Search results for: 'hall effect sensor'

50 results

A3213 Hall Effect Sensor

Unlike other Hall-effect switches, either a north or south pole of sufficient strength will turn the output on; in the absence of a magnetic field, the output is off.
$1.70 AUD, inc GST

Hall effect sensor (analog,threshold)

Brand: Core Electronics

Sense invisible magnetic fields around you! Use the adjustable digital output to set a threshold or the analog output to get a gauge of the distance.

$1.80 AUD, inc GST

Hall-Effect Sensor - AH1815 (Non-Latching)

Brand: Sparkfun
The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle...
$1.75 AUD, inc GST

A1102 Hall Effect Sensor

The A1101 Hall-effect switches include the following on a single silicon chip: voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 to 24 V.
$2.70 AUD, inc GST

Hall Sensor

Brand: DFRobot
what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right!This Hall sensor knows whether there is a magnetic object nearby or not. And it correctly tells you through ditigal output.See below picture for a quick demo!
$9.64 AUD, inc GST

ScoutMakes DRV5032 Digital Magnetic Hall Effect Sensor

Brand: Adafruit
This is a breakout for the Texas Instruments DRV5032 Digital Magnetic Hall Effect Sensor. It is the perfect way to add magnetic sensing to your project....
$11.90 AUD, inc GST

Gravity: Linear / Analog Hall Effect Sensor with ±1200 GS Magnetic Field Range

Brand: DFRobot
The Gravity: Linear/Analog Hall Sensor operates at a voltage range of 3.3V to 5V. With a magnetic field range of ±1200 GS, this Analog Linear Hall sensor...
$4.50 AUD, inc GST

Hall Effect Sensor - US1881

Brand: Sparkfun
The US1881 is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A hall effect sensor is much smaller, but can handle less current than a reed switch.
$1.80 AUD, inc GST

Hall effect sensor - US5881LUA

Brand: Adafruit
Hall effect sensors detect whether a magnet is near. Useful for non-contact/waterproof type switches, position sensors, rotary/shaft encoders. I tried dozens of...
$3.95 AUD, inc GST

SparkFun Linear 3D Hall-Effect Sensor - TMAG5273 (Qwiic)

Brand: Sparkfun
The TMAG5273 Qwiic Sensor is a low-power 3D hall-effect sensor that is perfect for detecting and measuring changes in a nearby magnetic field...
$12.70 AUD, inc GST

Digital magnetic sensor

Brand: DFRobot
The magnetic sensor can be used on magnetic (magnet) detection, detection range up to about 3cm (detection range and the strength of the magnetic).
$4.72 AUD, inc GST

SparkFun Mini Linear 3D Hall-Effect Sensor - TMAG5273 (Qwiic)

Brand: Sparkfun
The Mini TMAG5273 Qwiic Sensor is a low-power 3D hall-effect sensor perfect for detecting and measuring changes in a nearby magnetic field...
$13.10 AUD, inc GST

Grove - Hall Sensor (Seeed Studio)

Brand: Seeed Studio
The Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current...
$5.20 AUD, inc GST

Small Black T-Bar Hall Effect Fader - 5V

Brand: Adafruit
You might recognize this interesting new component from behind-the-scenes studio clips of audio recording equipment or even music videos. A fader is a...
$209.95 AUD, inc GST
Similar matches

Door Switch Sensor (Normally Open)

Brand: Core Electronics

Intruder Alert! Detect if a door, window, or drawer is open.

$2.95 AUD, inc GST

Magnetic Contact Switch Sensor for Arduino

Brand: DFRobot
This magnetic switch (reed switch) consists of two magnetic reeds (usually composed of iron and nickel) sealed in a plastic case. The two magnetic reeds are overlapped...
$6.74 AUD, inc GST

Non-invasive AC Current Sensor (30A max) (Seeed Studio)

Brand: Seeed Studio
What is CT sensors Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole...
$9.85 AUD, inc GST

Gravity: Analog AC Current Sensor

Brand: DFRobot
When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this problem. Using induction you can measure AC current without intrusive methods. Place your AC wire inside the unit, connect the unit to the sensor board using the 3.5mm jack connector and connect the sensor board to an analog input on your microcontroller. Use this sensor to measure AC motors, lighting equipment, air compressors or any other devices that use AC current.
$33.10 AUD, inc GST

Gravity: Analog Current Sensor 50A (AC/DC) V2

Brand: DFRobot
This fully integrated Hall Effect based linear SC780 current sensor gives precise measurement for both AC and DC currents up to 50A, suitable for...
$24.60 AUD, inc GST

Gravity: Analog 20A Current Sensor

Brand: DFRobot
This Gravity Analog 20A current sensor is based on the Hall current sensing principle. It can be used for AC or DC current measurement, has a wide voltage range...
$15.29 AUD, inc GST

