Search results for: &#039;electrode&#039;

Have your next project be controlled by your muscles with this pack of Muscle Sensor Surface EMG Electrodes! Pair the electrodes with the MyoWare Muscle Sensor and...

Muscle Sensor Surface EMG Electrodes - H124SG Covidien - Pack of 6

Brand: Adafruit

$11.70 AUD, inc GST

Gravity: Heart Rate Monitor Sensor

The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG and output as an analog reading. An ECG signal can be extremely noisy so we have included an AD8232 chip on the PCB which will provide a clear signal from the PR and QT Intervals. Using the Arduino IDE "Serial Plotter" feature you are also able to view plotted ECG output on your PC!

$32.88 AUD, inc GST

Gravity: Analog ORP Sensor PRO

As an upgraded version of industrial Gravity: ORP Sensor Meter For Arduino, this new generation ORP probe employs platinum indicator electrode and...

$225.81 AUD, inc GST

Industrial pH Electrode - Armor Casing

This pH combination electrode is made of sensitive glass membrane with low impedance.It can be used in a variety of PH measurements with fast response, good thermal stability.It has the good reproducibility, difficult to hydrolysis, and basically eliminate the alkali error .In 0 to 14pH range,the output voltage of the electrode is linear.The reference system which consist of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance.The ring PTFE membrane is not easy to be clogged, so the electrode is suitable for long-term online detection.

$92.11 AUD, inc GST

Gravity: Flexible Piezo Film Vibration Sensor

This is an Arduino compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility...

$9.89 AUD, inc GST

Gravity: Analog Spear Tip pH Sensor / Meter Kit (for Soil and Food Applications)

This spear tip pH sensor/meter kit can directly stab into semisolid material to measure the pH value. It can be used to measure pH value of wet soil and various...

$168.96 AUD, inc GST

Gravity: Analog Waterproof Capacitive Soil Moisture Sensor

This is a new type of analog capacitive soil moisture sensor designed by DFRobot. Compared with the old soil moisture sensor, it has increased waterproof performance...

$23.63 AUD, inc GST

EMG Muscle sensor - with electrodes

Brand: Core Electronics

Measure the power your muscles are pushing with this biometric sensor!

$27.70 AUD, inc GST

Sensor Cable - Electrode Pads (3 connector)

This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.

$17.60 AUD, inc GST

The Kitronik Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor moisture present in soil.

Kitronik Prong Soil Moisture Sensor for BBC micro:bit

Brand: Kitronik

$7.80 AUD, inc GST

AD8232 Single Lead Heart Rate Monitor

The AD8232 Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a clear signal from the PR and QT Intervals easily.

$40.60 AUD, inc GST

Gravity: Analog EMG Sensor by OYMotion

This EMG sensor is launched by the cooperation of DFRobot and OYMotion, which can detect sEMG to reflect muscle and neural activities of human. This sensor integrates...

$81.75 AUD, inc GST

Gravity: Analog Electrical Conductivity Sensor /Meter V2 (K=1)

DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of aqueous solution, and then to evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.

$121.65 AUD, inc GST

This is an easy to use and cost-effect PH sensor/meter, suitable for Arduino and Raspberry Pi, support 3.3V and 5V system...

Grove - PH Sensor Kit (E-201C-Blue )

Brand: Seeed Studio

$45.10 AUD, inc GST

Capacitive Touch Breakout - AT42QT1010

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.

$6.90 AUD, inc GST

MODBUS-RTU RS485 Soil Moisture, Temperature & EC Sensor (IP68, 5-30V)

Accurate measurements of soil temperature, moisture, and electrical conductivity are provided by the soil sensor. Data communication is facilitated via...

$64.73 AUD, inc GST

MODBUS-RTU RS485 Soil NPK Measure Sensor (IP68, 5-30V)

The Industrial soil sensor provides precise measurements of soil nitrogen, phosphorus, and potassium. Data is relayed via the MODBUS-RTU protocol on RS485...

$97.39 AUD, inc GST

MODBUS-RTU RS485 4-in-1 Soil Moisture, Temperature, pH & EC Sensor (IP68, 5-30V)

The integrated 4-in-1 soil tester is an IP68-rated sensor for soil temperature, moisture, pH, and EC monitoring. Ideal for agriculture, environmental...

