Search results for: 'esp32 antenna'

50 results

2.4GHz Rod Antenna for XIAO ESP32C3

Brand: Seeed Studio
This is a mini antenna for tiny Seeed Studio XIAO ESP32C3 microcontroller board. With rugged and effective hardware design, the antenna increases the...
$5.90 AUD, inc GST

2.4GHz 6dBi Antenna with u.FL / IPEX Connector

Brand: DFRobot
This might just be the perfect antenna for any 2.4GHz wireless projects. It's an omnidirectional antenna with a u.FL connector (also known as a uFL, IPX, or IPEX RF) to interface with most wireless microcontroller boards.
$8.15 AUD, inc GST

PCB Antenna - U.FL (2.4GHz)

Brand: Sparkfun
This small form-factor antenna offers a 2.4GHz frequency range. These antennas offer adhesive backing that simplifies mounting within the device for a FPC or PCB...
$3.80 AUD, inc GST

Seeed Studio XIAO ESP32S3

Brand: Seeed Studio
Seeed Studio XIAO ESP32S3 leverages dual-core, Xtensa processor with RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. It is a...
$16.10 AUD, inc GST

Seeed Studio XIAO ESP32-C3

Brand: Seeed Studio
Seeed Studio XIAO ESP32C3 is a thumb-sized microcontroller, equipped a highly-integrated ESP32-C3 chip, built around 32-bit RISC-V operating up to 160...
$10.65 AUD, inc GST

XIAO ESP32S3 for Meshtastic & LoRa

Brand: Seeed Studio
This thumb-sized LoRa dev kit, featuring the XIAO ESP32S3 and Wio-SX1262 LoRa module, is an ideal starter kit for Meshtastic and LoRa/LoRaWAN projects. Supporting WiFi, BLE, and LoRa, it includes a built-in power management chip and can be extended via IIC, UART, and other GPIO interfaces, with compatibility for Arduino development.
$21.20 AUD, inc GST

Raspberry Pi Compute Module Antenna Kit

Brand: Raspberry Pi

The Compute Module Antenna Kit is certified for use with Raspberry Pi Compute Module 4 and 5

$7.95 AUD, inc GST

TinyS3 [D] ESP32-S3 Development Board

Brand: Unexpected Maker

Compact ESP32-S3 dev board with switchable onboard/u.FL antenna, USB-C, LiPo charging and CircuitPython pre-installed, programmable with MicroPython, Arduino or ESP-IDF.

$33.49 AUD, inc GST

ESP32 WROOM MCU Module - 16MB (U.FL)

Brand: Sparkfun
ESP32-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding...
$13.35 AUD, inc GST

Adafruit Sparkle Motion with wFL External Antenna - WLED and xLights Board

Brand: Adafruit
The Adafruit Sparkle Motion with wFL Antenna is the flagship in our series of "Sparkle Motion" boards, that are our attempt to make the best .....
$43.60 AUD, inc GST

FireBeetle 2 ESP32-UE (N16R2) IoT Microcontroller (16MB Fl., 2MB PS., Supports Ext Antenna, Wi-Fi & Bluetooth)

Brand: DFRobot
FireBeetle 2 ESP32-UE(N16R2) Microcontroller with External Bluetooth & WiFi Antennas, Features 16M Flash, 2M PSRAM, 802.11 b/g/n, Bluetooth 5.0, Wi-Fi BLE...
$26.25 AUD, inc GST

Adafruit QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port - STEMMA QT

Brand: Adafruit
What has your favorite Espressif WiFi microcontroller, comes with our favorite connector - the STEMMA QT, a chainable I2C port, and has lots of Flash...
$21.70 AUD, inc GST

NanoS3 (Onboard Antenna)

Brand: Unexpected Maker
Your very own NanoS3 with CircuitPython pre-installed
$31.76 AUD, inc GST

ESP32-S2-WROVER-I Module with uFL - 4 MB flash and 2 MB PSRAM

Brand: Adafruit
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth support, and dual 240 MHz cores. Now get ready to take your IoT designs to the next level with the ESP-S2-WROVER-1 WiFi Module!
$6.95 AUD, inc GST

TinyPico V3 USB-C With uFL Connector

Brand: Unexpected Maker
Your very own TinyPICO V3 with MicroPython pre-installed. Comes with unassembled male headers and a JST PH battery connector.
$33.65 AUD, inc GST
Similar matches

ESP32-C3 Mini Dev Board (With Headers)

Brand: Waveshare
Explore the capabilities of the ESP32-C3 Mini Dev Board, a powerhouse with a RISC-V processor, Wi-Fi & BT5 connectivity, and SMD compatibility. Ideal for IoT projects, this compact board offers a 160MHz frequency, multi-function GPIOs, and low-power operation for innovative makers and professionals.
$7.60 AUD, inc GST

ESP32-S3 Mini Development Board

Brand: Waveshare
ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5...
$8.80 AUD, inc GST

ESP32-C3 Mini Dev Board (Without Headers)

Brand: Waveshare
Explore the capabilities of the ESP32-C3 Mini Dev Board, a powerhouse with a RISC-V processor, Wi-Fi & BT5 connectivity, and SMD compatibility. Ideal for IoT projects, this compact board offers a 160MHz frequency, multi-function GPIOs, and low-power operation for innovative makers and professionals.
$6.20 AUD, inc GST

