Search results for: 'battery fuel gauge'

50 results

Adafruit MAX17048 LiPoly / LiIon Fuel Gauge and Battery Monitor - STEMMA JST PH & QT / Qwiic

Brand: Adafruit
Low cost Lithium Polymer batteries have revolutionized electronics - they're thin, they're light, they can be regulated down to 3.3V and...
$11.70 AUD, inc GST

Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitor - STEMMA JST PH & QT / Qwiic

Brand: Adafruit
Low cost Lithium Polymer batteries have revolutionized electronics - they're thin, they're light, they can be regulated down to 3.3V and they're easy to charge. On your phone, there's a little image of a battery cell that tells you the percentage of charge - so you know when you absolutely need to plug it in and when you can stay untethered
$13.80 AUD, inc GST

Gravity: I2C 3.7V Li Battery Fuel Gauge

Brand: DFRobot
3.7V lithium batteries are commonly used in many projects. However, the remaining power and voltage of the lithium battery are highly nonlinear. We can only roughly...
$17.58 AUD, inc GST

UPS HAT (E) for Raspberry Pi

Brand: Waveshare
UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins Connector...
$59.20 AUD, inc GST

Raspberry Pi 5 18650 Battery UPS HAT (5.1V 5A)

Brand: DFRobot
The 5.1V 5A Raspberry Pi 5 power supply UPS HAT features a 4-cell 18650 battery holder for extended operation. Offers seamless power switching, automatic...
$101.10 AUD, inc GST

USB Charger Doctor - In-line Voltage and Current Meter (Blue)

Brand: Core Electronics
Oh no, what is going on with my USB device, it's getting HOT. Queue the USB Charger Doctor. Thanks to this little gadget you will be able to watch and care for your USB device or powered projects.
$2.80 AUD, inc GST

Mini Power Meter with Voltage, Current, Watts, mAh & mWh Display

Brand: Adafruit
This Mini Power Meter with Voltage, Current, Watts, mAh & mWh Display (whew that is a mouth-full) is a lot like the USB In-Line Voltage and Current Meter We carry...
$47.60 AUD, inc GST

KWS-V20 USB Tester - Current/Voltmeter

Brand: Core Electronics

Test your USB connectors using the USB Tester module, it can read...

$6.20 AUD, inc GST

SparkFun Thing Plus - ESP32-S3

Brand: SparkFun
The SparkFun ESP32-S3 Thing Plus adds a powerful and versatile IoT development platform to the Feather-footprint Thing Plus line...
$49.30 AUD, inc GST

Raspberry Pi UPS HAT

Brand: DFRobot
DFRobot Raspberry Pi UPS HAT is an uninterruptable power supply shield for Raspberry Pi. It can provide steady power source to Raspberry Pi for an extended period...
$27.14 AUD, inc GST

UPS HAT for Raspberry Pi Zero

Brand: DFRobot
DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue...
$37.29 AUD, inc GST

SparkFun Battery Babysitter - LiPo Battery Manager

Brand: SparkFun
The SparkFun Battery Babysitter is an all-in-one single-cell Lithium Polymer (LiPo) battery manager. It’s half battery charger, half battery monitor, and all you’ll ever need to keep your battery-powered project running safely and extensively.
$39.90 AUD, inc GST

USB Voltage Meter with OLED Display

Brand: Adafruit
This USB In-Line Voltage and Current Meter with OLED Display is a lot like the Charger Doctor We carry - if the doctor was a talented surgeon who just lost her medical...
$36.50 AUD, inc GST

Single Li-Ion and LiPoly Battery Power Meter

Brand: Adafruit
This small, palm-sized battery power meter has a small display that shows off how much juice is left in your single Lithium Ion/Polymer rechargeable...
$6.40 AUD, inc GST

Wio Terminal Chassis - Battery (650mAh)

Brand: Seeed Studio
The Wio Terminal Battery Chassis is a must-have extension board for Wio-Terminal Dev Board as it provides an external power source for Wio Terminal to...
$44.20 AUD, inc GST

Qduino Mini V2

Brand: SparkFun
The Qduino Mini V2 is a tiny, Arduino-compatible board with a battery connector and charger built-in as well as a fuel gauge that can tell you when to charge the battery! This little guy is super small, inexpensive, and is perfect to embed in your electronics projects. The Qduino Mini V2 is the same model awarded to its Kickstarter backers and is Arduino-compatible and 100% open source, meaning that making and programming your first circuit is a breeze.
$58.90 AUD, inc GST

LED Voltage Meter (Green)

Brand: DFRobot
This is a standalone DC voltage meter. It measures 4.5V-30V with 1% accuracy. Best suitable for battery level display.
$3.86 AUD, inc GST

AWS IoT ExpressLink SARA-R5 Starter Kit V2

Brand: SparkFun
The AWS IoT ExpressLink SARA-R5 Starter Kit provides all you need to connect a device to AWS IoT Core over a cellular LTE-M network...
$329.95 AUD, inc GST

