Search results for: 'metal gear micro servo'
FS90MG 2.2kg Metal Gear Micro Servo
Brand: Feetech
Squeeze more torque out of the micro servo form-factor!
$7.40 AUD, inc GST
FS90MR 1.8kg Metal Gear Continuous Rotation Micro Servo
Brand: Feetech
Add some more power to the small form-factor-continuous rotation servo with this all metal upgrade
$8.65 AUD, inc GST
9025MG Metal Gear Servo (2.5kg)
Brand: DFRobot
Small, lightweight metal gear servo with 2.5kg torque, suitable for medium electric models and mini robots. Operates at 4.8-6V, weighs 14.7g.
$16.45 AUD, inc GST
High Torque Waterproof Metal Gear Digital Servo (20KG, 180°, IP54)
Brand: DFRobot
The water-resistant digital servo offering 20kg torque, 180-degree control, and enhanced linear motion. Features copper gears, dual ball bearings,...
$27.05 AUD, inc GST
Micro Servo - MG90D High Torque Metal Gear
Brand: Adafruit
Add more power to your robot with this metal-geared MG90D servo (the upgrade to the MG90S). The tiny little servo can rotate approximately 90 degrees (45 in each direction)
$19.50 AUD, inc GST
9g Metal Gear Micro Servo (1.8Kg )
Brand: DFRobot
Do you need a servo for a tiny little project? Or are you seeking for an affordable solution? This mini metal servo is quite impressive, it does quite the job for a large range of tasks. With metal gear, it could gives you a 1.8kg*cm torque. Pretty strong regarding its size. Suitable for Beam robots and other automation tasks. Keep in mind that if you need some heavy lifting you should be considering some of our other options. This servo is for you if you are planning on building smaller size robots.
$10.50 AUD, inc GST
Micro Servo - High Powered, High Torque Metal Gear
Brand: Adafruit
Add even more power to your robot with this metal-geared servo. The tiny little servo can rotate approximately 180 degrees (~90 in each direction), and works just...
$27.20 AUD, inc GST
Analog Feedback Micro Servo - Metal Gear
Brand: Adafruit
It looks like a micro servo, it acts like a micro servo, but it's more than just a micro servo! Adafruit got a factory to custom-make these quality metal-geared 'micro'...
$26.90 AUD, inc GST
Servo - Generic Metal Gear (Micro Size)
Brand: Sparkfun
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at...
$39.90 AUD, inc GST
Micro Maestro 6-Channel USB Servo Controller (Assembled)
Brand: Pololu
The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this tiny, versatile device will deliver. The fully assembled version ships with header pins installed.
$45.80 AUD, inc GST
9g 180° Metal Servo with Analog Feedback (1.5kg)
Brand: DFRobot
Here comes the new number of our Servo family---a 9g 180° Metal Servo with Analog Feedback. The servo has built-in metal gear that could be much more durable than...
$11.90 AUD, inc GST
9g 270°Metal Servo with Analog Feedback (1.5kg)
Brand: DFRobot
Here comes the new number of our Servo family---a 9g 270° Metal Servo with Analog Feedback. The servo has built-in metal gear that could be much more durable than...
$11.60 AUD, inc GST
DSS-M15S 270° 15KG DF Metal Servo with Analog Feedback
Brand: DFRobot
DSS-M15S servos have been well received by customers in these years. It has extremely wide angle range control, huge load capacity and excellent quality. This DSS-M15S...
$28.95 AUD, inc GST
High Torque Waterproof Metal Gear Digital Servo (35KG, 180°, IP54)
Brand: DFRobot
The digital servo is water-resistant and equipped with 35kg torque and 180-degree control. It boasts copper gears, dual ball bearings. It can be used to...
$36.55 AUD, inc GST
Micro servo - SG92R
Brand: Adafruit
Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any...
$12.75 AUD, inc GST
Kitronik - Movement Module (Simple Servo Controller)
Brand: Kitronik
The Kitronik Movement Module provides a simple way of adding a 180-degree servo to your project without the need for code. The Movement Module is the...
$8.15 AUD, inc GST
4tronix M.A.R.S. Rover Robot for Raspberry Pi Zero
Brand: 4tronix
Take your Raspberry Pi Zero out of this world with this 4tronix M.A.R.S. Rover kit which is loosely based on the Curiosity and Mars 2020 rovers from NASA/JPL, It uses the same rocker arm, bogey, and differential arm mechanism.
$284.95 AUD, inc GST
Sub-micro Servo - SG51R
Brand: Adafruit
This is just about the cutest, tiniest little micro servo Adafruit could find, even smaller than the 9 gram micro servos Adafruit love so much. It can rotate approximately 180...
$11.70 AUD, inc GST
Monk Makes Servo Kit for micro:bit
Brand: Monk Makes
This kit containing three 9g servo motors also includes alligator leads a battery box and the MonkMakes Servo for micro:bit adapter.
$52.45 AUD, inc GST
Servo Commander
Brand: goBilda
Rule the rotation of your servo with the Servo Commander! Its input knob provides real-time servo control while four buttons store.....
$50.20 AUD, inc GST
Kitronik Clippable Servo
Brand: Kitronik
The Kitronik 180 degree rotation clippable servo features crocodile clips instead of a servo connector, durable metal gears, 4 horns and high torque output.
