Search results for: 'milling'

47 results

Makera Spiral 'O' Single Flute Bit for Metal - 2mm x 8mm - 1/8" Shank

Brand: Makera

A single, sharp carbide edge that clears chips fast, for clean and detailed cuts in aluminium, brass and more.

$15.00 AUD, inc GST

Essential Milling Bit Set - 26pcs

Brand: Makera

One of every bit you'll reach for on a desktop CNC - for roughing, finishing, drilling, engraving, chamfering, and threading in soft metals, wood and plastics.

$246.00 AUD, inc GST

4th-Axis Module for Carvera Air

Brand: Makera

Add a Rotary 4th-axis for the Carvera Air CNC with harmonic drive precision, simultaneous 4-axis machining, auto probing integration, Fusion 360 and VCarve support.

$834.00 AUD, inc GST

Carbide PCB Drill Bit - 0.7mm

Brand: Adafruit
If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to pattern out traces...
$4.60 AUD, inc GST

Essential Milling Bit Set - Extended 52pcs

Brand: Makera

3.175 mm shank CNC bit set for metals, wood and plastics. The wide offering lets you thread, rough, finish, chamfer, and engrave.

$478.79 AUD, inc GST

Carbide Square End Mill - 1/8 Shaft - 0.5mm Diameter

Brand: Adafruit
If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC mill that can route out PCBs by cutting...
$7.85 AUD, inc GST

Service - PCB Milling - 1 Layer <10cm x 12cm

Brand: Core Electronics
Requirements apply, view this service by clicking on the title.
$48.95 AUD, inc GST

Carbide Square End Mill - 1/8 Shaft - 0.6mm Diameter

Brand: Adafruit
If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC mill that can route out PCBs by cutting...
$7.15 AUD, inc GST

Carbide Square End Mill - 1/8 Shaft - 0.7mm Diameter

Brand: Adafruit
If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC mill that can route out PCBs by cutting...
$7.10 AUD, inc GST

Carbide Square End Mill - 1/8 Shaft - 0.8mm Diameter

Brand: Adafruit
If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC mill that can route out PCBs by cutting...
$7.75 AUD, inc GST

Makera TiN-Coated Corn Bit - 1mm x 7mm - 1/8" Shank (10 Pack)

Brand: Makera

Shred clean edges through FR-4, fibreglass and carbon fibre - ten fine-profile carbide bits made for desktop CNCing.

$30.77 AUD, inc GST

TiN-Coated Drill Bit - 2.5mm x 12mm - 1/8" Shank (10 Pack)

Brand: Makera

Hard-wearing carbide drills sized at 2.5 mm - a ten-pack for desktop CNC work in plastic, timber, non-ferrous metals and composites.

$27.92 AUD, inc GST

Carbide PCB Drill Bit - 0.9mm

Brand: Adafruit
If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to pattern out traces...
$4.15 AUD, inc GST

Carbide PCB Drill Bit - 1.1mm

Brand: Adafruit
If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to pattern out traces...
$4.50 AUD, inc GST

Carbide PCB Drill Bit - 0.5mm

Brand: Adafruit
If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may start out with an etching system to pattern out traces...
$4.20 AUD, inc GST

Carvera Air Spoil Board (5pcs)

Brand: Makera

Protect your Carvera Air workspace from tool damage while maintaining precision with this 5-pack of 2mm Spoil Boards.

$31.30 AUD, inc GST

Makera Cyclone Dust Collector

Brand: Makera

Engineered for maximum dust collection using cyclone separation and three-stage filtration, with programmable G-code start/stop for desktop CNCs.

$1129.95 AUD, inc GST

Aluminium Plate (5mm x 100mm x 150mm)

Brand: Makera

Machine professional metal parts and prototypes. Sized for desktop CNC's base plates.

$8.32 AUD, inc GST

Carvera - Desktop CNC Machine

Brand: Makera

A compact desktop CNC with auto tool changer, probe and built-in dust extraction and laser; optional 4th axis. Made for precision milling for aluminium, wood, plastics and much more.

$10651.24 AUD, inc GST

Carvera Air - Desktop CNC Machine

Brand: Makera

A compact, more customisable desktop CNC with a quick tool-changer, probe and a range of optional accessories, such as an external dust collection unit, a 5W laser and a rotary 4th axis.

$4761.00 AUD, inc GST

Black Delrin Plate (5mm x 100mm x 150mm)

Brand: Makera

A high-strength, low-friction engineering plastic known for its excellent rigidity and dimensional stability, perfect for milling.