Seeed Studio XIAO ESP32C6

Brand: Seeed Studio
Features Enhanced Connectivity: Combines 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5(LE), and IEEE 802.15.4 radio connectivity, allowing you to apply the...
$12.80 AUD, inc GST

ESP32-C6 Mini Development Board

Brand: Waveshare
ESP32-C6 Mini Development Board, Based on ESP32-C6FH4, Dual Processors, 160MHz Running Frequency, 2.4GHz WiFi 6 & Bluetooth 5, ESP32 Development Board...
$8.45 AUD, inc GST

ESP32-S3 Development Board (1.28inch Round Touch LCD)

Brand: Waveshare
ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor...
$35.05 AUD, inc GST

ESP32-S3 7inch Capacitive Touch Display Development Board

Brand: Waveshare
ESP32-S3 7inch Capacitive Touch Display Development Board, ESP32 With Display, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor, Up to 240MHz...
$72.30 AUD, inc GST

Home Assistant Connect ZBT-2

The Home Assistant Connect ZBT-2 makes it straightforward to get started with Zigbee or Thread with Home Assistant.

$104.95 AUD, inc GST

ESP32-S3 Development Board and 1.28inch Round Touch LCD With CNC Metal Case

Brand: Waveshare
ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor, Round Display, With CNC Metal Case...
$43.95 AUD, inc GST

Olimex ESP32-POE-ISO-EA Development Board

Brand: The Pi Hut
The Olimex ESP32-POE-ISO-EA is an ESP32-powered WiFi/BLE/Ethernet development board with an external antenna, Power-Over-Ethernet, galvanic isolation and...
$69.30 AUD, inc GST

Industrial 6-Channel ESP32-S3 WiFi Relay Module

Brand: Waveshare
Industrial 6-Channel ESP32-S3 WiFi Relay Module, Supports WiFi / Bluetooth / RS485 control, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation...
$52.30 AUD, inc GST

ESP32-S3 4.3inch Touch LCD Development Board

Brand: Waveshare
ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B, 800×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency,...
$78.95 AUD, inc GST

ESP32-S3-Pico Microcontroller (Pre-soldered headers)

Brand: Waveshare
ESP32-S3 Microcontroller with headers, 2.4 GHz Wi-Fi Development Board, dual-core processor with frequency up to 240 MHz…
$15.70 AUD, inc GST

Arduino Nano ESP32

Brand: Arduino
This board brings all the power of the well-known ESP32-S3 with the full support of the Arduino ecosystem, allowing makers to explore the world of Arduino and MicroPython without any blocks.
$31.80 AUD, inc GST

ESP32-C6 Microcontroller

Brand: Waveshare
ESP32-C6 Microcontroller, WiFi 6 Development Board, 160MHz Single-core Processor, ESP32-C6-MINI-1 Module...
$12.80 AUD, inc GST

ESP32 WROOM MCU Module - 16MB (PCB Antenna)

Brand: Sparkfun
The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most...
$7.30 AUD, inc GST

ESP32-S3 2inch Display Development Board with camera

Brand: Waveshare
ESP32-S3 2inch Display Development Board, 240×320 Pixels, IPS Panel, 262K color, 32-bit LX7 Dual-core Processor, Up To 240MHz Frequency, Supports WiFi &...
$30.45 AUD, inc GST

ESP32-S3 Development Board, Onboard 8×8 RGB LED Matrix and QMI8658C Attitude Sensor

Brand: Waveshare
ESP32-S3-Matrix Development Board, Onboard 8×8 RGB LED Matrix and QMI8658C Attitude Sensor, supports Wi-Fi and Bluetooth LE, ESP32 Development Board...
$15.65 AUD, inc GST

ESP32-S3-WROOM-1-N4 Module (PCB Antenna)

Brand: DFRobot
ESP32-S3-WROOM-1 is a powerful, generic Wi-Fi+ Bluetooth LE MCU module that is built around the ESP32-S3 series of SoCs...
$6.95 AUD, inc GST

ESP32­-S3­-DevKitC-1 - ESP32-S3-WROOM-2 - 32MB Flash 8MB PSRAM

Brand: Adafruit
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth LE MCU module that...
$47.55 AUD, inc GST

ESP32 Servo Driver Expansion Board

Brand: Waveshare
ESP32 Servo Driver Expansion Board, Built-In WiFi And Bluetooth...
$26.50 AUD, inc GST

ESP32-S3 Development Board and 1.28inch IPS Round LCD With CNC Metal Case

Brand: Waveshare
ESP32-S3 Development Board, 32-bit LX7 Dual-core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch IPS Round LCD, 240×240 Resolution,...
$34.35 AUD, inc GST

ESP32-S3-DevKitC-1-N8 - ESP32-S3-WROOM-1 Dev Board - 8MB Flash

Brand: Adafruit
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that...
$36.45 AUD, inc GST

ESP32 Dual Antenna WiFi + Bluetooth Module with 8MB FLASH - ESP32-WROOM-DA-N8

Brand: Adafruit
ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth Classic + Bluetooth LE MCU module, with two complementary PCB antennas in...
$13.95 AUD, inc GST

ESP32-C3-MINI-1-N4 Module (PCB antenna)

Brand: DFRobot
ESP32-C3-MINI-1 are a general-purpose Wi-Fi and Bluetooth LE modules. The rich set of peripherals and a small size make the two modules an ideal choice...
$8.60 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.