ACS724 Current Sensor Carrier -10A to +10A

Brand: Pololu
This board is a simple carrier of Allegro’s bidirectional ±10A ACS724LLCTR-10AB Hall effect-based linear current sensor, which offers a low-resistance...
$16.70 AUD, inc GST

SparkFun Current Sensor Breakout - ACS723 (Low Current)

Brand: Sparkfun
The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications...
$33.05 AUD, inc GST

Non-Invasive Current Sensor - 30A

Brand: Sparkfun
This non-invasive current sensor (also known as a “split core current transformer”) can be clamped around the supply line of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding to the magnetic field around a current-carrying conductor. By reading the amount of current being produced by the coil, you can calculate how much current is passing through the conductor.
$31.20 AUD, inc GST

Gravity: BMM150 Triple Axis Magnetometer Sensor

Brand: DFRobot
BMM150 is a low-power and low-noise 3-axis digital geomagnetic sensor from Bosch for compass applications. It allows measurements of the magnetic field...
$15.25 AUD, inc GST

SparkFun Current Sensor Breakout - ACS723

Brand: Sparkfun
The SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing applications. The ACS723 sensor uses...
$22.95 AUD, inc GST

G 1/2" Water Flow Sensor (Seeed Studio)

Brand: Seeed Studio
Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed...
$22.70 AUD, inc GST

ACS724 Current Sensor Carrier 0 to 10A

Brand: Pololu
This board is a simple carrier of Allegro’s unidirectional 10A ACS724LLCTR-10AU Hall effect-based linear current sensor, which offers a low-resistance...
$16.45 AUD, inc GST

Gravity: Analog AC Current Sensor (5A)

Brand: DFRobot
When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. Gravity: Analog AC Current Sensor comes to the rescue...
$33.19 AUD, inc GST

Fermion: BMM350 Triple-Axis Magnetometer Sensor for AR / VR (Breakout)

Brand: DFRobot
The Fermion: BMM350 3-axis geomagnetic sensor is designed to measure magnetic fields across three vertical axes and functions as a compass. Delivers...
$11.41 AUD, inc GST

ACHS-7121 Current Sensor Carrier -10A to +10A

Brand: Pololu
This board is a simple carrier of Broadcom’s bidirectional ±10A ACHS-7121 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mO)...
$17.20 AUD, inc GST

ACS72981ELRATR-200U3 Current Sensor Large Carrier 0A to 200A, 3.3V

Brand: Pololu
This is the large version of a simple carrier for Allegro’s ACS72981ELRATR-200U3 Hall effect-based, electrically isolated current sensor, which offers a...
$28.40 AUD, inc GST

ACHS-7122 Current Sensor Carrier -20A to +20A

Brand: Pololu
This board is a simple carrier of Broadcom’s bidirectional ±20A ACHS-7122 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mO)...
$11.35 AUD, inc GST

Current Sensor Carrier ACS724

Brand: Pololu
This board is a simple carrier of Allegro’s bidirectional ±5A ACS724LLCTR-05AB Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.4 kV RMS. This version accepts a bidirectional current input with a magnitude up to 5 A and outputs a proportional analog voltage (400 mV/A) centered at 2.5 V with a typical error of ±1.5%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.
$16.75 AUD, inc GST

ACS72981LLRATR-050U5 Current Sensor Compact Carrier 0A to 50A, 5V

Brand: Pololu
This is the compact version of a simple carrier for Allegro’s ACS72981LLRATR-050U5 Hall effect-based, electrically isolated current sensor, which offers a...
$23.05 AUD, inc GST

ACS724 Current Sensor Carrier 0 to 30A

Brand: Pololu
This board is a simple carrier of Allegro’s unidirectional 30A ACS724LLCTR-30AU Hall effect-based linear current sensor, which offers a low-resistance...
$16.70 AUD, inc GST

ACS724 Current Sensor Carrier -50A to +50A

Brand: Pololu
This board is a simple carrier of Allegro’s bidirectional ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor, which offers a low-resistance...
$19.30 AUD, inc GST

ACS72981LLRATR-050U5 Current Sensor Large Carrier 0A to 50A, 5V

Brand: Pololu
This is the large version of a simple carrier for Allegro’s ACS72981LLRATR-050U5 Hall effect-based, electrically isolated current sensor, which offers a...
$28.40 AUD, inc GST

Gravity: Analog AC Current Sensor (10A)

Brand: DFRobot

When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. This Gravity: Analog AC Current Sensor comes to the rescue.

$33.07 AUD, inc GST

Fermion: BMM150 Triple Axis Magnetometer Sensor (Breakout)

Brand: DFRobot
The BMM150 is a low-power and low noise 3-axis digital geomagnetic sensor that perfectly matches the requirements of compass applications...
$11.46 AUD, inc GST

Ring Inductive Proximity Sensor (3mm Hole Diameter)

Brand: DFRobot
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer...
$33.77 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.