAO of only half Raspberry Pi 4 size. With OLED display, embedded RTC, expandable memory mini SD card slot,...
$28.45 AUD, inc GST

RS485 Expansion HAT for Raspberry Pi - 2-Channel Isolated

Brand: Waveshare
This is a 2-channel isolated RS485 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3485 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.
$31.85 AUD, inc GST

Pimoroni Pico Omnibus (Dual Expander)

Brand: Pimoroni
Double up your GPIO pins and attach two add-ons to a single Raspberry Pi Pico with our expansive Pico Omnibus!
$21.55 AUD, inc GST

2-Channel Isolated RS232 Expansion HAT

Brand: Waveshare
2-Channel Isolated RS232 Expansion HAT for Raspberry Pi, SC16IS752+SP3232 Solution, with Multi Onboard Protection Circuits
$26.55 AUD, inc GST

Micro:bit Driver Expansion Board

Brand: DFRobot
Since the advent of micro:bit, its simple and practical way of programming is widely loved by makers, students and teachers. Its sample design, coupled with a wealth...
$21.33 AUD, inc GST

Gravity: IIC to Dual UART Module

Brand: DFRobot
This IIC to Dual UART module offers data transmission rate up to 1Mbps, and each sub UART has independent 256-byte FIFO hardware buffer for transmitting and receiving. The baud rate, word length, and check format of every sub UART can be set independently.
$13.16 AUD, inc GST

IO Expansion Hat for Raspberry Pi 3/4/400

Brand: DFRobot
When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi...
$8.77 AUD, inc GST

IO Expansion HAT for Raspberry Pi 4B/3B+

Brand: DFRobot
This IO Expansion HAT from DFRobot is the perfect companion for your Raspberry Pi 4B/3B+! It leads out all of the IO ports on Raspberry Pi including digital port...
$15.67 AUD, inc GST

Dual-channel RS485 Expansion Hat for Raspberry Pi 4B

Brand: DFRobot
Want to increase reliability and anti-interference for data transmission in your industrial applications? Try the RS485 Expansion HAT for Raspberry Pi....
$49.15 AUD, inc GST

Serial Expansion HAT for Raspberry Pi

Brand: Waveshare
Serial Expansion HAT for Raspberry Pi, I2C Interface, 2-ch UART, 8 GPIOs
$21.35 AUD, inc GST

Expander Pi

Brand: AB Electronics
Expander Pi is a versatile digital and analogue expansion board. It allows you to connect your Raspberry Pi to switches, lights, sensors, and many other devices giving you a way to communicate with the outside world.
$46.50 AUD, inc GST

Gravity: I/O Expansion Shield for Pyboard

Brand: DFRobot
Gravity: I/O Expansion Shield for pyboard is an multifunctional expansion shield specially designed for pyboard v1.1. It is compatible with various sensors and electronic...
$6.59 AUD, inc GST

Multi Function Expansion Board for UNIHIKER K10 and micro:bit (Power & Motion)

Brand: DFRobot
Power up UNIHIKER or micro:bit projects with this all-in-one expansion board. Drive 4 DC motors & 6 servos, and add portable power with its 18650 battery...
$27.56 AUD, inc GST

Wio Terminal Chassis - Battery (650mAh)

Brand: Seeed Studio
The Wio Terminal Battery Chassis is a must-have extension board for Wio-Terminal Dev Board as it provides an external power source for Wio Terminal to...
$44.20 AUD, inc GST

Xia mi Multi-functional Expansion Board for BBC micro:bit V2

Brand: DFRobot
This is a micro:bit V2-based multi-functional expansion board for programming education. Featuring a small size of 57*87mm and a compact layout, the board ...
$56.13 AUD, inc GST
Similar matches

PiicoDev Cable Expansion Kit

Brand: PiicoDev

Top up your PiicoDev Starter kit with a range of the most used cables!

$12.76 AUD, inc GST

PiicoDev Adapter for Breadboards

Brand: PiicoDev
The PiicoDev® Adapter for Breadboards allows you to break-out the 4-wires in a PiicoDev cable for prototyping on a breadboard.
$1.65 AUD, inc GST

Raspberry Pi USB 3.0 Hub

Brand: Raspberry Pi

Need more USB ports? This handy accessory turns one USB-A port into four!

$21.29 AUD, inc GST

PiicoDev Expansion Board for Pico (Non-Recharging)

Brand: PiicoDev

Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.90 AUD, inc GST

2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi

Brand: Waveshare
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, Dual Chips Solution, Stackable Design For Expanding Multiple CAN Channels, Built-In Multi...
$41.25 AUD, inc GST

2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution

Brand: Waveshare
2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits...
$33.95 AUD, inc GST

Adafruit CH334F Mini 2-Port USB Hub Breakout

Brand: Adafruit

Sometimes, you've got something with a USB host, like an embedded Linux board, and you want...

$8.95 AUD, inc GST

ESP32 Servo Driver Expansion Board

Brand: Waveshare
ESP32 Servo Driver Expansion Board, Built-In WiFi And Bluetooth...
$26.50 AUD, inc GST

4 Port USB HUB HAT for Raspberry Pi

Brand: Waveshare
4 Port USB HUB HAT for Raspberry Pi, USB to UART Onboard...
$14.75 AUD, inc GST

USB Mini Hub with Power Switch

Brand: Adafruit
Do you want your cup to runneth over with USB ports? Do you want it to also be filled with the sweet, sweet nectar of an on-off switch? If the answer to either of...
$10.90 AUD, inc GST

Argon ONE M.2 Expansion Board

Brand: Argon40
Argon ONE M.2 Expansion Board extends support for M.2 SATA SSDs to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD Card.
$40.55 AUD, inc GST

SparkFun Qwiic MultiPort

Brand: SparkFun
Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to...
$4.30 AUD, inc GST

GPIO Multi-Function Expansion Board (Pi 4B/3B/3B+)

Brand: Core Electronics

This handy HAT sits right on the top of your Pi, and will break out the 40-Pin header on your Raspberry Pi 3B, 3B+ and 4B into 3 banks of pins, and adjacent pins to these connect to screwless spring terminals on the outside of the board.

$6.10 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.