$113.59 AUD, inc GST

MyoWare 2.0 Cable Shield

The MyoWare 2.0 Cable Shield allows you to test and use the MyoWare 2.0 Muscle Sensor without actually attaching the board to your person...

$10.35 AUD, inc GST

SparkFun Capacitive Touch Slider - CAP1203 (Qwiic)

Do you want to replace a slider or a button on your art project or science experiment with a more interesting interface? This Capacitive Touch Slider is a "Qwiic"...

$13.60 AUD, inc GST

Gravity: Analog Electrical Conductivity Sensor PRO (K=1)

This Gravity: Analog Electrical Conductivity Sensor PRO (K=1) has greatly improved the probe endurance, which allows it to offer 24/7 service for...

$332.34 AUD, inc GST

MyoWare 2.0 Reference Cable

The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin...

$2.30 AUD, inc GST

Conductive Thread - 60g (Stainless Steel)

This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great way to get into wearable electronics without a large upfront cost and a large enough quantity to not be afraid of making a few mistakes.

$159.95 AUD, inc GST

MODBUS-RTU RS485 Soil EC and pH Monitoring Sensor (IP68, 5-30V)

The 2-in-1 integrated soil sensor features reliable soil pH and EC monitoring. Ideal for agriculture and soil data collection. Compatible with Arduino UNO...

$103.01 AUD, inc GST

SparkFun Capacitive Touch Breakout - AT42QT1011

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1011 SparkFun Capacitive Touch Breakout offers...

$9.15 AUD, inc GST

Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino

This is a dissolved oxygen sensor kit, which is compatible with Arduino...

$279.26 AUD, inc GST

This product is a cost-effective ORP sensor and easy to utilize, suitable for Arduino and Raspberry Pi, supports 3.3V and 5V system...

Grove - ORP Sensor Kit (501Z)

Brand: Seeed Studio

$92.10 AUD, inc GST

Out of stock

Conductive Stainless Thread (7Ω)

This is a smooth stainless steel fiber conductive sewing thread. One roll has 5m sewing thread, and about 7Ω per 1m. The diameter of the wire is 0.5mm....

$12.41 AUD, inc GST

Conductive Stainless Thread (9Ω)

This is a smooth stainless steel fiber conductive sewing thread. One roll has 7m sewing thread, and about 9Ω per 1m. The diameter of the wire is 0.45mm....

$12.41 AUD, inc GST

The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin...

MyoWare 2.0 Reference Cable - 10 pack

$25.25 AUD, inc GST

Conductive Stainless Thread (10-15Ω)

This is a smooth stainless steel fiber conductive sewing thread. One roll has 10m sewing thread, and about 10-15Ω per 1m. The diameter of the wire is 0.42mm....

$12.43 AUD, inc GST

Gravity: Analog Electrical Conductivity Sensor / Meter(K=10)

DFRobot Gravity: analog electrical conductivity sensor/meter(K=10) is particularly used to measure the high electrical conductivity liquid, such as seawater, concentrated...

$133.18 AUD, inc GST

MyoWare 2.0 Muscle Sensor Development Kit

The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, EMG sensor kit that provides you with every board from the MyoWare ecosystem...

$264.95 AUD, inc GST

Out of stock

Conductive Material Pack

Start your creative DIY project with this high-quality wire pack! The pack contains several kinds of conductive materials that basically meet your common needs of...

$39.56 AUD, inc GST

MODBUS-RTU RS485 Soil Temperature, Humidity and pH Monitoring Sensor (IP68, 5-30V)

The soil sensor delivers precise readings of soil temperature, moisture, and pH. It transmits data using MODBUS-RTU protocol via RS485 and is built for...

$97.14 AUD, inc GST

RS485 Fluorescence Dissolved Oxygen Sensor (Seawater)

Measure DO in seawater with this RS485 fluorescence sensor. IP68, maintenance-free, and ModBus-ready. Ideal for mariculture and ocean monitoring...

$330.72 AUD, inc GST

Similar matches

Biometric sensor (Heart rate, Pulse oximeter)

Brand: Core Electronics

You've probably used sensors to check in on the environment, but have you ever read your pulse? Literally, sense each heartbeat with this heart rate and pulse oximeter sensor.

$4.80 AUD, inc GST