SparkFun MicroMod Asset Tracker Carrier Board

Brand: SparkFun
The SparkFun MicroMod Asset Tracker Carrier Board provides you with a toolkit to monitor and track the location of your assets. Built around the u-blox SARA-R510M8S...
$249.95 AUD, inc GST
Similar matches

Digital Multimeter - Basic

Brand: SparkFun
The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. The SparkFun Digital Multimeter, however, is not your average multimeter, it features a loud continuity sound, current/voltage sense, and quality probes. You can use the multimeter to measure DC and AC voltage, DC current, resistance, continuity, and test diodes. With this version we’ve done away with the bright flashy colors that can get us into trouble and gone with a nice, neutral gray. This multimeter should provoke no strong feelings one way or the other, we know this because our guts say “maybe.”
$43.90 AUD, inc GST

LiPo Voltage Tester and Buzzer

Brand: Core Electronics

Monitor your LiPo batteries!

$2.40 AUD, inc GST

TinyS3 [D] ESP32-S3 Development Board

Brand: Unexpected Maker

Compact ESP32-S3 dev board with switchable onboard/u.FL antenna, USB-C, LiPo charging and CircuitPython pre-installed, programmable with MicroPython, Arduino or ESP-IDF.

$33.49 AUD, inc GST

Battery Holder - 2x18650 (wire leads)

Brand: SparkFun
This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with this battery holder you will gain the ability to incorporate 18650 cells into applications like robotics or prototyping by simply dropping one into this device and attaching the leads, that’s it.
$3.60 AUD, inc GST

Gravity: I2C Digital Wattmeter

Brand: DFRobot
Gravity: I2C Digital Wattmeter is a high-resolution, high-precision, large-scale measurement module that can measure the voltage, current and power of various electronic...
$11.30 AUD, inc GST

Dual Digital Display DC Voltmeter & Ammeter 0-100V 0-10A

Brand: Core Electronics
An all in one solution for monitoring voltage and current.
$5.25 AUD, inc GST

4 x AA Battery Holder with On/Off Switch

Brand: Adafruit
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off...
$7.70 AUD, inc GST

Digital Display DC Voltmeter 0-100V Blue

Brand: Core Electronics
Wide supply voltage range and measuring range. 3 wire interface that can be configured as a 2 wire interface if required.
$6.45 AUD, inc GST

Arduino Nicla Vision

Brand: Arduino

Deploy computer vision at the edge faster than ever, with our ready-to-use, standalone intelligent camera.

$139.95 AUD, inc GST

NiMh / NiCad USB AA / AAA Battery Charger

Brand: Core Electronics
Charges up to four AA/AAA or 2 x 9V Ni-MH or Ni-Cad cells at once for keeping your devices powered up. Indicators display charging mode at a glance. Automatically stops once cells are charged. Powered by any USB charger at home or in the car.
$21.55 AUD, inc GST

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST-PH

Brand: Adafruit
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is slim, and 3 AAA's add...
$5.40 AUD, inc GST

2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch

Brand: Adafruit
This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate...
$4.10 AUD, inc GST

6xAA Battery Holder(double layer)

Brand: DFRobot
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.
$2.17 AUD, inc GST

LED Voltage Meter (Red)

Brand: DFRobot
This is a standalone DC voltage meter. It measures 4.5V-30V with 1% accuracy.
$3.15 AUD, inc GST

Dual Digital Display DC Voltmeter & Ammeter 0-100V 0-100A

Brand: Core Electronics
An all in one solution for monitoring voltage and current.
$16.95 AUD, inc GST

Digital Display DC Voltmeter 5-30V Blue

Brand: Core Electronics
A self-powered voltmeter that operates over a wide voltage range. Only 2 wires are needed to interface this device with the target circuit.
$6.45 AUD, inc GST

Solar Power Manager For 12V Lead-Acid Battery

Brand: DFRobot
The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management...
$47.30 AUD, inc GST

2 x AAA Battery Holder with On/Off Switch & JST PH Connector

Brand: Adafruit
This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is nicely slim, and 2 AAA's...
$4.65 AUD, inc GST

12V Battery Health Analyzer (NiMH, 3000mAh)

Brand: goBILDA
While they don’t often show it on the outside, batteries are just as susceptible to wear over time as any other part of your robot. The.....
$83.20 AUD, inc GST

EdgeS3 [D] Re-usable Dev Board

Brand: Unexpected Maker

A compact ESP32-S3 module suited for a side-entry M.2 connector for re-usable carrier boards - great for prototyping.

$31.85 AUD, inc GST

2 x AA Battery Holder with On/Off Switch & JST PH Connector

Brand: Adafruit
This battery holder connects 2 AA batteries together in series for powering all kinds of projects. Adafruit spec'd these out because the box is fairly slim, and 2 AA's...
$5.50 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.