$11.40 AUD, inc GST
Mechanic-Loader for micro: Maqueen
Brand: DFRobot
Note: Maqueen, micro:bit board and battery are not included. Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains...
$21.50 AUD, inc GST
micro:Maqueen Mechanic-Push
Brand: DFRobot
Turn your Maqueen Plus into a bulldozer with this Mechanic-Push kit. Then, it can be used in applications like football match, venue cleaning and so on. Just a simple installation, your Maqueen Lite or Maqueen Plus is ready to go.
$21.50 AUD, inc GST
Micro Servo with Alligator Clips
Brand: Adafruit
This servo is just like our classic Micro Servo but has 3 alligator clip test leads at the end! This makes it perfect for plug-and-play support with any...
$16.05 AUD, inc GST
Maqueen Mechanic - Forklift
Brand: DFRobot
Equip Maqueen Plus with this Mechanic- Forklift kit to allow it to simulate the movement of a forklift! Program it to lift an object, fork and transfer items, just like a real forklift in a factory. It is compatible with Maqueen Lite and Maqueen Plus.
$33.65 AUD, inc GST
Talon Grabber XL PRO for BitBot
Brand: 4tronix
Upgrade your BitBot with the Talon Grabber XL PRO
$26.20 AUD, inc GST
Kitronik Compact 16 Servo Driver Board for the BBC micro:bit
Brand: Kitronik
Take your robotics project to the next level with the Kitronik compact 16 servo driver board for the micro:bit. This board allows up to 16 Remote Control (RC) servos to be driven simultaneously.
$22.80 AUD, inc GST
Micro Maestro 6-Channel USB Servo Controller (Partial Kit)
Brand: Pololu
The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this tiny, versatile device will deliver. Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).
$45.10 AUD, inc GST
Similar matches
Micro Metal Gearmotor 50:1
Brand: DFRobot
This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm.
$11.30 AUD, inc GST
50:1 Micro Metal Gearmotor HP
Brand: Pololu
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 51.45:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 625 RPM and 100 mA free-run, 15 oz-in (1.1 kg-cm) and 1.6 A stall.
$39.95 AUD, inc GST
4tronix Bit:Bot XL Robot for BBC Micro:Bit
Brand: 4tronix
Introducing BitBot XL, taking the much-loved BitBot to the next level. We have made several changes, some subtle, some not so subtle, to give a much-improved experience of using and working with the BitBot.
$85.85 AUD, inc GST
Smart Car Cutebot Robot for micro:bit
Brand: Elecfreaks
This fully-assembled and ready-to-rock robot smart car is the nicest We've seen and is incredibly easy to use with a micro:bit and MakeCode. It comes all ready to go, no soldering or screw-driver required. Simply plug in your :bit into the top slot and add three AAA batteries to get moving.
$56.47 AUD, inc GST
DC Micro Metal Gear Motor w/Driver - 30:1
Brand: DFRobot
An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing and frustrating when you just need something to work quickly. We hope that using the DC Micro Metal gear motor changes this.
$15.75 AUD, inc GST
Micro Metal Gear Motor with Connector (50:1)
Brand: DFRobot
This motor has a long (0.365"/9.27 mm) D-profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6mm diameter, 0.35mm thread pitch), or you can use the mounting bracket or extended mounting bracket, which are specifically designed to securely mount the gear motor while enclosing the exposed gears. We recommend the extended mounting bracket for wheels with recessed hubs, such as the 42×19mm wheel.
$18.80 AUD, inc GST
Micro Metal Gear Motor with Connector (75:1)
Brand: DFRobot
This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6mm diameter, 0.35mm thread pitch), or you can use the mounting bracket or extended mounting bracket, which are specifically designed to securely mount the gear motor while enclosing the exposed gears. We recommend the extended mounting bracket for wheels with recessed hubs, such as the 42×19mm wheel.
$18.60 AUD, inc GST
ELECFREAKS Smart Cutebot Pro Programming Robot Car for micro:bit
Brand: Elecfreaks
This fully assembled and ready-to-rock robot smart car is the nicest we've seen and is incredibly easy to use with a micro:bit and MakeCode. It comes...
$87.94 AUD, inc GST
Kitronik Clippable 360 Degree Servo
Brand: Kitronik
The Kitronik 360 degree rotation clippable servo features crocodile clips instead of a servo connector, Lightweight plastic gears, 4 horns & high torque...
$11.30 AUD, inc GST
DC Micro Metal Gear Motor w/Driver - 50:1
Brand: DFRobot
An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing and frustrating when you just need something to work quickly. We hope that using the DC Micro Metal gear motor changes this.
$21.70 AUD, inc GST
100:1 Micro Metal Gearmotor
Brand: Pololu
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 100.37:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 120 RPM and 40 mA free-run, 12 oz-in (0.9 kg-cm) and 0.36 A stall.
$40.10 AUD, inc GST
10:1 Micro Metal Gearmotor MP
Brand: Pololu
This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 2200 RPM and 40 mA free-run, 3 oz-in (0.2 kg-cm) and 0.7 A stall.
$40.10 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.