Search results for: 'servo cable'

This is a 300mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows.

Extend your servo's reach with this 1m Servo Extension Cable. Featuring male and female JR Style connectors, it's perfect for robotics, RC vehicles, and other DIY/Maker projects. Enjoy seamless connections and added flexibility in cable management – a must-have for any enthusiast's toolkit.

This is a 600mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows.

This is a 150mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows.

This 6-inch (150-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller.

This 24-inch (600-mm), twisted cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

This 1200mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,.....

This 300mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other end so that it can be inserted into screw.....

This 300mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other so that it can be inserted into screw.....

This 12-inch (300-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems. The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 30cm later...

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 50cm later...

This 24-inch (600-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller.

This 12-inch (300-mm), flat cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This 12-inch (300-mm), twisted cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

This 6-inch (150-mm), twisted cable has 22-AWG wires and female “JR”-style connectors on both ends, the same kind of connector commonly found on RC hobby servos. It can be used to make connections between devices with 0.1" 3-pin male headers, such as between RC servo controllers or RC receivers and motor controllers with an RC interface. It can also be a convenient way to connect various 3-pin sensors to a robot controller. The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

This 600mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,...

This 150mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,...

This 300mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,...

This 900mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,...

This 450mm length servo extension will allow you to extend the distance between your servo and servo controller. In servo applications,...

Stretch out your servo connections with this flexible servo to premium male header jumper cable. It has a 3-pin shrouded "male" connector to...

USe this cable to connect two servo to Grove system with only 1 cable. Compatible with RB-421,MG-995,SG-90,SG-5010. More information about how to choose...

This 12-inch (300-mm), flat Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it more flexible than standard servo cables.

This 12-inch (300-mm), twisted Y-cable can be used to split a single RC hobby servo signal into two identical outputs. It has 22-AWG wires terminated on all three ends by “JR”-style female connectors, which are compatible with 0.1" header bins and both male JR and male Futaba J connectors. The split occurs close to the cable’s input, so the two output ends can be separated by up to approximately 18" (450 mm). The cable’s conductors each consist of 60 strands, making it much more flexible than standard servo cables, and the wires are twisted to reduce electromagnetic interference (EMI).

This 100mm length servo extension has TJC8 (MH-FC) connectors on each end. MH-FC means the plastic housing is male and the contacts within.....

This 150mm length servo extension has TJC8 (MH-FC) connectors on each end. MH-FC means the plastic housing is male and the contacts within.....

This 300mm length servo extension has TJC8 (MH-FC) connectors on each end. MH-FC means the plastic housing is male and the contacts within.....

This 150mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other end so it can be inserted into screw.....

This 150mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other so that it can be inserted into screw.....

This 100mm length servo lead has a TJC8 Servo Connector on one end and bare wires on the other so that it can be inserted into screw.....

This 450mm length servo Y-harness has a single TJC8 (MH-FC) connector on one end and a pair of TJC8 (FH-MC) connectors on the opposing...