$5.85 AUD, inc GST

Single-Sided PCB Blank (150x200mm)

Brand: Makera

Rapidly prototype custom circuits by milling traces and through-holes on your CNC mill. The 1.5mm thick FR4 substrate provides a rigid, stable base with copper cladding optimised for desktop CNC isolation routing.

$3.15 AUD, inc GST

Spindle Collet for Carvera and Carvera Air (6.35mm / 1/4in)

Brand: Makera

Run 6.35mm (1/4in) shank end mills on your Carvera or Carvera Air for stiffer cuts and access to a far bigger tooling library.

$83.95 AUD, inc GST

Double-Sided PCB Blank (150x200mm)

Brand: Makera

Rapidly prototype custom circuits by milling traces and through-holes on your CNC mill. The 1.5mm thick FR4 substrate provides a rigid, stable base with double-sided copper cladding optimised for desktop CNC isolation routing.

$3.35 AUD, inc GST

Polycarbonate Sheet (3mm x 150mm x 200mm)

Brand: Makera

Fabricate shatter-resistant parts and clear mechanical assemblies. Pre-cut to 150mm x 200mm, this industrial-grade substrate provides 200 times the impact strength of glass for any project.

$15.66 AUD, inc GST

4th-Axis Module for Carvera

Brand: Makera

Unlock the Rotational 4th axis for the Carvera CNC, featuring harmonic drive precision, allowing simultaneous 4-axis machining.

$995.54 AUD, inc GST

1603 Series Face Thru-Hole Pillow Block (10mm Bore)

Brand: goBILDA
A 10mm Bore 1603 Series Face Thru-Hole Pillow Block
$11.80 AUD, inc GST

Abrasive Pad for PCB Milling

Brand: Bantam Tools
This cleaning pad has just the right amount of abrasion for cleaning your PCB board after milling. We have testest this scouring pad extensively with our Bantam Milling Machine finding it to clean away any burr's whilst leaving the copper board with a smooth finish with no scratch marks.
$3.25 AUD, inc GST

xTool CNC Cutting Slats (5pcs)

Brand: xTool

Spare metal supports for the MetalFab CNC cutter's bed. Keeps thin sheet flat and vibration-free for cleaner cut edges.

$196.90 AUD, inc GST

Epoxy Block (50mm x 50mm x 200mm)

Brand: Makera

A homogeneous block of solid epoxy - a great prototyping material that can be used in lots of projects.

$22.45 AUD, inc GST

Carbon Fibre Sheet (2mm x 200mm x 250mm)

Brand: Makera

Thin, rigid woven composite for milling lightweight drone arms, covers and sensor mounts on your desktop CNC.

$32.58 AUD, inc GST

Carbon Fibre Sheet (4mm x 200mm x 250mm)

Brand: Makera

Mill your own drone frames, chassis plates and brackets from real woven composite — stiff, light, and it looks the part.

$57.00 AUD, inc GST

Aluminium Block (35x35x100mm)

Brand: Makera

Machine professional metal parts and prototypes. Sized for desktop CNC's base plates and rotary modules.

$18.60 AUD, inc GST

Epoxy Board (20mm x 150mm x 200mm)

Brand: Makera

A homogeneous block of solid epoxy - a great prototyping material that can be used in lots of projects.

$24.66 AUD, inc GST

CNC Rotary Encoder - 100 Pulses per Rotation - 60mm Silver

Brand: Adafruit
We have various PCB-mount rotary encoders in the shop, great for making interfaces where you may want to spin a knob around to select a value. These large...
$49.70 AUD, inc GST
Similar matches

Aluminium Plate (3mm x100mm x150mm)

Brand: Makera

Machine professional metal parts and prototypes. Sized for desktop CNC's base plates.

$10.50 AUD, inc GST

Clear Acrylic Case for Raspberry Pi 5

Brand: Waveshare
Clear Acrylic Case for Raspberry Pi 5, Supports installing Official Active Cooler...
$9.70 AUD, inc GST

Aluminium Block (50mm x 50mm x 100mm)

Brand: Makera

Machine professional metal parts and prototypes. Sized for desktop CNC's beds.

$15.78 AUD, inc GST

Double-Sided PCB Blank (100x150mm)

Brand: Makera

Rapidly prototype custom circuits by milling traces and through-holes on your CNC mill. The 1.5mm thick FR4 substrate provides a rigid, stable base with copper cladding optimised for desktop CNC isolation routing.

$2.50 AUD, inc GST

Dual Fan Case for Raspberry Pi 5

Brand: Core Electronics

Keep your Pi 5 cool, good-looking and protected with this dual-fan case!

$24.45 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.