Search results for: 'pluggable terminal block'

Perfect for all Makers, these 2-Pin Screw Terminal Blocks allow you to secure a range of wire gauges.

Perfect for all Makers, these 4-Pin Screw Terminal Blocks allow you to secure a bunch of smaller wires.

Perfect for all Makers, these 3-Pin Screw Terminal Blocks allow you to secure a range of wire gauges.

The shield adopts terminal blocks to secure wires so as to make connections stable and reliable. And multiple 3.3V, 5V and GND ports are provided for easy...

This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...

These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...

This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi with no soldering or breadboarding! This HAT has screw-terminals for each...

This Ethernet RJ45 Female Plug to 8-PinTerminal Block consists of a standard RJ45 Ethernet port and a terminal block, which can be used without soldering...

One truth about working with test equipment is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block BNC (Bayonet...

These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has two terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They are rated for 250 V, 16 A (UL) and ship in packs of four.

One truth about working with test equipment is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block BNC (Bayonet...

These side-entry screw terminal blocks have a pitch of 3.5 mm (0.138″). Each block has two terminals for the stripped ends of 24 – 18 AWG wires, and units can slide together to make longer strips. They are rated for 125 V, 10 A (UL) and ship in packs of four.

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Block Breakout. You get a nice solid PCB with an DE-9 socket and...

The shield adopts terminal blocks to secure wires so as to make connections stable and reliable. And multiple 3.3V, 5V and GND ports are provided for easy...

This connector adapts a 5.5 × 2.1 mm DC barrel plug to a pair of screw terminals. The terminals are labeled positive and negative, with the positive terminal connected to the center contact.

his is the USB-A Male Plug to 5-pin Terminal Block. If you need to connect to a device with a USB Jack, maybe make your own USB stick or custom cable of sorts -...

Make your own custom HDMI cable or HDMI interface with ease, using this HDMI Terminal Block Breakout. You get a nice solid PCB with an HDMI plug and two strips of...

These side-entry screwless terminal blocks have a pitch of 0.1″ (2.54 mm). Each block has six spring terminals that automatically grip the stripped ends of inserted 26 – 18 AWG wires, allowing for easy, temporary connections to your PCB, and units can be combined to make longer blocks. They are rated for 150 V, 2 A (UL) and ship in packs of two.

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block audio connectors...

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block audio connectors...

Make your own custom DE-15 cable or DE-15 interface with ease, using this DE-15 Plug to Terminal Block Breakout. You get a nice solid PCB with a DE-15 plug and two...

If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet socket - this adapter will come in very handy!

These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...

These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...

These side-entry screw terminal blocks have a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many...

These top-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has two terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They are rated for 250 V, 16 A (UL) and ship in packs of four.

This 4-Port RS485 bus split hub is specially designed to meet the requirements of RS485 large-scale systems in complex electromagnetic environments. Its transmission...

This expansion shield for FireBeetle 2 has an additional 7-24V external voltage input and GDI, and adopts terminal blocks to secure wires so as to make...

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why Adafruit love these terminal-block audio connectors...

After a long day out harvesting in the terminal block fields, Adafruit have returned with a veritable bounty of these very nice and compact 2.54mm/0.1" terminal blocks in a variety of sizes

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect...

This Ethernet RJ45 Male Plug to 8-PinTerminal Block consists of a standard RJ45 Ethernet port and a terminal block, which can be used without soldering....

After a long day out harvesting in the terminal block fields, Adafruit have returned with a veritable bounty of these very nice and compact 2.54mm/0.1" terminal blocks in a variety of sizes

After a long day out harvesting in the terminal block fields, Adafruit have returned with a veritable bounty of these very nice and compact 2.54mm/0.1" terminal blocks in a variety of sizes

This side-entry screw terminal block has a pitch of 0.1" (2.54 mm), and can be used as alternatives to standard 0.1" male or female headers on many PCBs...

We've got a simple and highly functional solution to wiring your Adafruit Feather board! These 0.1" Pitch Terminal Blocks, are exactly the right size to it your...